Hana modsista juttua joku kääntäny.
-
Not fully compatible with below 2.8ohm resistors. (The chip can't do 20W with a 1.5Ohm load)
-
The chip drains the battery even when he's not using it.
- 510 threads of dubious quality.
- Atomizers don't screw all the way in. There's a noticeable gap between the device and the atty.
- The trigger button is unnecessarily hard (it even came of within a week of use).
- Dubious quality of the epoxy-like glue inside.
- Solder connections to the battery tray badly done (he had to resolder the battery connections).
- The spring of negative pole of the battery tray is too weak.
- No advanced features like Stealth mode or inversion of the screen.
----------------------------------------------------------------------------------------------------------------------------------
Here are my test results: It shows 20 Watts, but I only got 15 and ONLY if the resistance was above 2 Ohms. Below that the highest reading I got was like 12,5 Watt.
e: Eli siis vamokin on tehoiltaan melkeinpä parempi

Jos on tilannu jo niin kannattaa 2 kertaa miettiä odottaako parempaa.