VAPORL.COM - Official Latest Deals & New Arrivals Daily Updates

[vaporl]

July Flash Sale: SMOK G-PRIV 2, Eleaf iCare Mini, SMOK S-PRIV 230W Box Mod, As low as $1.99Hey, guys, here comes our latest vape flash sale, as low as $1.99, up to 80% offAleader COMBO/LIMITLESS RDTA PLUS Resin Drip Tip $1.99Eleaf iCare Mini with PCC Starter Kit $4.9WISMEC Motiv DS NC Replacement Coil 0.25ohm $4.9Artery Lady Q Kit $9.9SMOK S-PRIV 230W Box Mod $29.9SMOK G-priv 2 Box Mod Touch Screen $49.9click to check in Vaporl Daily Flash SALE

[vaporl]

New: AFK STUDIO EASY ONE EDA RDA Tank|3 Seconds To Build Coil
AFK STUDIO EASY ONE EDA RDA Tank Atomizer

We proudly introduce the AFK STUDIO EASY ONE EDA RDA to you! The EASY ONE EDA is an easy dripping atomizer from AFK STUDIO EUGENE. It mainly comes with the 0.15ohm finished atomizer coil which could been replaced in just 3 seconds, so you need not to make the cotton and the wire by yourself any more. EASY ONE atomizer simplifies the oil dripping atomizer and lows the using difficulties of the normal atomizers. Plus the adjustable side airflow design, the AFK STUDIO EASY ONE easy dripping atomizer will bring you great taste.


Feature:
Diameter: 24mm
Stainless steel construction;
Resistance: 0.15ohm;
Juice well capacity: 2ml;
Replaceable pre-built coils;
Dual post build deck;
Adjustable side airflow;
PEI wide bore drip tip included


Click to see more detail about AFK STUDIO EASY ONE EDA RDA Tank Atomizer


Related RDAs:
Digiflavor Drop Solo RDA Tank

The Drop Solo is the latest game changing RDA designed by Brian from The Vapor Chronicles YouTube channel. It is the single coil 22mm version of the original 24mm DROP RDA, which has been widely recommended as the best RDA in the industry. What's more, 24mm beauty ring included to create seamless design with larger devices. The Drop Solo RDA features 2 large post holes allowing for easy coil placement, and maximum build space with open access to trim excess. The post holes have also been designed with a notch to trap round wire builds with ease. And the horizontal side airflow control with 6 air holes that can adjust the airflow you want, while maintaining an ultra smooth, flavorful and whistle free experience.


Feature:
2 large post holes for easy building
Perfect control of airflow to offer smooth flavor
Deep juice well base to avoid leakage
Two different caps to meet different needs
Regular 510 pin and a squonk 510 pin


Click to buy Digiflavor Drop Solo RDA Tank


Hellvape DROP DEAD RDA Tank

Say hello to the new Hellvape Drop Dead RDA! Inheriting from Dead Rabbit RDA, the Drop Dead RDA is a new flavor chasing RDA with 24mm diameter and colorful resin drip tip. With an innovative proven build deck for single coil or dual coils building, you can easily DROP your coils in and trim coil legs after installation. What's more, the Drop Dead RDA adopts an intelligent high side downward sloping airflow with 14 side airflow holes to maximize flavor, minimize leaking and bring you an extremely smooth and tasty vaping experience.


Feature:
Diameter: 24mm;
A proven build deck to easily DROP your coils in and trim coil legs after installation;
Intelligent high side downward sloping airflow to maximize flavor and minimize leaking;
14 airflow holes for a turbulent free pull and worry free purging;
Deep juice well is convenient for dripping or squonking with maximum leak resistance;
Internal barrel lock for easy removal;
Knurled top cap to adjust airflow with ease;
Smart airflow design will hit the center of your coils every time;
2 high quality 810 drip tips and 510 drip tip adapter;
Standard positive pin and raised BF squonk 510 pin included;
Single or dual coil builds can be placed with ease




Shop Hellvape DROP DEAD RDA Tank in $29.9

[vaporl]

[Pre-Sell]Hellvape DROP DEAD RDA, Digiflavor Drop Solo RDA Tank Atomizer|Design By TVC
Hellvape DROP DEAD RDA TANK

The Drop Dead RDA was designed by The Vapor Chronicles and Hellvape x Heathen. The Vapor Chronicles and Digiflavor brought us the Drop RDA and Hellvape x Heathen brought us the Dead Rabbit RDA. They took the best features from the Drop RDA and Dead Rabbit RDA and created the Drop Dead RDA. The 24mm Drop Dead RDA features 4 large postholes with ample space underneath to clip the leads. The 14-hole top airflow design flows down towards the build deck and provides a very smooth and quiet experience. The Drop Dead is extremely versatile in that it can be used as an MTL RDA or for cloud comps. The extra deep juice well and top airflow design allows for easy dripping or squonking with minimum leaking.


Features:
Designed by vaping heathen & the vapor chronicles
24mm diameter
Single & dual coil configuration
Side airflow system
510 pin and squonk pin included


Click to buy Hellvape DROP DEAD RDA TANK Atomizer


Digiflavor Drop Solo RDA Tank Atomizer

The Digiflavor Drop Solo 22mm RDA is a collaborative effort between Digiflavor and TVC, the Vapor Chronicles. The Digiflavor Drop Solo RDA presents itself as a single coil build deck for a simplified building experience. The Drop Solo features horizontal side airflow control with 10 air holes on each side that are fully adjustable based on user preference. A conical top cap design has been implemented which enhances the flavor and also includes a optional PMMA low profile cap for user option. This package includes a bottom feeder pin and gold plated 510 connections that allow juice to fill both sides of the well at the same time. With its airflow control and convenient build deck, the Digiflavor Drop Solo RDA Tank with 22 diameters is a stylish, high-functioning rebuildable atomizer at an affordable price.


Feature:
Come with Bottom feed positive BF pin
Easy Coil replacement & open access to trim excess
2 different sized top cap & mid cap
2 sets of different style postscrews
Removable gold plated positive &negative posts
Standard 510 and Raised BF Squonk 510 pin
1 Clapton coil (0.2 Ω) & original cotton


Click to order Digiflavor Drop Solo RDA Tank Atomizer

[vaporl]

Giveaway: SMOK G-Priv Baby Kit Luxe Edition, TFV12 Prince Cobra Edition Tank
Here comes our latest giveaway contest, the SMOK G-Priv Baby Kit Luxe Edition, TFV12 Prince Cobra Edition Tank, there are total 2 winners. click Vape Giveaway to see more.


SMOK G-Priv Baby 85W Starter Kit

The stunning Smok G-Priv Baby kit is one of the most gorgeous vaping set-ups around and the Luxe edition is just that little bit more special! The G-Priv Baby is hitting a max of 85w powered by a single 18650 battery and topped with the gorgeous TFV12 Baby Prince – this has the looks and power. The TFV12 Baby Prince utilizes the new TFV8 Baby Beast coil family, coming with a 0.4ohm V8 Baby-Q4 Quadruple Coil rated at 30W to 65W and 0.4ohm V8 Baby-Q2 Dual Coil rated at 40W to 80W for pure flavor and smooth taste.


Date: 07.19-08.02
Winner: 1 x SMOK G-Priv Baby 85W Starter Kit Luxe Edition


Click to win SMOK G-Priv Baby Kit Luxe Edition Now!


SMOK TFV12 Prince Cobra Sub Ohm Tank

The SMOK TFV12 Prince Cobra Sub-Ohm Tank is the revolutionary update to the high-performance TFV12 Prince series, integrating an exquisite Cellular Mesh wall sleeve and the ability of Magic Gradient changing colors as you vape (select colors only). Maintaining similar chassis structure with intricate details on the bottom and top base, the TFV12 Prince Cobra Edition maintains the high-quality SMOKTech's craftsmanship. Each set comes with a bulb glass that features 7mL of maximum juice capacity, with the addition of acrylic bulb tube and acrylic drip for additional accessories! The TFV12 Prince Cobra has the upgraded rotary hinge top-fill method, with the implementation of a new locking mechanism that can be accessed when pushing the lock button.


Contest Time:07.10 - 07.23
Winner: 1 x SMOK TFV12 Prince Cobra Edition Tank


Click to win SMOK TFV12 Prince Cobra Edition Tank For Free.

[vaporl]

$9.9 For SMOK TFV8 X-Baby, Aspire Quad-Flex Survival Kit
SMOK TFV8 X-Baby Tank $9.9

The SMOK TFV8 X Baby Tank is an upgraded version of the Smok TFV8 Baby Beast tank. Still utilising the classic TFV8 top fill design, the 24ml capacity X-Baby features two large top airflow slots and a 24.5mm diameter for better mod pairing. The Airflow can be adjusted freely by a simple turn of the airflow control ring situated at the top of the tank. The X-Baby Tank houses the unique and powerful X-Series coils. Included with this tank are the pre-installed X-Baby Q2 0.4 ohm coil and a spare X-Baby M2 0.25 ohm coil giving a fantastic sub ohm vape.


Specification:
Capacity: 4ml
Size: 59mm(H) x 24.5mm(D)
Material：Stainless Steel
Thread Connector：510


Order SMOK TFV8 X-Baby Tank in $9.9


Aspire Quad-Flex Survival Kit $9.9

The Aspire Quad Flex Survival Kitt is a highly versatile four-in-one system, presenting four distinct methods of vaping such as the Nautilus X sub-ohm method, RDA style, squonk RDA, and a RDTA dripping approach, along with a plethora of accessories to complete the truly dynamic package. The Quad Flex Survival Kit was developed by Aspire through continued research and development, offering a complete range of atomizer configurations within a streamlined kit. It includes two deck bases as well as sleeves, top caps, and drip tips for the ultimate mix-and-match to create a wide array of vaping options while maintaining ergonomic form factor. The kit begins with a fully assembled RDTA setup, featuring two-post, dual terminal design with single or dual airflow option alongside 2 milliliter tank capacity that can be filled either through the wicking ports or removal of the deck and top cap.


Features
4 quick fit configurations
Quad-Flex RDTA
Quad-Flex RDA
Quad-Flex Squonker
Nautilus X Tank
Dual Coil Velocity Style Deck
Adjustable airflow sleeves


Click to order Aspire Quad-Flex Survival Kit in $9.9


IJOY Elite PS2170 100W Kit $19.9

The IJOY Elite PS2170 100W Kit features long standby time, personalized big size fire button on the side, 0.96-inch LED screen and 100W output power. It also supports large size tanks, USB charging and firmware upgradable. Captain Mini is a 3.2ml/ 2ml Subohm Tank with 22.5mm diameter. It comes with a convenient sliding top filling design, unique Groove chassis to reduce heat transmission, dual adjustable bottom airflow and a Delrin wide bore drip tip.


Specifications:
Tank Capacity: 3.2ml
Diameter: 22.5ml
Max Wattage: 100W
Battery Type: High-rate 18650 battery(2200mah) with adapter, (Continuous discharge current should be above 25A)
high-rate 20700 battery(3000mah)
(Continuous discharge current should be above 40A)
high-rate 21700 battery(3750mah)
(Continuous discharge current should be above 40A)


Shop IJOY Elite PS2170 100W Kit in $19.9


SMOK GX350 350W TC Kit $39.9

The Smok GX350 Kit is a combination of the GX 350 Mod and the TFV8 Cloud Beast Tank. Reaching up to 350W when powered by 4 x 18650 batteries, the GX 350 Mod also supports firmware upgrades through the Micro USB Port. The included TFV8 Cloud Beast Tank is the class-leading sub-ohm tank in its category, implementing 6mL juice capacity, unique patented SMOK Turbo Engines coil structure, adjustable dual bottom airflow, signature hinged top-fill system, and heat-spoofing Delrin ultra-wide drip tip.


Specifications:
Thread: 510
Battery: 18650*4(not included)
Size: 58x40.4x84.5mm
Max Output Power: 350W (Within 4x 18650 )
Tank Capacity: 6ml(Max)
Tank Size: 24.5x69mm
Material: Stainless Steel


Order SMOK GX350 350W TC Kit in $39.9


Click to see more Vape Flaslh SALE

[vaporl]

[New]CoilART SALT RTA Tank Atomizer |7-levels airflow Holes For MTL
CoilART SALT RTA Tank Atomizer

CoilART SALT RTA Tank Atomizer is a good choice for vaping with regular e-juice and nic salts. With 18mm diameter, Salt RTA is made of SUS304 SS in sleek design, and it has 2ml juice capacity or 3ml capacity with bulb glass tube. The two-posts deck is easy for building single coil, and the 7-levels airflow control system ensures various great vaping experience for you. This RTA is refilled from top, and both its top cap and airflow ring have knurled design for easier operation. Moreover, it comes with 5pcs pre-cut cottons, 2pcs 0.65ohm Fused Clapton Coils for e-juice, 2pcs 1.15ohm pre-built coils for low nic salts and 2pcs 1.6ohm pre-built coils for high nic salts.


Specification:
Size: 18 x 47mm height
Juice Capacity: 2.0ml & 3.5ml with bubble tube
Top-fill tank
510 drip tip
M2.5x3 build screws
SUS304 SS construction
Easy single coil build
PEEK insulator
Adjustable airflow


Click to see more detail about CoilART SALT RTA Tank Atomizer


Vandy Vape Berserker MTL RTA Tank

The Vandy Vape Berserker MTL RTA is the ultimate mouth to lung RTA inspired by Alex from Vapers MD. The Berserker RTA features superior flavor and incredible precision airflow control. With five different airhole sizes available catering to your personal airflow preferences, features a dual post clamp build with two post holes designed for single coil builds. The Berserker RTA also includes a 510 "Pawn" ULTEM and Delrin drip tip for an improved mouth to lung vaping experience.


Feature:
24mm Diameter
Stainless Steel & Pyrex Glass Construction
Top Fill Design
2ml / 4.5ml Tank Capacity
Designed For MTL Single Coil Configurations
2 Post Deck Design
Single Adjustable Bottom Airflow Control
Assembling Locking Screw


Click to buy Vandy Vape Berserker MTL RTA Tank


Digiflavor Siren V2 MTL GTA Tank

The Siren V2 GTA, specially made for MTL (mouth to lung) vaping, provides a closer sensation to smoking cigars and conventional cigarettes. Highly recommended as one of the best MTL atomizers by the vaping community, the Siren has been upgraded to provide a more precise MTL experience. The Siren V2 GTA is structured with chamber closer to drip tip, which will provide you with the purest flavor.


Specifications
Height: 44 mm without drip tip | 41.5 mm (TPD version)
Diameter: 24 mm or 22 mm (TPD version)
Capacity: 4.5 mL or 2 mL (TPD version)
Colors: Gunmetal, Blue, Black, Stainless Steel


Click to order Digiflavor Siren V2 MTL GTA Tank

[vaporl]

Vapefly Core RTA Tank Atomizer|Design By Vapefly& German 103Vapefly Core RTA Tank AtomizerVapefly Core RTA is designed by German 103 Team. It features arc-shaped dual posts and bottom multi-holes design to create powerful "Q" airflow system, thus delivering flavorful and large clouds without heat. It has 2ml e-juice capacity. With the bubble glass, the e-juice capacity can be extended to 4ml. It is easy to refill with top filling design, and is super easy to build for single coil and dual coils.Feature:German 103 team design304 stainless steel constructionPMMA 510/810 drip tipEasy top filling2ml & 4ml for capacityGlass tubePowerful”Q” airflow system delivery great flavor without heatA cloud monsterSuper easy building: single coil & dual coil 510 threading connection25.2mm overall diameterClick to order Vapefly Core RTA Tank AtomizerAugvape Intake RTA TankThe Augvape Intake RTA with 24mm diameter features two airflow tubes to direct the air from top to the bottom of the coil to bring maximum flavor, which is one of the reason why it is called Intake RTA. It comes with a 4.2ml bubble glass tubes and a 2.5ml straight glass tube, and designed as leakage proof and easy top filling system. The build deck has two posts design with open channels for easy single coil building. Including low profile resin drip tip and a tall Delrin drip tip, the 510 drip tip can also be used with the included 510 adapter.Specs and Features:Co-designed by Augvape and Mike Vapes24mm diameter4.2ml or 2.5ml capacityTop airflow in, bottom airflow outTwo-posts deck with open channels for single coilsLeak proof designTop fillClick to order Augvape Intake RTA TankVandy Vape Revolver RTA Tank AtomizerThe Vandy Vape Revolver RTA is one of the finest creations yet from the masters at Vandy Vape. The Revolver is a genius RTA, offering a fantastic option for those after excellent performance from a rebuildable tank. The airflow system is immensely innovative, using a single coil rebuildable structure. This RTA is crafted of the highest quality stainless steel, and has a very functional 25mm diameter. The Revolver RTA has a top-terminal adjustable, built-in air hole design, which allows you to control the airflow by rotating to customize greater flavor or vapor production, depending on your preferences. Though highly advanced, this deck is excellent to rebuild. The bottom feeding pin, and the two glass tube sections allow you to personalize your use of this RTA in exactly the way you want to. Features:Unique 120° revolving airflow design with different air hole types to choose3ml tank capacity (2ml with the silicone) with 5ml replacement bubble glass tubeDetachable structure, easy to cleanConvenient top filling system, convenient to use25mm diameter, compatible with most box mods Shop Vandy Vape Revolver RTA Tank Atomizer Now!

[vaporl]

2018 Top 5 Vape Kits Under $50
SMOK ProColor 225W Kit $49.9

The ProColor kit features super large OLED colorful screen of 1.3 inch with high definition. The Smok Pro Color 225 implements the most advanced technology and innovative designs with new designed software interface, a fire bar of ergonomic hand feel design, and the included sub ohm tank is the world famous and beloved TFV8 big baby tank. Powered up by 2) 18650 batteries, along with firmware upgrades, the Smok ProColor 225W TC Vape Starter Kit is nothing short of incredible, and sure to keep the vaping at an incredible level.


Specifications:
Liquid Capacity: 5ml
Thread: 510
Power Range: 6W-225W
Battery Type: 2 x 18650
Standby Current: <500uA
Input Voltage: 6.4V-9V
Output Voltage: 0.5V-9.0V
Resistance Range: 0.1Ω-3Ω(VW)/0.06Ω-3Ω(TC)
Temperature Range: 200°F-600°F/100°C-315°C


Click to buy SMOK ProColor 225W Kit in $49.9


WISMEC CB-60 60W Starter Kit $29.9

The Wismec CB-60 MTL Starter Kit is a specialized vape systems designed for high nicotine and Nicotine Salts E-Liquids, presenting a built-in 2300mAh rechargeable device to pair with the mouth-to-lung focused AMOR NS MTL Tank. It is integrated with 2300mAh rechargeable battery with Dual Circuit Protection and a 2A quick charge. The internal onboard is highly intelligent, capable of firing up to 60W of maximum power with the utilization of 0.91 Inch OLED display for an efficient operational usage. The included AMOR NS Tank is built for a tighter draw experience, featuring a new 1.5ohm WS03 MTL Coil in horizontal orientation as well as 2mL juice capacity, convenient threaded top-fill, and stealth bottom airflow control.


Features:
Wismec CB-60 Box Mod
Internal 2300 mAh Battery
Charged via Micro USB
Maximum Wattage Output: 60w
Minimum Firing Resistance: 0.1 ohm
Ergonomic & Compact Design
Various Color Options Available


Wismec Amor NS Sub Ohm Tank
Overall Diameter: 22mm
Maximum E-Juice Capacity: 2ml
Mouth To Lung Atomizer
Includes a WS03 MTL 1.5 ohm coil head
Standard 510 Connection Pin


Shop WISMEC CB-60 60W Starter Kit in $29.9


Wismec SINUOUS FJ 200 Starter Kit $37.9

Wismec SINUOUS FJ200 with DIVIDER is an internal dual battery device that comes with a large 1.3 inch OLED screen. Hailing desgin cues from the original Wismec Predator 228, it updates centered 510 thread and features an innovative temperature protection technology. Wismec SINUOUS FJ 200 mod is capable of running up to 200W with 4600mAh built-in battery that brings you a great vaping experience. Wismec Divider atomizer rivals the look of the new sinuous FJ200 with the convenient top fill system. Also it has a juice capacity of 2ml to 4ml and packs a powerful WS series coil will provide you with better vaping flavor.


Feature:
1. Innovative temperature protection system for safer charging
2. Centered 510 spring loaded connector
3. 4600mAh built-in battery with 200W max output
4. 1.3inch large display with 2A quick charge
5. Powerful WS series coils & 2ml/4ml options
6. Hidden fire button with green indicator light


Buy Wismec SINUOUS FJ 200 Starter Kit in $37.9


Joyetech eVic Primo Mini Kit $33.5

The Joyetech eVic Primo Mini Starter Kit is an ultra portable and lightweight version of the original eVic Primo series. The eVic Primo Mini features a new flexible and improved 510 contact pin designed for 4 to 5.5mm long pins. The eVic Primo Mini is a single 18650 battery mod that fire ups to 80 watts and supports nickel, titanium and stainless steel 316 in temperature control mode. The eVic Primo Mini also has a bypass mode, preheat function and stealth function as well. The ProCore Aries features dual adjustable airflow slots for increased vapor production. This tank includes (1) ProC1 0.4ohm atomizer head which is designed for a direct lung vaping experience.


Specifications:
Size: 25.0mm*39.0mm*127.5mm
Battery using: 1*18650(Not included)
Output range: 1-80W
Output modes: Power/Bypass/Start/Temp(Ni, Ti, SS316)/TCR(M1, M2, M3)
Temperature control: 100-315°C/ 200-600°F
Tank Size: 25.0mm*52.0mm
E-liquid capacity: 4.0ml
Colors: Silver, Black, Red, Yellow, Blue


Order Joyetech eVic Primo Mini Kit in $33.5


Eleaf iKonn 220 220W TC Kit $29.9

The Eleaf iKonn 220 supports dual 18650 batteries with a maximum power of 220W. It has a big 0.91 inch screen that offers a concise and clear interface with two separate battery bars. It features a battery balancing trickle charge system and a 2A quick charge capability. The innovative RC adapter will convert the iKonn 220's 510 connection into a USB output for power bank mode. The ELLO atomizer that features new powerful HW coils and retractable top fill system, pairs with the iKonn 220 perfectly for cloud chasers.


Parameters
Size: 44mm*28mm*135mm (with ELLO 4ml type)
44mm*28mm*126mm (with ELLO 2ml type)
Output wattage: 1-220W
Maximum charging current: 2A
Maximum output current: 50A
Thread type: 510 thread
Battery type: high-rate 18650 cells (not included)
Continuous discharge current should be above 25A)
Output mode: VW/TC(Ni,Ti,SS,TCR-M1,M2,M3)
Resistance range: 0.05-1.5ohm (TC modes) / 0.1-3.5ohm (VW mode)
Temperature range: 100－315℃/200－600℉(TC modes)


Buy Eleaf iKonn 220W TC Kit in $29.9

[vaporl]

Best 85W Vape Kit: Vaporesso Tarot Baby, G-Priv Baby or iStick Pico 25 Kit
Vaporesso Tarot Baby 85w Starter Kit

Vaporesso Tarot Baby Kit with NRG SE Tank is an elegent device consisting of the Tarot Baby Mod and the NRG SE Tank. It adopts OMNI Board 4.0, providing high performance. Powered by 2500mAh built-in battery, it is capable of firing up to 85W. It supports 0.002s firing rate, promising big cloud and oringal flavor. The ingenious NRG SE Tank works with the GT Meshed Coil to give a richer and smoother flavor. The perfect combiation of Vaporesso Tarot Baby Mod and the NRG SE tank is bound to bring you an enduring vaping experience.


Feature:
1.Insta-Fire：0.002s
2.2A Quick Charge: Dramatically shorten your charging time.
3.Omni Board 4.0 - The safest chipset
4.0.96’ color screen with a hidden fire button
5.NRG Tank with child-proof function


Click to buy Vaporesso Tarot Baby 85w Starter Kit


SMOK G-Priv Baby Kit Luxe EDITION

Here comes the new member of G-Priv family, G-Priv Baby Luxe Edition, a small and delicate stunner, whose highly sensitive 2.0 inch touch screen provides you outstanding man-machine interaction experiences. This new luxury noble is compact and ergonomically designed with stylish and elegant high-gloss finish. Equipped with a top battery slot, battery replacement becomes more convenient. G-Priv Baby Luxe Edition can offer up to 85 watts of power and can be matched with TFV12 Baby Prince tank, bringing you dense cloud and pure flavor.


Specifications:
Tank Capacity: 4.5ml
Size: 23 x 53.7mm(tank), 72 x 51 x 29.2mm(mod)
Power Range: 1W-85W
Battery Type: 1 x 18650
Standby Current: <250μA
Output Voltage: 0.5V-9.0V
Resistance Range: 0.1Ω-2.5Ω(VW)/0.05Ω-2Ω(TC)
Temperature Range: 200°F-600°F/100°C-315°C


Click to order SMOK G-Priv Baby Kit Luxe EDITION


Eleaf iStick Pico 25 Starter Kit

The Eleaf iStick Pico 25 85W TC Starter Kit is the latest rendition of the critically acclaimed iStick Pico platform, retaining the core design language while upgrading upon the chipset with 85W of maximum power and innovative functionalities such as Preheat setting to pair with the new ELLO Sub-Ohm Tank. The iStick Pico 25 implements a larger form factor from the original, capable of accommodating atomizer with diameters up to 25mm while maintaing the compact, rounded contour single-18650 chassis that fits comfortably in-hand. The physical aesthetics of the device has been updated, offering a range of dual colorways and the enlargement of the intuitive OLED display for efficient operational usage. The onboard chipset is notably powerful, capable of firing up to 85W of output alongside a comprehensive temperature control suite with TCR adjustments. Furthermore, there is a preheat functionality that allows users to fine-tune the desire output for a truly versatile performance piece. The ELLO Sub-Ohm Tank is included with each kit, measuring 25mm in diameter with a juice capacity of 2mL accessed via a convenient retractable top-fill system. It utilizes the latest HW Series Coils, with the 0.2ohm HW1 Single-Cylinder rated for 40 to 80W and the 0.3ohm HW2 Dual-Cylinder with a range of 30 to 70W.


Features
Dimensions: 25 x 48 x 104mm (W x D x H)
Output mode: TC-Ti / TC-Ni / VW / SS-Stainless Steel / TCR / Bypass
Output wattage: 1 - 85W
Resistance range: 0.05 - 1.5 ohms for TC mode
Resistance range: 0.1 - 3.5 ohms for VW / Bypass Mode
Temperature range: 100 - 315C / 200 - 600F
Battery: 1 x 18650 (Not Included)
Ventilation Holes for Improved Heat Dissipation
Compatible with tanks up to 25mm in Diameter
Dual Circuit Protection
Firmware Upgradeable
2A Quick Charging
Tank Capacity: 2ml or 4ml with Included Parts
Retractable Top Fill System
Two Drip Tip Options


Shop Eleaf iStick Pico 25 Starter Kit Now!


Vaporesso Revenger Mini Starter Kit

The Vaporesso Revenger Mini 85W TC Starter Kit is the compact rendition of the breathtaking Revenger series, integrating a massive 2500mAh internal battery while utilizing the OMNI Board 2.2 with a suite of advanced functionalities to pair with the NRG SE Sub-Ohm Tank. Maintaining the elegant chassis of the Revenger, the Revenger Mini 85W Box Mod is constructed with an In-Mould Labeling (IML) injection on the futuristic aluminum alloy shell design with a more portable, travel-friendly size. The chipset is updated with the latest Vaporesso OMNI Board 2.2, adapting to modern functionalities with versatile modes such as Customized Curve of Wattage (CCW) and Customized Curve of Temperature (CCT). It also features Bypass Mode, Smart Variable Wattage Mode, and TCR Adjustments for additional standard methods of power. Paring with the Revenger Mini is the new Vaporesso NRG SE Sub-Ohm Tank, featuring 3.5mL juice capacity, Slide-n-Fill top-fill design, dual bottom airflow control, and the utilization of GT Cores.


Specifications:
Power Range: 5 - 85W
Battery: 2500mAh built-in battery
E-juice Capacity: 3.5ml
Voltage Range: 0.05-5ohm
Temperature Control Range: 100-315°C/ 200-600°F
Output Modes: Smart VW(H/N/S), CCW, CCT, VT(NI, TI, SS), TCR(M1, M2), RCT, BYPASS


Click to order Vaporesso Revenger Mini Starter Kit

[vaporl]

Aspire ZQ Vi Vape Pod Kit|Innovate CSA Technology, Honeycomb & Spiral Airflow
Aspire ZQ Vi Vape Pod Kit

Aspire ZQ Vi Vape Pod Kit is the latest pod device by Aspire, features 650mAh built-in battery and 2ml refill cartridge. Comes wih a vape pen size, the ZQ Vi Starter Kit utilizes an innovate CSA(Celluar Spiral Airflow) technology, honeycomb and spiral airflow design for smoother flavor. Equip with 2ml capacity replacement and 1.4ohm coil with organic cotton suits for general flavor juice, delivers nice flavor. There are two adjustable voltage modes for your opotion, including constanct voltage mod and full power output mode. Available in 4 colors.


Feature:
Pod capacity: 2ml
Battery capacity: 650mah
Size: 85.7*14.4*34mm
Coil resistance: 1.4ohm
Coil: cotton coil
Voltage: 3.5V, 4.2V
Wattage: 7W-13W
Colors: black,red,grey,blue


Click to see more detail about Aspire ZQ Vi Vape Pod Kit


Innokin EQ Vape Pod Kit

The Innokin EQ Pod System is one of the most dynamic vape pod platform to date, presenting an adjustable Regular - Boost Mode to ramp up power alongside a 2mL EQ Refillable Pod featuring a 0.5ohm Plexus EQ Coil with MTL Mesh design. The Innokin EQ Ultra Portable Pod System maintains a functional design, utilizing a single firing button that can be clicked three times in rapid succession to power the device on and off. The provided Boost Mode ramps up the wattage up to 15.5W from the Regular 13.5W to boost the power that goes into the coil and maximizes the flavor and vapor production. Integrated within the single button is an LED indicator light, displaying a white LED representing a moderate to good charge while a red light will indicate that the 800mAh device must be charged soon. the Innokin EQ deploys a new 0.5ohm Plexus EQ Coil within the 2mL refillable pod, implementing one of the first Mesh coil design in a pod system catering to MTL users.


Feature:
Ultra Compact design
800 mAh built-in rechargeable battery
Vape while charging feature
EQ Refillable leak proof pods
2ml TPD Compliant
0.5 Ohm Plexus EQ Mesh coils
Adjustable Modes: Regular 13.5w / Boost 15.5w
Battery Life indicator
3 Click ON/OFF
Magnetic Design (prevents falling)
Dust Cap Cover


Click to buy Innokin EQ Vape Pod Kit


IJOY AI Pod System Kit

IJOY AI Pod Kit is an ultra portable pod system kit in compact size of 28*13*90.5mm. With 15W max output. IJOY AI Pod has built-in 450mAh battery and 2ml e-liquid capacity, and inside the advanced IWEPAL control chipset integrates stable vaping and protections. Through the USB port, it only takes 45min to fully charge the kit, and the LED light shows the battery life. In a word, it's a good choice for simple vaping, and the 1.6ohm coil head delivers pure smooth vaping.


Features
1. Portable pod device with 450mAh battery
2. Fashion and compact appearance design
3. Adopt IWEPAL control chip
4. Easy filling operation
5. Support USB quick charging


Click to see more detial about IJOY AI Pod System Kit

[vaporl]

Hottest Rebuildable Tank: Hellvape Drop Dead RDA, Dead Rabbit RTA and Digiflavor Drop Solo RDA
Hellvape Dead Rabbit RTA TANK

Hellvape Dead Rabbit RTA is a fully comprehensive 24mm rebuildable tank atomizer collaborated design by Vapin' Heathen and Hellvape with CNC engravings on the wall sleeve. The Dead Rabbit features four post build deck with gold plated positive posts and a 5mm deep juice well, and is capable of running both single and dual coil options and each terminal has side mounted hex flathead screws, which are both included. Airflow enters the Dead Rabbit RDA via top-side diagonal adjustable airflow which focuses on flavor and minimizes leaking. The airflow can be adjusted for both single and dual coil options and a knurled grip allows for adjustment of the airflow with ease. To offer a better vaping experience, there is an 810 wide bore drip tip and Dead Rabbit Logo on the glass tube.


Features
1. Large E-juice Capacity
2. Top airflow system
3. Easy-to-build deck
4. 810 wide bore drip tip included


Click to se more detail about Hellvape Dead Rabbit RTA TANK


Hellvape Drop Dead RDA Tank Atomizer

The Drop Dead RDA was designed by The Vapor Chronicles and Hellvape x Heathen. The 24mm Drop Dead RDA features 4 large postholes with ample space underneath to clip the leads. The 14-hole top airflow design flows down towards the build deck and provides a very smooth and quiet experience. The Drop Dead is extremely versatile in that it can be used as an MTL RDA or for cloud comps. The extra deep juice well and top airflow design allows for easy dripping or squonking with minimum leaking. The inside of the barrel of the Drop Dead has been notched to make it easier to remove and replace the top cap without the deck spinning.


Features:
-Internal barrel lock for easy removal.
-Knurled top cap to adjust airflow with ease.
-A proven build deck to easily DROP your coils in and trim coil legs after installation.
-Intelligent high side downward sloping airflow to maximize flavor and minimize leaking.
-14 airflow holes for a turbulent free pull and worry free purging.
-Deep juice well is convenient for dripping or squonking with maximum leak resistance.
-Smart airflow design will hit the center of your coils every time.
-2 high quality 810 drip tips and 510 drip tip adapter.
-Standard positive pin and raised BF squonk 510 pin included.


Click to buy Hellvape Drop Dead RDA Tank Atomizer


Digiflavor Drop Solo RDA Tank

The Digiflavor Drop Solo RDA makes it easier than ever to play around with a wide range of options. This highly versatile and incredibly durable atomizer comes with loads of exciting features that the advanced vapers will enjoy. Combining a gorgeous visual design with a durable build, the GeekVape x Digiflavor Drop Solo has what it takes to satisfy your advanced vaping needs. A single coil build deck boasts a wide range of horizontal airflow options along with a two-optional frame structure: Stainless Steel and PMMA Low Profile Cap. The extra deep juice well has fill ports located on the top as well as the bottom. The combination of airflow control and a convenient build deck make this RDA a no-brainer to use.


Features:
- two large post holes
- easy coil installation
- stepped airflow design
- top cap with lock mechanism
- deep-seated liquid tray
- 510er / Squonker pin
- two different 810 drip tip
- 510 drip tip adapter


Order Digiflavor Drop Solo RDA Tank Atomizer Now!

[vaporl]

Horizon Falcon Tank List: Falcon Sub Ohm Tank,Falcon Resin Tank Artisan Edition,Falcon Resin Tank
Horizon Falcon Resin Tank Artisan Edition

Horizon Falcon Sub Ohm Tank Resin Artisan Edition is an innovative and beautiful designed sub ohm tank from Horizon, which provides high performance and a classy feel. Made of new resin material, features the convenient top filling and adjustable bottom airflow system, the Falcon Resin Artisan Edition Tank has 7ml juice capacity with buld glass tube, and the included 5ml tube in package. Equip with latest M-Triple mesh coil, features 0.2ohm resistance, supports 95w output wattage for better flaovr and longer lifespan. Adopts new liquid element, absorben cotton to solve leaking prolem. Besides, the Horizon Falcon Resin Artisan Edition Tank also fits for M1/M2 Falcon Coil, vapors can choose the best one in their favor. Comes with high-end and elegant apperance, the Horizon Falcon Resin tank Artisan Edition will bring you smooth flavor and amazing vaping experience. Available in 6 colors.


Feature:
Diameter: 25mm
Tank Capacity: 5ml
Bubble Glass Expansion Capacity: 7ml
Resin Frame
Pyrex Glass Reinforcement
M-Triple mesh coil 0.2ohm
Threaded Top-Fill Design
Dual Adjustable Bottom Airflow
Resin Widebore Drip Tip
510 Drip Tip Adapter


Click to see more detail about Horizon Falcon Resin Tank Artisan Edition


Horizon Falcon RESIN Edition Tank

HorizonTech Falcon Sub-Ohm Tank Resin Version has the same parameters with the Falcon Tank Original Version, which features convenient top refilling system and bottom adjustable airflow. It comes with 5ml and 7ml standard edition and the new M2 mesh coil made of wood pulp and cotton will bring you better vaping experience. It has 0.16 coil resistance, and it runs at 70-80W. Also, another extra M1 coil is included for you to have different enjoyment. Working with the different Falcon coils, the Horizon Falcon Resin tank will bring you the constant peak flavor you are dreaming of.


Features
Dimensions: 28 x 55mm (D x H)
Construction: Colorful Resin Body and Pyrex Glass
Tank Capacity: 7ml
Dual Bottom Adjustable Airflow Control
Airflow Fully Closeable
2 Drip Tip Options
High-Heat Resistance
Vertical Coil Orientation
0.16 ohm M2 Vape Coil
Compatible with Standard and Mesh Coil
Recommended Wattage: 70 ± 10W
Gold-Plated 510 Connection


Click to buy Horizon Falcon RESIN Edition Tank


Horizon Falcon Sub Ohm Tank

The Horizon Falcon Sub-Ohm Tank features an upgraded liquid guiding system which allows for increased flavor and life duration in the Falcon atomizer heads. The Horizon Falcon atomizer heads utilizes a special combination of cotton and wood pulp material which helps spread the e-liquid more evenly for a more consistent vaping experience. This special combination helps send e-liquid straight to the coil improving flavor and most importantly of all, your overall vaping experience. The Falcon is a 5.0ml e-Liquid capacity tank with a convenient twist off top fill design that features dual fill holes. The Falcon features triple airflow slots that may be adjusted using the bottom airflow control valve. The Falcon is topped off with a colored resin 510 drip dip with a unique pattern. No two resin products will ever have the same design and look due to the unique manufacturing process.


Features
Constant peak flavour
Top Filling System
Adjustable bottom airflow
Different options of coils
Resin drip tip


Order Horizon Falcon Sub Ohm Tank Now!

[vaporl]

Geekvape Creed RTA Tank, Augvape Intake RTA, UD Zephyrus V2 RTA Tank
Geekvape Creed RTA Tank

The Geek Vape Creed 25mm RTA is a revolutionary design in the rebuildable tanks sector, integrating an interchangeable airflow system, spacious two-post build deck, and an impressive 6.5mL maximum juice capacity. The GeekVape Creed RTA is fashioned from superior stainless steel and has a dynamic airflow system, allowing users to change the three different types of inner airflow chambers to match the preferred vaping style. External airflow enters the structure through three external airslots, fully adjustable by the AFC ring to deliver intense flavor and dense clouds. The spacious build deck hosts a two-post design, implementing large terminal openings to accommodate a plethora of coil leads. The convenient top-fill method is accessed by unscrewing the threaded top cap to reveal a large fill port, featuring a 4.5mL juice capacity that can be increased to a whopping 6.5mL of eLiquids with the bulb glass.


Specs:
Size:50x25mm
Capacity: 4.5ml (spare glass), 6.5ml (Bubble glass)
3 way interchangeable airflow system
Easy to build deck for single or dual coils
Top fill


Click to buy Geekvape Creed RTA Tank Atomizer


Augvape Intake RTA Tank Atomizer

The Auguvape Intake RTA is a leak-proof 24mm rebuildable tank atomizer with two tubes to direct the air from the coils, from top to bottom. It has a juice capacity of 4.2mL with the bubble glass tank section, and a standard tank capacity of 2.5mL. With both a RESIN and Delrin drip tips, you can use the 510-drip tip with the 510-adapter. Not only that, but the Auguvape Intake RTA is able to produce some incredible clouds. The two-post build deck allows you to easily place your coils and the two air tubes on the build deck, bringing airflow directly under the coil to maximize flavor production.


Features:
1. Leak Proof
2. Bottom Airflow Direct To The Coil
3. Single Coil RTA
4. Max Juice Capacity 4.2 ML
5. Super Easy To Build
6. 24mm Diameter


Order Augvape Intake RTA Tank Atomizer Now!


UD Zephyrus V2 RTA Tank Atomizer $7.9

Following on from the success of the first Zephyrus Youde bring us version 2 now with improved top fill design and larger RBA deck. Features include a spiral airflow chamber and Drip tip provide greater vapour production along with a re-designed airflow control base for increased flavour and unique design to prevent excessive condensation. The Zephyrus V2 uses the original V1 wide range of coils, choose from temperature control Nickel, sub ohm and standard resistance. All with Koh Gen Doh 100% Organic cotton and top quality wires.


Specifications:
1).Capacity: 6.5ml
2).Size: D22mmx65mm
3).Available Resistance: 0.2ohm(20W-45W), 0.3ohm(20W-50W), 0.5ohm (20W-50W),1.8ohm, 0.15ohm Ni200


Shop UD Zephyrus V2 RTA Tank Atomizer in $7.9

[vaporl]

Freemax Mesh Pro Tank Metal Edition, Horizon Falcon Sub Ohm Tank Resin Artisan Edition
Freemax Mesh Pro Tank Metal Edition

Freemax Mesh Pro Tank Metal Edition is coming! It is another line up of Mesh Pro tank with new edition providing more choice for you. Freemax Mesh Pro is the world’s first vape sub ohm tanks with first and triple mesh coil integrated huge vapors and pure flavors, supporting higher wattage output even between 80-110W. Mesh Pro Metal Edition is constructed from stainless steel that is comfortable in hand, which supports large 6ml e-juice capacity and wood pulp cotton for great adsorb to satisfy your daily needed. There are 5 colors available.


Features and Specs:
Diameter: 25mm
Gold Plated 510 Contact Pin
5.0ml e-Liquid Capacity (6.0ml with Bulb Replacement Glass)
Retractable Top Fill Design
Vent Hole Design for Accelerated Refilling and Added Leak Resistance
Glass Tank
Stainless Steel and Resin Construction
Dual Airflow Slots
Bottom Adjustable Airflow Control Valve
Utilizes Mesh Pro Kanthal Mesh Atomizer Heads for Variable Wattage
Increased Surface Area for More Flavor and Vapor Production
Includes (1) Mesh Pro Double Mesh Coil 0.2ohm Atomizer Head (Pre-installed) (Designed for 60 - 90W)
Includes (1) Mesh Pro Single Mesh Coil 0.15ohm Atomizer Head (40 - 70W)
Matching 810 Wide Bore Drip Tip with U-Shape Anti-Spitback Design
810 Drip Tip Compatible


Click to see more detail about Freemax Mesh Pro Tank Metal Edition
Order Freemax Mesh Pro Replacement Coil Now!


Horizon Falcon Sub Ohm Tank Resin Artisan Edition

HorizonTech Falcon Resin-Artisan Tank is the brand new atomizer from Horizon. 3 holes mesh coil,0.2ohm,95W,brings better flavor and longer lifespan, compatible with the existed Falcon tanks. With the convenient top filling and adjustable bottom airflow system, it is always the convenient atomizer for vaping. New liquid guiding element provides absorbent cotton to avoid leaking element. And new resin material, it's more stronger and cleaner. High-end and elegant appearance and stereoscopic pattern, Falcon Resin-Artisan Tank will bring the constant peak flavor.


Features
1. The resin colorful body
2. M-Triple mesh coil(0.2ohm, 70W-95W)
3. 5ml, 7ml E-juice capacity
4. Top filling design


Buy Horizon Falcon Tank Resin Artisan Edition Now!
Order Horizon Falcon M-Triple Mesh coil Now!

[vaporl]

New Release: Aspire Dynamo 220W TC Kit|2.0 inch OLED Screen
Aspire Dynamo 220W TC Kit

Aspire Dynamo 220W Kit is a flexible and powerful kit which comes with a unique appearance and supports different types of batteries. It can be powered by dual 18650/20700/21700 batteries to run up to 220W power. The mod supports various modes, you can switch them between Wattage, Voltage, Bypass, CPS (C1/C2/C3), TC(Ni/Ti/SS316L) and TCR(M1/M2/M3). The Dynamo mod comes with a large and clear circular screen to display parameters of device such as output modes, system, time etc. It also supports 11 different types of watch UI to expand your choices. Multiple protections ensure the safety. The Nepho tank will produce excellent cloud and flavor by applied with 0.5ohm Kanthal or 0.15ohm mesh coil. 4ml e-liquid capacity available, top filling design makes refilling easier.


Specification:
Dimension: 137x49x34mm
Tank Capacity: 4ml
Display: 0.2 inch TFT Batteries: 18650, 20700, 21700 Battery (not included)
Coil Resistance: 0.5ohm/0.15ohm
Maximum Output: 220W


Click to see more detial about Aspire Dynamo 220W Kit


Vaporesso Polar 220W Kit

Vaporesso Polar Starter Kit powered by the OMNI Board 4.0 has cut the firing time to 0.001s, and such instant firing speed brings you the richest and purest taste in every puff. This board equips Polar with high play ability for both Super Player Mode and Bypass Mode. At the same time, 9 different protections are contained to guarantee your safety. Driven by two 18650 batteries, this 220W kit supports 2.5A quick charge, the speediest speed to shorten charging time. And the intelligent display and Cascade Baby SE offers you better user experience.


Feature:
Dual 18650 battery with 220W max output
Perfect Prismatic Appearance with 2'' TFT display
0.001s Quick Firing Speed
Upgraded OMNI Board 4.0 Chipset to Ensure High Performance
Unique Isolation Structure of Cascade Tank to Intense Flavors
Revolutionary Triangular Airflow to Produce Denser Cloud
Top Fill System with Safety Lock Mechanism
Unique GT Mesh Coil to Enlarge Heating Area and Offer Great Flavor
Compatible with All GT cores
Optional 6.5ml and 2ml E-juice Capacity
2.5A Quick Charge


Click to order Vaporesso Polar 220W Kit


Innokin Proton 235W TC Kit

Innokin introduces the Proton 235W TC Starter Kit, featuring an upgraded 235W chipset with a full temperature control suite, a large side firing panel, and a unique joystick selector. The Proton is capable of 6 to 235W of output, with a 0.05 to 3.5 Ohm atomizer resistance. Located under the colored TFT screen is an ergonomic joystick control. Wattage output of the device can be controlled with a simple up and down motion on the joystick and locking the device is as simple as three clicks. Additional control combos can be viewed on the quick reference booklet provided with the device. Dual high amperage 18650 batteries (sold separately) are housed in a slide-to-open battery access door located at the bottom of the device, along with a micro-USB port also allows you to charge the dual batteries for up to 2 amps. This kit features the Scion II Sub-Ohm Tank with Innokin's new Plexus Coil Technology, 0.15 mesh coil for use from 60 to 100W that provide with greater longevity, flavor, and stronger throat hit. This Sub-Ohm Tank comes pre-installed with 0.36 Ohm quad vertical coils for use from 80 to 150W that have excellent flavor.


Specifications:
Product Dimensions: 85*44.6*29.6mm
Minimum / Maximum Wattage: 6.0W–235W
Minimum / Maximum Voltage: 0.0V–9.0V
Temperature Control range: 150℃–315℃/300℉–600℉
Maximum Charge Current: 2A
Maximum Output Current: 40A
Atomizer Resistance Range: 0.05ohm – 3.5ohm
1.45″ TFT Color Screen Display
Joystick Selector Button
Side-Panel Squeeze Fire Button
6 Color Display Themes
Individual Cell Battery Life Indicator
Stainless Steel 510 Threading
Dual 18650 Batteries


Check out Innokin Proton 235W TC Kit here.

[vaporl]

New Release: Lost Vape Orion Starter Kit, Vandy Vape Pulse X Squonk Kit
Lost Vape Orion Starter Kit

The Lost Vape Orion Starter Kit is a compact vape kit with an elegant shape. Features an interchangeable built-in battery and top filling design, the Lost Vape Orion Kit will satisfy your daily vape. Lost Vape Orion kit has a large refillable cartridge, providing one of the most range for a perfect travel-size system, with an visual e-liquid window to observe easily. The convenient e-liquid filling way and funny shape design brings you a great enjoyment, and the innovative structure take you a better flavor taste. Come to see more detail about Lost Vape Orion Starter Kit.


Vandy Vape Pulse X Squonk Kit

The Vandy Vape Pulse X Squonk Kit is the newly project deisgn by Tony B. and Vandy Vape, features intelligent fire button, locking power safety switch, which is very convenient for customer to use. As this is a regular squonker, the Vandy Vape Pulse X BF Kit works with single battery for a powerful output wattage. Including Pulse X RDA tank for easy to build, features an impressive side airflow design for nice flavor and huge vapor. More information will come soon.


Feature:
Deisgn By Tony B.
Regulated Squonker Kit
Built-in Squonk Bottle
Compact Size


Click to see more detail about Vandy Vape Pulse X Squonk Kit


Kanger JUPPI 75W Starter Kit

The Kanger Juppi 75W TC Stealth Starter Kit is one of the most compact and ergonomic platforms today, including the Juppi Tank to create an incredible combination of discreet yet capable system. The Juppi Box Mod implements a recessed 510 connection structure, creating a comfortable to hold yet visually striking designs that allows atomizer to sit neatly onto the chassis. The Juppi Box Mod fires up to 75 watts and requires (1) high amp 18650 battery (sold separately). The Kanger Juppi Box Mod supports Nickel, Titanium, Stainless Steel 316 and Ni-Chrome wire in temperature control mode. The Kanger Juppi tank utilizes unique Juppi 0.2ohm atomizer heads which features a unique coil structure design. The coil structure design is very similar to the NotchCoil and is rewickable as well with the included cotton.


Specifications:
1).Battery: 1 x High Amp 18650 Battery(not included)
2).TC Supports : Nickel / Titanium /SS316L / Ni-Chrome
3).TC Range: 100 - 300C / 200 - 600F
4).Wattage Output: 7-75W
5).Resistance Range: 0.1 - 2.5ohm
6).Tank Diameter: 22mm
7).Tank capacity: 3mL
8).Coil: 0.2ohm NiCr


Buy Kanger JUPPI 75W Starter Kit in $14.99

[vaporl]

[Weekly Flash Sale]$24.9 for Joyetech EKEE Starter Kit
Joyetech EKEE Starter Kit $24.9

Joyetech Ekee Kit with Procore Motor, which design idea comes from BMW key, is the first choice cool kit for you. The Joyetech Ekee Kit is consist of the Joyetech Ekee 80W mod and the Joyetech ProCore Motor tank. The Joyetech Ekee mod can reach 80W max power, and feature 2A quick charge, real time lock, preheat and the new nicotine intake calculation. The Joyetech ProCore Motor tank features the innovative flip type top-fill system and detachable design.


Parameters:
Size: 27.0mm (W)*47.5mm (L)*117.5mm (H)
E-liquid capacity: 2ml (can be changed to 4.5ml with the spare glass tube)
Battery capacity: 2000mah
Display: 1.3 inch TFT color screen
Output range: 1-80W
Output modes: Power/Bypass/Temp(Ni,Ti,SS)/TCR(M1,M2,M3)
Resistance range: 0.05-1.5ohm for TEMP/TCR mode
Depth of 510 pins applicable: 4.0-5.5mm
0.1-3.5ohm for Power/ Bypass mode
Temperature Control:100-315°C/200-600°F


Click to buy Joyetech EKEE Starter Kit in $24.9


IJOY Elite PS2170 100W Starter Kit $29.9

IJOY Elite PS2170 100W Kit consists of the Elite PS2170 100W Box Mod and the Captain Mini Subohm Tank. The IJOY Elite PS2170 can compatible with the single 20700, 21700 and 18650 battery. With the personalized big size fire button, 0.96 LED screen and the compact size, it is easy to operate with NI, TI, SS, TC mode. With the unique Captain Mini Subohm Tank, it will bring you the cloud vapor and best taste. No leaking problem.


Features:
100W maximum output
Sliding top fill
Thread-Less Coil Head Design
Delrin wide-bore drip tip
Big size fire button
Unique Groove Chassis - Reduce Heat Transmission
No overhang with 26 mm tanks
Personalized design with a unique experience
TCR function
Unique Custom User Mode
USB port charging support
Firmware Upgradeable


Order IJOY Elite PS2170 100W Starter Kit in $29.9


SMOK G-priv 2 Box Mod $39.9

G-PRIV2 is an advanced version of G-PRIV, a new touch-screen kit from Smok. Compared with G-PRIV, it has a slimmer body and upgraded user interface, with which you can get comfortable hand-feel and a clearer screen with higher definition. simple and streamlined body of G-Priv 2 is ergonomically designed, which can give you comfortable hand feel. Powered by dual 18650 batteries, G-Priv 2 can reach up to 230W. Innovation keeps changing the vaping experience!


Specifications:
Size: 85 x 52 x 27.3mm
Power Range: 1W-230W
Voltage Range: 0.5V-9.0V
Resistance Range: 0.1Ω-2.5Ω (VW) / 0.05Ω-2Ω (TC)
Temperature Range: 200℉--600℉/100℃--315℃
Material: Zinc alloy
Battery: Dual 18650 batteries (not included)


Click to see more detail about SMOK G-PRIV 2 Box Mod in $39.9

[vaporl]

[SMOK Vape Deals]SMOK Stick Prince Baby Kit $19.9
SMOK Stick Prince Baby Kit $19.9

The SMOK Stick Prince Baby Starter Kit takes the renowned SMOK Stick series and combines it with the SMOK TFV12 Baby Prince Sub-Ohm Tank. The SMOK Stick Prince Baby features a 2000 mAh integrated battery with smart mechanical style output (output dependent on current state of battery) and intelligent LED light indicator that indicates battery life. The LED light will flash 4x each time the user takes a puff and 15x when the voltage of the device is below 3.3V. The SMOK Stick Prince Baby retains the newly designed hexagonal power button and carefully carved battery base, making it more exquisite than the other Stick series devices. Included with the SMOK Stick Prince Baby is the SMOK TFV12 Prince Baby Sub-Ohm Tank, the most capable Sub-Ohm Tank ever released. The chassis design of the TFV12 Prince Baby features multiple diameters, measuring 23mm at the base and 26mm at the widest point. The new press to open Top Fill System that isn't featured from the previous editions is fully implemented into the TFV12 Prince Baby, with a single fill port and a maximum tank capacity of 4.5 milliliters of E-Liquid. Airflow for the TFV12 Prince Baby is configured around the base of the chassis, providing ample airflow even for the maximal range of the atomizer. Included is a V8 Baby M2 0.25 ohm coils, designed specifically for the mechanical style output of the Stick Prince Baby, and the V8 Baby Mesh 0.15 ohm coil, designed for a fast heating process and massive vapor. The SMOK Stick Prince Baby and TFV12 Prince Baby Starter Kit is a powerful combination that is bound to be a legend.


Specs:
Mod 22mm x 83mm
Mod Battery: 2000mAh
Tank 26mm x 53mm
Tank Capacity: 4.5mL
Thread:510
Ultra-Portable Ergonomic Design
Pentagonal Front Fire Key
Stainless Steel Construction
Lock-N-Fill Top-Filling
Compatible With Smok's V8 Baby Coil Family


Buy SMOK Stick Prince Baby Kit in $19.9


SMOK V-Fin 160W TC Kit $39.9

SMOK V-Fin 160W TC Kit consists of the built-in 8000mAh V-Fin Box Mod and the SMOK TFV12 Big Baby Prince Tank, which is so powerful and durable to let you enjoy long-time vaping. With the 8000mAh super large capacity, its max output power can up to 160W and greatly to support the Temp Mode, Watt Mode and Memory Mode. The TFV12 Big Baby Prince has the easy top refilling system and bottom 2 larger adjustable air slot that is easy to meet your flavor. Working with the different v8 baby core, it will deliver different vapor. Besides, features the ergonomically big fire key, high-definition OLED screen and portable size, which will be your best vape partner wherever you go.


Features:
Modern design with an inlaid pattern
Powerful and durable built-in 8000mAh battery
160W output power with temp/watt/memory mode
Portable size
Big fire key
Easy-to-read OLED screen
Battery life indicator
Support USB charging and upgrading
Multiple protections
TFV8 baby beast new coils
Adjustable bottom airflow system
Top refill system


Order SMOK V-Fin 160W TC Kit in $39.9


SMOK TFV8 Big Baby Tank $11.9

The SMOK TFV8 Big Baby Beast Sub-Ohm Tank combines the best elements of two of the most popular and critically acclaimed tanks today, packing in the manageable size and affordable performance coil family from the Baby Beast with the capacity and range of the full sized TFV8. Maintaining the same 24.5mm diameter profile of the TFV8 and measuring just 3mm taller in height than the Baby Beast, the Big Baby Beast packs in a rangy 5 milliliter tank capacity accessed and filled via SMOK's signature Hinge and Lock Top Fill System. The Baby Beast Coil Family is based off of the high performance V8 line, retaining much of the same performance profile despite the diminutive size. Included with each kit is a trio of coil heads, featuring the V8 Baby X4 Coil Head, V8 Baby T6, and the V8 Baby RBA Head. Airflow is expanded, increasing each airslot to measure 15mm by 2mm which are located around the base of the chassis, with a full 8mm bore from chimney to drip tip.


Features:
SMOK TFV8 BIG BABY clearomizer
Top filling system
Dual adjustable air slots on the bottom
Tank capacity: 5ml
Stainless steel and glass construction
510 thread connection
24.5mm diameter


Check out SMOK TFV8 Big Baby Tank in $11.9

[vaporl]

Top 3 Sub Ohm Tanks for XOMO EXO Armor 300W TC Mod
XOMO EXO Armor 300W Box Mod

Collaborating with Sxmini and using SX550J chipset combine with UI interface designed by xomo. XOMO EXO Amor Box Mod has a through look at wattage, temperature, voltage, coil resistance, coil material, battery life, and so on. With 9 pieces pf armor- zinc alloy in classic matte black with fingerprint-resistance and UV protective surface treatment. Using NdFeB magnet, every piece of armor is polished inside and out with individual magnet attached, quick and easy to put armor on and off, gives you a meshanical feel all day. Made of high quality zinc alloy surround display screen reviews the name EXO-Armor which is laser carved，and the 16 small rings all around golden ring comes with a small surprise. When you place the mod in the dark, those dots light up in green, your mod will not be lost in the dark ever again.High end PC panel case in transparent black, finger print resistance, anti-scrath with hard anodizing. 14 little stars on each side of the mod. Dual battery to reach 300W.


FreeMax Mesh Pro Sub Ohm Tank Atomizer

The FreeMax Mesh Pro Tank is a 25mm diameter sub-ohm tank which features dual and triple mesh coils. Constructed by stainless steel and pyrex glass, it has a juice capacity of a decent 4ml (5mL for optional e-Juice capacity) and is conveniently refilled by removal of the top cap. Airflow can be set at the bottom and occurs via two adjustable air slots that can even be set to all the way closed. Knurling can be found throughout this device making adjustments of the airflow a breeze. What's the important, the Mesh Pro Tank works with dual and triple mesh coils that really bring out flavor thanks to a larger coil contact surface area. This design allows more even vaporization of juices and absorbs e-liquid more easily. 5 colors are available.


Feature:
1. Optional 5ml/6ml Juice Capacity
2. Innovative Mesh Pro Coil System
3. Convenient Slide Top Refill Design
4. Adjustable Bottom Airflow Control
5. 18mm Wide Bore 810 Drip Tip


Shop FreeMax Mesh Pro Sub Ohm Tank Atomizer NOw!
Order Freemax Mesh Pro Replacement Mesh Coils Now!


Horizon Falcon Tank Resin Edition

Horizon Falcon Sub Ohm Tank Resin Edition is an innovative and beautifully designed sub ohm tank from Horizon, which provides high performance and a classy feel. With the convenient top filling and adjustable bottom airflow system, it update the normal edition with 7ml capacity glass tube (included 5ml tube in package), also remains the supporting of both standard coils and mesh coils, the Horizon Falcon tank Resin Edition with 4 different e-liquid guiding elements will bring the constant peak flavor like never before. 7 colors for option.


Feature:
Liquid capcity: 7ml
colorful bubble glass
Top filling system
Bottom airflow control system
Both standard coil and mesh coil
510 threading connection
25.2mm overall diameter


Click to shop Horizon Falcon Tank Resin Edition


Smok TFV12 Prince Tank

TFV12 Prince Tank, the baby of the super powerful cloud beast king, is not only a powerful one but also an all-around sub ohm tank for daily use. This kit includes three newest & carefully modulated coils: the Prince Q4, X6 and T10, all of which have huge cloud and extremely dense flavor.It also has the newly designed crown-style body and colorful Cobra resin drip tip. Besides, it uses convex glass tube, which effectively enlarged the capacity to 8ml! Start your vaping with TFV12 Prince tank, you will find out the innovation just keeps changing the vaping experience!


Features and Specs:
Capacity: 8 ml
Height: 63mm
Diameter: 28mm
Material: Stainless Steel
Thread: 510
TFV12 Prince Q4 Coil(Pre-installed): Brings you deep and rich vapor, 0.4Ohm Quadruple coils, 40W-100W/Best Wattage: 60W-80W
TFV12 Prince X6(Kit Includes): Brings you silky taste and massive vapor, 0.15Ohm Sextuple Coils, 50W-120W/ Best Wattage: 80W-100W
TFV12 Prince T10(Kit Includes): Brings you massive vapor and rich flavors, 0.12Ohm Decuple Coils, 60W-120W/ Best Wattage: 80W-110W
TFV12 Prince M4(Optional): Applicable to mechanical mod, brings you silky and rich cloud taste, 0.17Ohm Quadruple coils, 30W-70W/ Best Wattage: 45W-55W
TFV12 Prince RBA(Optional) Brings you smooth airflow 0.25Ohm Dual Coils


Click to buy SMOK TFV12 Prince Tank

[vaporl]

[VAPORL]Mid Year Vape Deal 2018- 10% off MID10
Hi vapors! Here bring a good news to you all, Vaporl hold a great Mid-Year Vape promotion now, you can save 10% off sitewide using coupon code "MID10". Moreover, we also pick 10 high-value giveaway with popularity. There must have been one you like! Click to see more make you have the best vapor in Vaporl.com



Coupon Code: MID10 (Also available in PROMOTION ITEMS)
Promotion Date: 2018.08.06 - 2018.08.25 (UTC)


Giveaway Prizes:
Uwell Nunchaku Kit * 2
Wotofo Flux Kit * 2
Aleader Bhive Squonk Kit * 2
Freemax Mesh Pro Tank * 1
HQD Comma Kit * 1
Wotofo Warrior RDA * 2


Click to win a free Mid-Year Vape Gears in https://www.vaporl.com/blog/post/201...-mid-year-sale


P.S.: Other coupon code or discount cannot be applied at the same time
Any Problem, pls contact support@vaporl.com
Thank you for your support, wish you good luck !