-
Kauppias
YFTK In'Ax V5 DL RTA Clone $29.99
The YFTK In'Ax V5 DL RTA Clone is constructed from 316 Stainless Steel (body) and PC (tank tube) in 22mm Diameter. The RTA supports DL vaping experience and it comes with a 3ml e-juice capacity tank tube and adjustable air-hole that meet your individual vapor need.
Original ThinkVape ZETA AIO 60W VW Box Mod Pod System Vape Starter Kit original price$59.90, now only$38.99
The ThinkVape ZETA Pod Kit is powered by single 18650 batteries (No included), it delivers a maximum output of 60W, along with three modes available to choose, including Power / Bypass / NI / SS. The ThinkVape ZETA replacement pod Cartridge is constructed from Food Grade PCTG material. The pod cartridge of ZETA Pod Kit comes with 3ml e-liquid capacity and multiple coils for your different demand. And it also supports RBA coil for DIY lovers. (RBA Coil not included)
Original ATVS Sirius 30W 1000mAh VW Box Mod Pod System Vape Starter Kit $24.99
The ATVS Sirius Box Mod Kit is a variable wattage box mod kit, it is powered by 1000mAh rechargeable battery with output wattage range from 5W to 30W. The Mod Kit is constructed from Acrylic and Aluminum Alloy. ATVS Sirius comes with two types of coil: 0.6ohm mesh coil and 1.0ohm regular coil and a 2.0ml refillable pod cartridge that can meet your all day long vaping experience.
Steam Tuners Replacement Bell Cap Clone for Dvarw MTL RTA Vape Atomizer $4.99
The Steam Tuners Replacement Bell Cap Clone is made from PMMA, which is compatible with Steam Tuners Dvarw MTL RTA Vape Atomizer Clone. The cap is 22mm diameter. The bell cap has a 3.5ml juice capacity.
Firebird Replacement 510 Drip Tip for RDA / RTA / RDTA / Sub-Ohm Tank Vape Atomizer $3.99
The Firebird 510 Replacement Drip Tip is made of Stainless Steel and POM and it is suitable for all atomizers that fit 510 drip tip, such as OBS Engine 2 RTA, GeekVape Ammit MTL RTA, Phevanda Bell MTL RDA, Gas Mods G.R.1 GR1 Pro RDA, Vapefly Galaxies MTL Squonk RDTA, Vandy Vape Berserker MTL RDA, Ubertoot MTL RTA.
Original Reewape RW-AS283 Replacement 510 Drip Tip for RDA / RTA / RDTA / Sub-Ohm Tank Vape Atomizer $1.99
The Reewape RW-AS283 Replacement 510 Drip Tip is made of resin and it is suitable for all atomizers that fit 510 drip tip, such as OBS Engine 2 RTA, GeekVape Ammit MTL RTA, Phevanda Bell MTL RDA, Gas Mods G.R.1 GR1 Pro RDA, Vapefly Galaxies MTL Squonk RDTA, Vandy Vape Berserker MTL RDA, Ubertoot MTL RTA.
Original Reewape RW-AS284 Replacement 510 Drip Tip for RDA / RTA / RDTA / Sub-Ohm Tank Vape Atomizer $1.99
The Reewape RW-AS284 Replacement 510 Drip Tip is made of resin and it is suitable for all atomizers that fit 510 drip tip, such as OBS Engine 2 RTA, GeekVape Ammit MTL RTA, Phevanda Bell MTL RDA, Gas Mods G.R.1 GR1 Pro RDA, Vapefly Galaxies MTL Squonk RDTA, Vandy Vape Berserker MTL RDA, Ubertoot MTL RTA.
Original Reewape RW-AS286 Replacement 510 Drip Tip for RDA / RTA / RDTA / Sub-Ohm Tank Vape Atomizer $1.99
The Reewape RW-AS286 Replacement 510 Drip Tip is made of resin and it is suitable for all atomizers that fit 510 drip tip, such as OBS Engine 2 RTA, GeekVape Ammit MTL RTA, Phevanda Bell MTL RDA, Gas Mods G.R.1 GR1 Pro RDA, Vapefly Galaxies MTL Squonk RDTA, Vandy Vape Berserker MTL RDA, Ubertoot MTL RTA.
Original Reewape RW-AS285 Replacement 510 MTL Drip Tip for RDA / RTA / RDTA / Sub-Ohm Tank Vape Atomizer $1.99
The Reewape RW-AS285 Replacement 510 MTL Drip Tip is made of resin and it is suitable for all atomizers that fit 510 drip tip, such as OBS Engine 2 RTA, GeekVape Ammit MTL RTA, Phevanda Bell MTL RDA, Gas Mods G.R.1 GR1 Pro RDA, Vapefly Galaxies MTL Squonk RDTA, Vandy Vape Berserker MTL RDA, Ubertoot MTL RTA.
YFTK Replacement Diamond Top Cap Tank Tube + Chimney for Flash e-Vapor V4 / V4.5 RTA Vape Atomizer Clone $5.99
The YFTK replacement PC Diamond Top Cap Tank Tube and 316 Stainless Steel Chimney is suitable for Flash e-Vapor V4 / V4.5 RTA Vape Atomizer Clone. It comes with 5ml juice capacity.
Original Reewape 510 Thread Adapter for SMOKTech SMOK RPM40 Pod System Vape Kit $3.99
The Reewape 510 Thread Adapter is designed for SMOK RPM40 Pod System Vape Kit, it can switch your SMOK RPM40 Pod Mod to a normal Pod Mod which can be fitted to any 510 thread atomizer that provide more choice for you. The 510 thread adapter includes: outer black part is made of Aluminum Alloy Plating, middle part (thread) is made of Stainless Steel.
Original Reewape 510 Thread Adapter for SMOKTech SMOK RPM40 Pod System Vape Kit $3.99
The Reewape 510 Thread Adapter is designed for SMOK RPM40 Pod System Vape Kit, it can switch your SMOK RPM40 Pod Mod to a normal Pod Mod which can be fitted to any 510 thread atomizer that provide more choice for you. The 510 thread adapter includes: outer housing part is made of Aluminum Alloy, middle part (510 threading connection) is made of Stainless Steel.
Original Reewape 510 Thread Adapter for Voopoo VINCI / VINCI R / VINCI X Pod System Vape Kit $3.99
The Reewape 510 Thread Adapter is designed for Voopoo VINCI / VINCI R / VINCI X Pod System Vape Kit, it can switch your Voopoo VINCI Pod Mod to a normal Pod Mod which can be fitted to any 510 thread atomizer that provide more choice for you.
3FVAPE - Ultimate Mod & Atomizer Store - World Wide Free Shipping
-
Kauppias
Original Hugo Vapor URUS 100W TC VW Box Vape Mod $31.99
The Hugo Vapor URUS Mod can be compatible with 18650, 20700, 21700 batteries (Not included) and the maximum output can reach 100W. It utilizes Nylonfibre frame, which makes the mod very light-weight for easy carry. The atomizer resistance supported is from 0.06 to 3ohm. With multiple working modes, including VW, Bypass, TC (Ni, Ti, SS), VTC and Preheat, URUS Mod will bring you a lot of fun on vaping.
Original Hugo Vapor Rader ECO 200W VW Box Vape Mod $28.99
The Hugo Vapor Rader Eco Mod, powered by dual 18650 batteries (Not included) with 200W max output, is the newly designed box mod from Hugo Vapor. The Rader Eco supports Variable Voltage, Variable Wattage, Bypass and Curve Heating output Mode. Equipped with the 0.96inch OLED screen, the Hugo Vapor Rader Eco Mod will bring you great vaping experience.
Original Hugo Vapor Conqueror 2200mAh TC Herb Vaporizer Vape Starter Kit $24.99
The Original Hugo Vapor Conqueror Kit is a herb vaporizer kit used for dry herb and other dry things for vapor. With a 2200mAh built-in battery, it has a large battery capacity and the battery can be recharge with the micro USB charger easily. The Hugo Vapor Conqueror Kit features light weight and attractive appearance, it is easy and portable to carry with you.
Original Hugo Vapor Submarine 850mAh TC Pod System Vaporizer Vape Starter Kit $14.99
The Hugo Vapor Submarine Kit, with an 850mAh built-in battery, is a Pod System with the one button operation, it features a full LED with temperature control, battery life indicator, and an all-ceramic heating chamber. There are 3 shift temperature control: 200'C, 220'C, 240'C. 10 small openings to limit the heating of the battery and a central LED indicating the remaining level of autonomy. Designed for use in MTL (Mouth-to-lung), the Submarine Pod System will work with pods containing 0.7ohm coils. Once switched on, there is no need for the switch, the system only turns on during inhalation. With the small size, the Hugo Vapor Submarine Pod System Kit is compact on your hand.
Original Vapelustion Hannya Nano 600mAh Pod System Vape Starter Kit with 2 Paired Pannels original price$36.99, now only$27.99
The Vapelustion Hannya Nano Pod System Vape Starter Kit comes with a traditional classic body, which means the possibility of infinite change. Hannya Nano is constructed from Plastic and Metal material, it is powered by 600mAh Built-in Battery and comes with a 2ml e-juice capacity refillable pod cartridge and 1.2ohm resistance coil. It continues the unremitting spirit of hannya mod black and white nano that comes with different themes metal panel, each of which is accompanied by a lanyard with the same theme.
3FVAPE - Ultimate Mod & Atomizer Store - World Wide Free Shipping
-
Kauppias
Original Gas Mods G.R.1 GR1 S RDA with BF Pin original price$24.99, now only$13.99
The Gas Mods G.R.1 GR1 S RDA is constructed from Stainless Steel and POM in 22mm Diameter. The G.R.1 S has air-holes that support middle airflow adjustable, it can meet your different vapor cloud needs.
Original Gas Mods Kree RTA with A Spare PC Tank Tube original price$29.99, now only$20.99
The Gas Mods Kree RTA is constructed from Stainless Steel and Glass in 22mm Diameter. The RTA (2.5mm airflow inside) comes with a dual terminal build deck that is easy building and a 3.5ml e-juice capacity tube. Furthermore, the RTA comes with 5 airflow inserts (Inner Diameer: 2.0mm, 1.5mm, 1.2mm, 1.0mm, 0.8mm) and a 510 adapter. Kree RTA supports middle airflow adjustable control.
Original Wismec R80 80W VW Mod Pod System Vape Starter Kit $28.99
The Wismec R80 VW Mod Pod System Vape Kit is a portable and multifunctional device that can be used as both a Pod Mod kit or a regular Mod kit. With the help of an atomizer adapter (Not included), R80 is compatible with regular tanks. Inspired by the Reuleaux triangle, the unique shape of R80 brings you a quite comfortable hand feeling. It is mini that the R80 kit can be taken anywhere. R80 pod kit is powered by a replaceable 18650 cell structure innovatively (Not included), offering you a 80W high power output and longer-lasting. And the Wismec R80 adopts USB-C port this time, making charging faster than ever. What's more, there is no need to worry about the direction when you insert the USB-C cable. Another major attraction of the R80 pod vape kit is its humanized battery cover open way. By rotating the buckle, you can replace the 18650 battery quickly and easily. You can also unscrew the battery cover with a coin. Besides, the Cover cap on the top of the machine effectively prevents leakage and dust. And the ergonomic design mouthpiece could perfectly fit your mouth and offer a better user experience. It is worth mentioning that, for the first time, Wismec applied a 0.96-inch TFT screen to the pod mod. The changeable display colors make it outstanding. The Wismec R80 Pod cartridge has a large capacity of 4ml, which can store a large amount of e-juice for long-term vaping. The whole cartridge is transparent and visible, vapers can notice the e-liquid remaining level whenever and wherever. R80 comes with KTR Mesh 0.3ohm coil and NiCr 0.8ohm coil, bringing vapers huge vapor cloud and optimal flavor. R80 will be your priority whatever in appearance or function.
Original Smoant Charon Baby 750mAh Pod System Vape Starter Kit original price$36.99, now only$18.99
The Smoant Charon Baby Pod System Vape Kit with innovative CPR technology, featuring a colorful and durable stunning finish and will leave no fingerprinter on it. Powered by 750mAh built-in battery, Charon baby is charged by the lanyard USB type-C cable and it has three colors LED lights to indicate the battery status and comes with two types of coil: 0.6ohm Mesh Coil (15W) and 1.2ohm Ni80 Coil (10W) and a 2.0ml e-juice capacity pod cartridge with side refilling system to meet your different vaping needs. What's more, Charon Baby is compatible with Battlestar baby coils and cartridges.
Original Reewape AS287SS Replacement 510 Drip Tip for RDA / RTA / RDTA / Sub-Ohm Tank Vape Atomizer $1.99
The Reewape AS287SS Replacement 510 Drip Tip is made of resin and it is suitable for all atomizers that fit 510 drip tip, such as OBS Engine 2 RTA, GeekVape Ammit MTL RTA, Phevanda Bell MTL RDA, Gas Mods G.R.1 GR1 Pro RDA, Vapefly Galaxies MTL Squonk RDTA, Vandy Vape Berserker MTL RDA, Ubertoot MTL RTA.
Original Reewape AS289 Replacement 810 Drip Tip for 528 Goon / Reload / Kennedy /Wotofo Profile/Battle RDA $1.99
The Reewape AS289 Replacement 810 drip tip is made of resin. It is suitable for Goon RDA, Goon 25mm RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA, Vandy Vape Pulse V2 RDA, Vandy Vape Pulse X RDA, Vandy Vape Kylin V2 RTA, Hellvape Drop Dead RDA, Wotofo Profile RDA, Wotofo Serpent Elevate RTA, Digiflavor Drop Solo RDA, Geekvape Loop V1.5 RDA, THC Tauren Honeycomb RTA.
3FVAPE - Ultimate Mod & Atomizer Store - World Wide Free Shipping
-
Kauppias
Original Asmodus Lustro 200W Touch Screen TC VW Vape Box Mod original price$79.95, now only$38.99
The original Asmodus Lustro Box Mod is a versatile regulated mod powered by dual 18650 batteries (not included), which can reach maximum output to 200W. With a capacitive touch screen, the operation on Lustro is very easy to vapers. Working with the latest GX-200-HUT chipset, Lustro Box Mod provides high performance in all aspects. The Curve output mode allows for detailed customization of the firing curve. The Lustro Box Mod will bring you the most comfortable vaping experience.
Original Artery PAL SE 20W 700mAh MTL Pod System Vape Starter Kit $26.99
The Artery PAL SE MTL Pod System Vape Starter Kit, an elaborately designed MTL Pod kit, it is constructed from Zinc Alloy and PCTG material and features the seagrass fiber cotton purify technology pod which can restore into 99% original flavor of the e-juice and it is more healthy. PAL SE is powered by 700mAh built-in battery with 20W Max Output Power and comes with 2ml e-juice capacity pod cartridge to ensure the long-lasting vaping and it can be fully charged by convenient Type-C port within 40 mins. With the LED indicator, you can know the battery level in vaping or charging easily. Furthermore, there are multiple protections that ensure your vaping safety.
Replacement Neutral Silicone Ring with Lanyard Connector for E-Cigarette / Pod Kit / Vape Mod Kit - 8mm Diameter (10 PCS) $1.59
The Neutral Silicone Ring with Lanyard Connector is made of Silicone material, it is suitable for most of E-Cigarette / Pod Vape Kit / Vape Mod Kit in 8mm Diameter. It needs to be used by connecting with Neutral Lanyard.(Lanyard is not included). 10 PCS / Pack.
Replacement Neutral Silicone Ring with Lanyard Connector for E-Cigarette / Pod Kit /Vape Mod Kit - 13mm Diameter (10 PCS) $1.69
The Neutral Silicone Ring with Lanyard Connector is made of Silicone material, it is suitable for most of E-Cigarette / Pod Vape Kit / Vape Mod Kit in 13mm Diameter. It needs to be used by connecting with Neutral Lanyard.(Lanyard is not included). 10 PCS / Pack.
Replacement Neutral Silicone Ring with Lanyard Connector for E-Cigarette / Pod Kit /Vape Mod Kit - 20mm Diameter (10 PCS) $1.79
The Neutral Silicone Ring with Lanyard Connector is made of Silicone material, it is suitable for most of E-Cigarette / Pod Vape Kit / Vape Mod Kit in 20mm Diameter. It needs to be used by connecting with Neutral Lanyard.(Lanyard is not included). 10 PCS / Pack.
Replacement Neutral Lanyard with Connector for E-Cigarette / Pod Vape Kit / Vape Mod Kit $1.29
The Neutral Lanyard with Connector is made of Bamboo Fiber material, it is suitable for most of E-Cigarette / Pod Vape Kit / Vape Mod Kit. It is compatible with Neutral Silicone Ring.(Neutral Silicone Ring is not included). The Lanyard with "cell phone loop" so that it also can be attached to the USB stick, vape device, whistles, keys, ID badge, or phone. The lanyard can be worn around the neck.The stick is then firmly attached to the lanyard. It can be removed and clipped on as often as you like.
Replacement Disposable Silicone Taste Cap for Juul / Puff / Hide Pod Vape Kit(10 PCS) $1.19
The Replacement Disposable Silicone Taste Cap is suitable for Juul Pod Vape Kit / Puff Pod Vape Kit / Hide Pod Vape Kit as a replacement part, it is made of silicone material. 10 PCS / Pack.
Replacement Disposable 510 Drip Tip for RDA / RTA / RDTA / Clearomizer / Sub Ohm Tank(10 PCS) $1.19
The Disposable Replacement 510 Drip Tip is made of Silicone. It is suitable for RDA / RTA / RDTA / Clearomizer Vape Atomizer and can fit most atomizers or cartomizers with 510 connectors. 10 PCS / Pack.
Replacement Disposable 810 Drip Tip for 528 Goon / Reload / Kennedy / Wotofo Profile / Battle RDA(10 PCS) $1.19
The Disposable 810 Drip Tip is made of silicone. It is suitable for Goon RDA, Goon 25mm RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA, Vandy Vape Pulse V2 RDA, Vandy Vape Pulse X RDA, Vandy Vape Kylin V2 RTA, Hellvape Drop Dead RDA, Wotofo Profile RDA, Wotofo Serpent Elevate RTA, Digiflavor Drop Solo RDA, Geekvape Loop V1.5 RDA, THC Tauren Honeycomb RTA. 10 PCS / Pack.
3FVAPE - Ultimate Mod & Atomizer Store - World Wide Free Shipping
-
Kauppias
Replacement Disposable Silicone Taste Cap for Uwell Caliburn / Caliburn KOKO Pod Vape Kit(10 PCS) $1.39
The Replacement Disposable Silicone Taste Cap is suitable for Uwell Caliburn Pod Vape Kit / Caliburn KOKO Pod Vape Kit as a replacement part, it is made of silicone material. 10 PCS / Pack.
Replacement Disposable Silicone Taste Cap with 9.2mm Inside Diameter for Pod Vape Kit /Vape Mod Kit with 510 Tip(10 PCS) $1.19
The Replacement Disposable Silicone Taste Cap with 9.2mm Inside Diameter is suitable for most of Pod Vape Kit / Vape Mod Kit with 510 Tip as a replacement part, it is made of silicone material. 10 PCS / Pack.
Replacement Disposable Silicone Taste Cap for Relx Alpha / Voopoo VINCI / VINCI X / SMOK RPM 40 Pod Vape Kit(10 PCS) $1.19
The Replacement Disposable Silicone Taste Cap is suitable for Relx Alpha Pod Vape Kit / Voopoo VINCI Pod Vape Kit / VINCI X Pod Vape Kit / SMOK RPM 40 Pod Vape Kit as a replacement part, it is made of silicone material. 10 PCS / Pack.
Replacement Silicone Dust Cap for Relx Alpha / Caliburn Flat Rod-Shaped Pod System Vape Kit $1.09
The Replacement Silicone Dust Cap is suitable for Relx Alpha / Caliburn Flat Rod-Shaped Pod Vape Kit as a replacement part, it is made of silicone material.
Original Artery PAL SE MTL Pod Vape Kit Replacement Cartridge with 1.4ohm Coil(3 PCS) (Standard Version) original price$12.90, now only$7.99
The PAL SE Pod Cartridge is designed for Artery PAL SE MTL Pod System Vape Starter Kit as a replacement part, it comes with 2ml e-juice capacity and 1.4ohm resistance coil. Adopting the sea grass fiber cotton and purify technology, it will provide 99% original flavor and is more healthier. 3 PCS / Pack.
Original Artery PAL SE MTL Pod Vape Kit Replacement Cartridge with 1.0ohm Coil(3 PCS) (Standard Version) original price$12.90, now only$7.99
The PAL SE Pod Cartridge is designed for Artery PAL SE MTL Pod System Vape Starter Kit as a replacement part, it comes with 2ml e-juice capacity and 1.0ohm resistance coil. Adopting the sea grass fiber cotton and purify technology, it will provide 99% original flavor and is more healthier. 3 PCS / Pack.
Hussar RTA V1.5 Tank Vape Atomizer Clone Replacement Top Cap Tank Tube + Drip Tip $3.99
The Replacement Top Cap Tank Tube and Drip Tip are designed for Hussar Style RTA V1.5 Tank Vape Atomizer as a replacement part. They are made of PC material. The top cap tank tube is 22.5mm height and 22mm diameter, the drip tip is 14mm height and 9.5mm outer diameter.
Original Yachtvape Replacement RBA Deck Coil Head with 510 Connector Adapter for GeekVape Aegis Boost Pod Vape Kit $5.99
The Yachtvape RBA Deck Coil Head is specially designed for DIY lovers, it comes with two-post build deck and single coil building design. It is perfectly compatible with the Geekvape Aegis Boost Mod Pod System Vape Kit.
Original OMEKA 510 Thread Adapter with Spring-Loaded Center Pin for SMOK RPM 40W Pod Vape Kit $3.99
The OMEKA 510 Thread Adapter is designed for SMOK RPM Pod System Vape Kit, it can switch your SMOK RPM Pod Mod to a normal 40W Pod Mod which can be fitted to any 510 thread atomizer that provide more choice for you. The OMEKA 510 Thread Adapter is made of POM (Outer Housing) and Brass & Gold Plating (510 Threading Connector). As for this 510 threading connector, it comes with a special Spring-Loaded 510 Center Pin design that can be fitted for 510 drip tip with different lengths.
3FVAPE - Ultimate Mod & Atomizer Store - World Wide Free Shipping
-
Kauppias
-
Kauppias
-
Kauppias
Original Chill C-Pod 550mAh Pod System Vape Kit with Bluetooth & Camera Control $21.99
The Chill C-Pod System Vape Kit is constructed from Aluminum Alloy + Stainless Steel material, which is powered by 550mAh built-in battery and comes with a 1.4ohm resistance coil that can meet your all day long vaping experience. It is worthy that C-Pod is quipped with Bluetooth and camera control function that can connect your phone device to take a photo or record a video.
Original Oukitel Hero 13W 850mAh AIO Pod System Vape Starter Kit $22.99
The Oukitel Hero AIO Pod System Vape Kit has elegant appearance and ultrathin body. It is powered by 850mAh built-in battery. With air switch and fire button design, you can direct vape by inhaling or press the button, two ways to start vaping. Oukitel Hero comes with a pod cartridge of 2ml capacity and 1.2ohm cotton dual core to deliver the true flavor of liquid in double, and it support regular liquid or nicotine salt. What's more, it features motor vibration reminder function for easy operation, this pod vape kit is perfect suit for beginners.
Original IJOY Jupiter 70W VW Box Mod Pod System Vape Starter Kit original price$37.99, now only$30.99
The IJOY Jupiter Pod System Vape Starter Kit is constructed from Aluminium, Zinc Alloy and Leather with elegant and modern outlook, adopting the leading-edge UNIV chipset. Jupiter is powered by single 18650 battery (Not included) with max 70W power output, and supports one-day vaping. It has a pod cartridge of 5ml e-juice capacity with bottom refilling design. Also, it comes with two types of coil: J1 0.2ohm mesh coil and J2 0.6ohm mesh coil for massive clouds and optimal flavor. Equipped with a 0.96 inch TFT color screen, the JOY Jupiter will bring you great vaping!
Original Oukitel Hero Pod System Vape Kit Replacement Cartridge with 1.2ohm Cotton Dual-Core(3 PCS) $8.99
The Oukitel Replacement Cartridge is designed for Oukitel Hero Pod System Vape Kit, which comes with 2ml e-juice capacity and features 1.2ohm Cotton Dual-Core Coil. 3 PCS / Pack.
Original IJOY Jupiter Pod System Vape Kit Replacement Cartridge with 0.2ohm Mesh Coil $7.89
The IJOY Replacement Cartridge is designed for IJOY Jupiter Pod System Vape Kit, which comes with 5ml e-juice capacity and features 0.2ohm Mesh Coil.
Original IJOY Jupiter Pod System Vape Kit / Cartridge Replacement Mesh-J2 Coil Head(3 PCS) $6.29
The IJOY Replacement Mesh-J2 Coil Head is designed for IJOY Jupiter Pod System Vape Kit, which features 0.6ohm coil resistance and power range from 20W to 30W. 3 PCS / Pack.
Original IJOY Jupiter Pod System Vape Kit / Cartridge Replacement Mesh-J1 Coil Head(3 PCS) $6.29
The IJOY Replacement Mesh-J1 Coil Head is designed for IJOY Jupiter Pod System Vape Kit, which features 0.2ohm coil resistance and power range from 40W to 60W. 3 PCS / Pack.
Original IJOY Jupiter Pod System Vape Kit / Cartridge Replacement Mesh-RBA-J3 Coil Head with 510 Adapter $6.29
The IJOY Replacement Mesh-RBA-J3 Coil Head is designed for IJOY Jupiter Pod System Vape Kit, which is recommended to be use with 0.1~1.5ohm resistance. It comes with a 510 Adapter and fits for DIY vaping lovers.
Replacement Bump Anti Slip Silicone Band for E-Cigarette / Pod Kit / Vape Mod Kit - 19mm Diameter (5 PCS) $2.59
The Bump Anti Slip Band is made of Silicone material in 19mm diameter, it is suitable for most of E-Cigarette / Pod Vape Kit / Vape Mod Kit and designed for 19mm diameter glass tank, RBA or RTA, RDA and Tube Mod.. The vape band is a necessary accessory for any and ALL vapers, especially glass tank users. Not only does it keep your device stylish and looking awesome, they also serve a purpose. The bands can help protect glass tanks from breaking in case of a fall. They are also wonderful for when those darn threads just don't want to come loose. Pop a band on there and loosen it with ease. 5 PCS / Pack.
510 Thread Adapter Connector for Voopoo VINCI / VINCI R / VINCI X Pod System Vape Kit $3.99
The 510 Thread Adapter is designed for Voopoo VINCI / VINCI R / VINCI X Pod System Vape Kit, it can switch your Voopoo VINCI / VINCI R / VINCI X Pod Mod to a normal Pod Mod which can be fitted to any 510 thread atomizer that provide more choice for you. The 510 Thread Adapter is made of POM (Outer Housing) and Stainless Steel (510 Threading Connector).
3FVAPE - Ultimate Mod & Atomizer Store - World Wide Free Shipping
-
Kauppias
Original Timesvape Dreamer V1.5 Hybrid Mechanical Mech Vape Mod original price$74.99, now only$59.99
The Timesvape Dreamer V1.5 Mechanical Mod is constructed from copper material. Dreamer V1.5 is powered by 1 x 18650 / 20700 / 21700 Batteries (Not included). The tube itself is 27mm at its widest point, tapering to 25mm at the top. The tube is reversible, so you can customize the grip to suit your preferences. The copper contact pin is also silver-plated for a perfect connection every time. Which compare with dreamer mod, there are some improvements: 1. Add the pressure relief hole; 2. Use the constant button; 3. The 18650 adapter make improvements; 4. Add an insulator inside top more safe; For dreamer mod if use constant button also can work well.
Original UKERI Magik 50W 1500mAh VW Box Mod Pod System Vape Starter Kit(Standard Version) $27.99
The UKERI Magik VW Box Mod Pod System Vape Starter Kit is powered by built-in 1500mAh battery with a wider power range from 8W to 50W to ensure powerful and durable vaping for all day long, you can easily find your favorite taste with more power choices. As a beautiful beast, MAGIK produces huge vapor production, and you can bring it to a cloud vapor competition. Magik Kit comes with a pod cartridge of 5.5ml e-juice capacity. What's more, Magik Kit comes with two types of mesh coils: V1 0.3ohm Mesh Coil and S1 0.3ohm Mesh Coil. And the UKERI Magik Cartridge is compatible with Voopoo VINCI / VINCI R / VINCI X Mod. At the same time, the UKERI V1 / S1 Mesh Coils can be used for SMOK RPM40 Cartridge and Voopoo VINCI / VINCI R / VINCI X Cartridge. Upgraded material and design, both mesh coils are perfect for better flavor experience and huge vapor production. Transparent design to make every drop of e-liquid visible and side filling port makes it super easy to refill.
Original VOOPOO PnP 22 AIO 50W 2000mAh Pen Vape Starter Kit(Standard Version) $30.99
The VOOPOO PnP 22 AIO Vape Kit is a brand new PEN KIT devices. PnP 22 AIO Kit has a perfect mixture of the compact and delicate pole equipment with the advantages of PnP series atomization core, strong and vigorous. Furthermore, the function of intelligent identification of atomization core and automatic matching of power makes them the most reliable equippment for the players who pursue fashion and the new players. The PnP 22 AIO Kit is equipped with PnP-VM1 0.3ohm atomization core and also matches PnP atomization core. Everyone can find their own taste with it. On the other hand, PnP 20 AIO Kit is powered by 2000mAh lithium battery, large battery capacity, long lasting endurance and it supports 5V / 1A quick charge, and can be fully charged within 2 hours. PnP 22 AIO Kit comes with top refilling system that makes refill conveniently and fastly. There are five safety protections that can ensure your vaping safety.
Original UKERI Magik Pod System Vape Kit Replacement Cartridge w/o Coil(Standard Version) $3.99
The UKERI Replacement Cartridge is designed for UKERI Magik Pod System Vape Kit as a replacement part, which comes with 5.5ml e-juice capacity. It is compatible with UKERI Replacement V1 Mesh Coil / S1 Mesh Coil (Coils are not included).
Original UKERI Magik Pod System Vape Kit / Cartridge Replacement S1 Mesh Coil Head(5 PCS) $10.99
The UKERI Replacement S1 Mesh Coil Head is designed for UKERI Magik Pod System Vape Kit or Cartridge as a replacement part, which features 0.3ohm coil resistance and power range from 20W to 50W.
Original UKERI Magik Pod System Vape Kit / Cartridge Replacement V1 Mesh Coil Head(5 PCS) $10.99
The UKERI Replacement V1 Mesh Coil Head is designed for UKERI Magik Pod System Vape Kit or Cartridge as a replacement part, which features 0.3ohm coil resistance and power range from 25W to 50W.
Original Vivismoke Gentle Organic Cotton Threads for RBA / RDA / RTA / RDTA Vape Atomizer(20 PCS) $1.99
The Vivismoke Gentle Organic Cotton Threads are made of Pharma Grade 100% tasteless cotton wick and are suitable for RBA / RTA / RDA / RDTA Vape Atomizer as a replacement part. The Cotton Threads are suitable for Coils in 2.5~3.0mm Diameter.
Replacement Top Cap Tank Tube + Drip Tip for SXK HOLY Patibulum RTA Clone/ Vapeasy Patibulum MTL RTA Clone $3.99
The Replacement Top Cap Tank Tube + Drip Tip are made of PC material and they are suitable for SXK HOLY Patibulum RTA Vape Atomizer Clone/ Vapeasy Patibulum MTL RTA Vape Atomizer Clone as replacement parts.
3FVAPE - Ultimate Mod & Atomizer Store - World Wide Free Shipping
-
Kauppias
Original FreeMax GEMM DTL Disposable Sub Ohm Tank Vape Clearomizer(2 PCS) $6.99
The FreeMax GEMM DTL Disposable Sub Ohm Tank Vape Clearomizer comes with 0.5ohm DTL Mesh Coil that power range from 15W to 25W and 2ml e-juice capacity. 2 PCS / Pack.
Original FreeMax GEMM 25W 1300mAh MTL / DTL Box Mod Pod System Vape Starter Kit $20.99
The Freemax GEMM 25W Box Mod Pod System Vape Kit consists of Freemax GEMM 25W Box Mod and Freemax GEMM Replacement Tank, which is powered by 1300mAh built-in battery and the mod device provides clear picture of your battery life through four levels battery life indicator. The GEMM tank comes with 0.5ohm or 1.0ohm mesh coil, and 2ml e-juice capacity to satisfy your needs of DTL or MTL, freebase or nicotine salt e-juice vaping experience. Furthermore, GEMM 25W Box Kit features the latest FM CoilTech 3.1, and the pod is able to be refilled up to 20 times, much more than its kind with more stable flavor maintenance. It reveals every single taste from e-liquid of both nicotine salt and freebase with FM CoilTech 3.1. What's more, the military grade SS904L and exclusive Tea Fiber Cotton make it more stable and durable with impressive flavors as always. You will find it easy and smooth to adjust the airflow control to the line part. Just a light tap and then enjoy the amazing vaping experience!
Original Innokin Kroma R 80W DTL / MTL VW Mod Vape Starter Kit with Zlide Tank $45.99
The Innokin Kroma R Zlide Kit is a powerful and compact vape mod device that consists of an Innokin Kroma R VV VW Box Mod and an Innokin Zlide Tank. And it is also compatible with Innokin Ajax Tank (Not included). Compact, stylish and sleek, the Kroma-R is crafted with premium quality Zinc alloy material. Featuring an ergonomic design with a textured grip, the Kroma-R fits perfectly into your hand. Powered by single 18650 batteries (Not included), it has 80W high power, which can definitely satisfy the vapor chaser. Just push the lock to open the high-quality spring-loaded battery door and quickly replace the 18650 battery. The Kroma-R features 2A Micro-USB quick charge and integrated safety protections. In addition, the Kroma R Mod uses Innokin's proprietary chip with the most diverse features and all the most popular working modes. Enjoy great vaping with Wottoge (6~80W) and Voltage (1~7.5V) outputs and Soft, Normal and Boost Modes. On the full control panel, the Kroma-R top-quality fire button is satisfying to click and integrated into the bright OLED screen. All important information is clearly displayed on the screen including battery charge, wattage / voltage, coil resistance, puff count, voltage out and wattage lock. As for the Innokin Zlide Tank, it features 4ml / 2ml e-juice capacity and features a convenient retractable top-fill design that is secured by a dripper locking system. What' s more, the Kroma-R is great for big cloud DTL vaping with the Ajax tank or enjoy intense MTL flavors with the full line of Z-coils and Platform series tanks. Upgrade to a superior vape experience with the Innokin Kroma-R!
Original Reewape AS291 Replacement 810 Drip Tip for SMOK TFV8/TFV12 Tank/Kennedy/Battle RDA $1.99
The Reewape AS291 810 Replacement drip tip is made of Stainless Steel and Carbon Fiber, it is suitable for SMOK TFV8 Tank, TFV8 Big Baby Tank, TFV12 Tank, Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA.
Original Vivismoke Gentle Fused Clapton MTL Kanthal A1 Heating Wire(3 Meters) $3.99
The Vivismoke Gentle Fused Clapton Heating Resistance MTL Wire is perfect for RBA / RTA / RDA atomizers. The wire is made of Kanthal A1. It features 32GA x 3 + 40GA gauge and 5.21ohm resistance value per feet, which will be a good choice for DIY.
Original Vivismoke Gentle Fused Clapton MTL 316SS Heating Wire(3 Meters) $3.99
The Vivismoke Gentle Fused Clapton Heating Resistance MTL Wire is perfect for RBA / RTA / RDA atomizers. The wire is made of 316 Stainless Steel. It features 30GA x 3 + 40GA gauge and 1.89ohm resistance value per feet, which will be a good choice for DIY.
Original Vivismoke Gentle Fused Clapton MTL Ni80 Heating Wire(3 Meters) $4.29
The Vivismoke Gentle Fused Clapton Heating Resistance MTL Wire is perfect for RBA / RTA / RDA atomizers. The wire is made of Ni80. It features 32GA x 3 + 40GA gauge and 4.03ohm resistance value per feet, which will be a good choice for DIY.
3FVAPE - Ultimate Mod & Atomizer Store - World Wide Free Shipping
-
Kauppias
Boxer BF Squonk Mechanical Vape Box Mod Clone original price$14.99, now only$9.99
The Boxer BF Squonk Mechanical Mod Clone is a mechanical squonker without any voltage drop. Powered by 1 x 18650 (Not included), the squonk bottle holds 8ml of e-liquid. The Boxer BF Squonk Mechanical Mod Clone will not disappoint you if you want a hard hitting squonker for sub ohm builds.
FrankenSkull Mechanical Box Mod Clone + Bottom Feeder RDA Vape Kit original price$18.99, now only$10.99
The FrankenSkull mechanical mod Clone is constructed from PC and stainless steel with built-in tank to support bottom feed. The squonker RDA is with Velocity style dual-pole design and bottom airflow.
Avid Lyfe Fast Twist Gyre Mechanical Box Vape Mod Clone original price $30.99, now only $14.99
The Avid Lyfe Gyre Box Mod Clone is a hard hitting mod powered by dual 18650 batteries (not included, Series connection). The Gyre Box Mod is precision machined with state-of-the-art CNC machines out of Aluminum + Stainless Steel. The Gyre Box Mod includes two fast twist gyre tubes. Each Gyre Box Mod is meticulously inspected and hand de-burred to ensure durability, beauty and overall premium functionality.
Original QUIZZ E-cigar 450mAh Pod System Vape Starter Kit $10.99
The QUIZZ E-cigar Vape Kit, a portable size and classic appearance pod system kit, comes with 1.2ml e-juice capacity. It chooses easy filling system to avoid leakage. And it supports 1.8ohm pure cotton coil for best flavor taste, providing you with fantastic experience. In addition, it is powered by 450mAh built-in battery with USB fast charging port. Furthermore, it utilizes 360-rotated bottom cap for convenient operation.
Original QUIZZ ROARK 700mAh Pod System Vape Starter Kit with 3D Sculpture of Lion King Panel $18.69
The QUIZZ Roark Kit is compatible with Jull and Pax pod. It is powered by 700mAh built-in battery (Grade A battery) and comes with 1.2ml e-juice capacity. With pure cotton coil, fast charge and easy filling design, this kit will provide you best flavor taste, beast cloud. Here is a 3D sculpture of Lion Ling panel for Roark Kit. What's more, preheating function, battery level display and various protections are also available for this kit.
Original QUIZZ Nic 650mAh Pod System Vape Starter Kit $10.99
The QUIZZ Nic Pod System Vape Kit, a tiny size with fashionable appearance pod system kit, adopts 2ml e-juice capacity with easy filling design to avoid leakage. Equipped with dual airflow design, it supports 1.2ohm pure cotton coil that will bring you best flavor taste. Nic Pod Kit is powered by 650mAh built-in battery with micro USB port, fully charged about 1.5 hours. What's more, it utilizes adjustable output voltage: 2.5V - 3.0V - 3.5V - 4.0V, which will meet your different vaping demands.
Original QUIZZ E-cigar Pod System Vape Kit Replacement Cartridge with 1.8ohm Cotton Coil(3 PCS) $6.19
The QUIZZ E-cigar Replacement Pod Cartridge is designed for QUIZZ E-cigar Pod System Vape Kit as a replacement part. It features 1.8ohm resistance coil and comes with 1.2ml e-juice capacity. 3 PCS / Pack.
Original QUIZZ ROARK Pod System Vape Kit Replacement Pod Cartridge(3 PCS) $8.79
The QUIZZ ROARK Replacement Pod Cartridge is designed for QUIZZ ROARK Pod System Vape Kit as a replacement part. It comes with 1.2ml e-juice capacity. 3 PCS / Pack.
Original Coil Master Stainless Steel + Ceramic Straight Tip Tweezers for E-Cigarettes / RDA / RTA / RDTA Vape Atomizer $4.99
The Coil Master Straight Tip Tweezer can withstand the high temperature when you dry fire your coil. Making coil building so much easier. It is a great and handle tool if you are into rebuildable atomizers.
Replacement 810 Drip Tip for SMOK TFV8 / TFV12 Tank / Kennedy / Battle / Reload RDA $1.49
The 810 Replacement drip tip is made of POM and Acrylic, it is suitable for SMOK TFV8 Tank, TFV8 Big Baby Tank, TFV12 Tank, Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA.
3FVAPE - Ultimate Mod & Atomizer Store - World Wide Free Shipping
-
Kauppias
Original AIRISTECH Nico 6.8W 450mAh Pod System Vaporizer Vape Starter Kit with 14 x 5.7mm Pod Adapter $14.99
The Airistech Nico Pod System, with the ultra-portable design, the Nico Kit is powered by built-in 450mAh battery and max output 6.8W, pressing the button to adjust the working voltage from 2.9V / 3.7V / 4.2V. The voltage selected is indicated by the color of the LED light around the power button. The Airistech Pod can hold 1.0ml e-juice and built-in 1.5ohm quartz coil, the patent Qcell Quartz coil technology will reduce the waste, improves flavor and prevents clogging, will bring you the purest flavor. The Pod with side e-juice refill design and silicone stopper, easy to inject your favorite e-juice without leaking. First time filling the pod, wait 3 minutes for the liquid to soak into the coil. the packing comes with the 14 x 5.7mm pod adapter, which allows the Airistech Nico compatible with various pods.
Original Kiriner Deimos 30W 950mAh MTL / DTL Pod System Vape Starter Kit $22.99
The Kiriner Deimos Pod System Vape Kit is constructed from stainless steel frame with luxurious panels and powered by 950mAh Built-in Battery with maxium output 30W. Deimos Kit has a 3 levels of power adjustment from low, medium to high. Deimos is compatible with both freebase nicotine liquid or nicotine salt. Also, it supports adjustable airflow for mouth-to-lung (MTL) and direct-lung vaping (DTL).
Dispensing Blunt Syringe Needle Tip for E-liquid Syringe E-juice Injector Refilling Tool $0.39
The Dispensing Blunt Syringe Needle Tip is made of Stainless Steel material in 25.4mm length and 14GA, which is suitable for E-liquid Syringe E-juice Injector Refilling Tool. The needles is blunt, which can avoid accidental injuries. The long needle can go deeper into a bottle and draw up e-juice easily. The short one is tailored for CE2 / CE3 cartomizers to refill e-juice. They are not compatible with e-juice bottles and the long needle can not be used to inject e-juice into CE2 / CE3 cartomizer.
Dispensing Blunt Syringe Needle Tip for E-liquid Syringe E-juice Injector Refilling Tool $0.69
The Dispensing Blunt Syringe Needle Tip is made of Stainless Steel material in 30mm length and 16GA, which is suitable for E-liquid Syringe E-juice Injector Refilling Tool. The needles is blunt, which can avoid accidental injuries. The long needle can go deeper into a bottle and draw up e-juice easily. The short one is tailored for CE2 / CE3 cartomizers to refill e-juice. They are not compatible with e-juice bottles and the long needle can not be used to inject e-juice into CE2 / CE3 cartomizer.
Dispensing Blunt Syringe Needle Tip for E-liquid Syringe E-juice Injector Refilling Tool $0.99
The Dispensing Blunt Syringe Needle Tip is made of Stainless Steel material in 55mm length and 18GA, which is suitable for E-liquid Syringe E-juice Injector Refilling Tool. The needles is blunt, which can avoid accidental injuries. The long needle can go deeper into a bottle and draw up e-juice easily. The short one is tailored for CE2 / CE3 cartomizers to refill e-juice. They are not compatible with e-juice bottles and the long needle can not be used to inject e-juice into CE2 / CE3 cartomizer.
Dispensing Blunt Syringe Needle Tip for E-liquid Syringe E-juice Injector Refilling Tool $0.29
The Dispensing Blunt Syringe Needle Tip is made of Stainless Steel material in 25.4mm length and 21GA, which is suitable for E-liquid Syringe E-juice Injector Refilling Tool. The needles is blunt, which can avoid accidental injuries. The long needle can go deeper into a bottle and draw up e-juice easily. The short one is tailored for CE2 / CE3 cartomizers to refill e-juice. They are not compatible with e-juice bottles and the long needle can not be used to inject e-juice into CE2 / CE3 cartomizer.
Replacement Wide Bore 510 Drip Tip for RDA / RTA / RDTA / Sub-Ohm Tank Vape Atomizer - Type A $1.99
The Replacement Wide Bore 510 Drip Tip is made of delrin and it is suitable for all atomizers that fit 510 drip tip, such as OBS Engine 2 RTA, GeekVape Ammit MTL RTA, Phevanda Bell MTL RDA, Gas Mods G.R.1 GR1 Pro RDA, Vapefly Galaxies MTL Squonk RDTA, Vandy Vape Berserker MTL RDA, Ubertoot MTL RTA.
Replacement Wide Bore 510 Drip Tip for RDA / RTA / RDTA / Sub-Ohm Tank Vape Atomizer - Type B $1.99
The Replacement Wide Bore 510 Drip Tip is made of delrin and it is suitable for all atomizers that fit 510 drip tip, such as OBS Engine 2 RTA, GeekVape Ammit MTL RTA, Phevanda Bell MTL RDA, Gas Mods G.R.1 GR1 Pro RDA, Vapefly Galaxies MTL Squonk RDTA, Vandy Vape Berserker MTL RDA, Ubertoot MTL RTA.
Replacement Wide Bore 510 Drip Tip for RDA / RTA / RDTA / Sub-Ohm Tank Vape Atomizer - Type C $1.99
The Replacement Wide Bore 510 Drip Tip is made of delrin and it is suitable for all atomizers that fit 510 drip tip, such as OBS Engine 2 RTA, GeekVape Ammit MTL RTA, Phevanda Bell MTL RDA, Gas Mods G.R.1 GR1 Pro RDA, Vapefly Galaxies MTL Squonk RDTA, Vandy Vape Berserker MTL RDA, Ubertoot MTL RTA.
Replacement Wide Bore 510 Drip Tip for RDA / RTA / RDTA / Sub-Ohm Tank Vape Atomizer - Type D $1.99
The Replacement Wide Bore 510 Drip Tip is made of delrin and it is suitable for all atomizers that fit 510 drip tip, such as OBS Engine 2 RTA, GeekVape Ammit MTL RTA, Phevanda Bell MTL RDA, Gas Mods G.R.1 GR1 Pro RDA, Vapefly Galaxies MTL Squonk RDTA, Vandy Vape Berserker MTL RDA, Ubertoot MTL RTA.
Original Kiriner Deimos Pod System Vape Kit Replacement Cartridge with 1.2ohm Mesh Coil(2 PCS) $6.99
The Kiriner Deimos Replacement Cartridge is designed for Kiriner Deimos Pod System Vape Kit as a replacement part. It features 2.5ml e-juice capacity and comes with 1.2ohm mesh coil. 2 PCS / Pack.
Original Kiriner Deimos Pod System Vape Kit Replacement Cartridge with 0.6ohm Mesh Coil(2 PCS) $6.99
The Kiriner Deimos Replacement Cartridge is designed for Kiriner Deimos Pod System Vape Kit as a replacement part. It features 2.5ml e-juice capacity and comes with 0.6ohm mesh coil. 2 PCS / Pack.
3FVAPE - Ultimate Mod & Atomizer Store - World Wide Free Shipping
-
Kauppias
Original Innokin Kroma-R Zlide 80W VW Box Vape Mod $35.99
The Innokin Kroma R Zlide Mod is powered by single 18650 battery (Not included), Kroma R has 80W high power, which can definitely satisfy the vapor chaser. In addition, the Kroma R Mod uses Innokin's proprietary chip with the most diverse features and all the most popular working modes. Enjoy great vaping with Wattage (6~80W) and Voltage (1~7.5V) outputs and Soft, Normal and Boost Modes. All important information is clearly displayed on the bright OLED screen including battery charge, wattage / voltage, coil resistance, puff count, voltage out and wattage lock. The Kroma-R features 2A Micro-USB quick charge and integrated safety protections.
Original Steel Vape Phoenix Mechanical Squonk Box Mod + RDA Vape Kit original price$44.99, now only$14.99
The original Steel Vape Phoenix Squonker Kit consists of Steel Vape Phoenix Squonk Box Mod and Phoenix BF RDA. Mod: The original Steel Vape Phoenix Box Mod is a bottom feeder squonk mechanical box mod with 7.5ml food grade silicone squonk bottle. It is powered by one single 20700 battery or 18650 battery with fireproof PC adapter tube. The back cover panel can be attached to the mod with 5 magnets on each side. RDA: The Steel Vape Phoenix BF RDA is a 24mm dripper constructed from aluminum cap and stainless steel base. The deck features dual post design and top mounted screws for easy single coil building. The airflow is adjustable via the dual airholes at the bottom. Standard 810 PEI drip tip is included.
Original Steel Vape Phoenix Mechanical Bottom Feeder Squonk Box Vape Mod original price$39.99, now only$12.99
The original Steel Vape Phoenix Box Mod is a bottom feeder squonk mechanical box mod with 7.5ml food grade silicone squonk bottle. It is powered by one single 20700 battery or 18650 battery with fireproof PC adapter tube. The back cover panel can be attached to the mod with 5 magnets on each side.
Original Steel Vape Sebone Hybrid Mechanical Mod + RDA Vape Kit original price$40.99, now only$14.99
The original Steel Vape Sebone mechanical mod kit consists of Sebone mech mod and Sebone RDA.
Original Steel Vape Sanctuary Mechanical Box Vape Mod original price$39.99, now only$14.99
The original Steel Vape Sanctuary Box Mod is an unregulated device with Mosfet chip to make it safe when vaping. It is powered by dual 18650 batteries (not included) in parallel. The mod supports resistance at between 0.1 and 3ohms. The 510 connetor is spring loaded and there is no overhang with even 26mm atomizer.
Original Steel Vape Aurora 80W VW Box Mod Vape Kit with Sub Ohm Tank Clearomizer original price$37.99, now only$14.99
The original Steel Vape Aurora VW Box Mod Vape Kit consists of Aurora VW Box Mod and a Sub Ohm Tank Clearomizer. Aurora Mod Kit is constructed from Stainless Steel and ABS material. It is powered by 1 x 18650 Battery (Not included) with output wattage range from 5W to 80W and it comes with a 3.0ml e-juice capacity tank for refilling.
Original MadaoTech Airforce One V2 RDA original price$14.99, now only$4.99
The MadaoTech Airforce One V2 RDA Rebuildable Dripping Atomizer is made of Stainless Steel. It comes with 2 posts design. This RDA features a 3.5ml capacity and 23mm diameter.
Original Steel Vape Compass RDA original price$18.99, now only$4.99
The Steel Vape Compass RDA is constructed from Stainless Steel and Alumunum in 25mm diameter. The RDA comes with two cap design: one stainless steel cap that show your big vaping clouds; another aluminum AFC cap that can make you enjoy your flavor taste. Roulette style for coil-building, total different from traditional coil-screwing huge space and manual roulette style for building coils.
Original Steel Vape ECG Bottom Feeder RDA with BF Pin original price$25.99, now only$4.99
The Steel Vape ECG Bottom Feeder RDA is constructed from Stainless Steel in 24mm diameter. The RDA comes with two clamp style posts in 45 degrees angle, easy build 1 or 2 coils. Circle PEI insulator around bottom, reduce power waste and cap temperature. Adjustable four cyclic admission airhole,smoother airflow control, atomizer working more comprehensive, meanwhile airflow cooling effect to bottom. 15 round holes inside the upper of the center cap, cluster effect function, filtration and reduction vape temperature, retention and condensation steam, making vape stronger and flavor better
Original Steel Vape EX RDA original price$22.99, now only$5.99
The Steel Vape EX RDA is with innovative one post unlimited build deck and 150 degree flip cap, magnetic function, fun of vapor. The RDA is adjustable airflow control from the bottom. The EX RDA supports three type of drip tips and comes with 510 drip tip adapter.
3FVAPE - Ultimate Mod & Atomizer Store - World Wide Free Shipping
-
Kauppias
Original Steel Vape Tailspin RDTA original price$22.99, now only$6.99
The Steel Vape Tailspin RDTA is a 25mm atomizer which can be used as either RDA or RTA. The deck features dual post design with two post holes at each post, side filling port for easy refilling, 6mm deep juice well, AFC drip tip cap to adjust side airflow. Resin and POM drip tip are included.
Original Innokin GO S 13W 1500mAh Vape Pen Starter Kit with MTL Tank Atomizer $26.99
The Innokin GO S Vape Pen Kit consists of GO S 1500mAh Mod Device and GO S MTL Tank Atomizer, which is a slim all-in-one pen-style vape kit, which made of stainless steel and PCTG plastic with lightweight dimensions, with a matte textured surface. Powered by 1500mAh inbuilt battery and maintain a constant 13W battery output, the Innokin GO S Kit provides you an all-day-long vaping experience. Charged with micro-USB, the GO S features a tri-color battery capacity indicator and integrated safety protections. One-button ignition activation, easy operation. As for Innokin GO S Tank, it is a tank used as MTL (mouth to lung) vape and can hold 2ml e-juice. It also features a 'slide to open' top-fill with a silicone seal. The tank operates for direct to lung vaping with the included specially designed 1.6ohm coil, with heads are made with organic cotton and wood-pulp wicking, it will create the intense flavors and bring you a healthy vape experience.
Original Lost Vape Prana 12W 500mAh Pod System Vape Starter Kit $26.99
The Lost Vape Prana Pod System, heralding a compact dimunitive shape, is powered by 500mAh rechargeable battery, and comes paired with a 1.0ml refillable pod with an integrated 1.0ohm coil. Constructed from quality zinc-alloy, the chassis is impervious to light falls and drops, mitigating damage to the proprietary chipset within. Housed inside is a 500mAh rechargeable battery, providing ample power to fire the 1.0ohm coil, vaporizing the contents to create delicious vapor from your favorite E-juice or nicotine salts. Holding up to 1.0ml within the refillable pod, the PRANA Pod System is the next vaping pod system that should be added to the collection, delivering a compact portable profile and exquisite vapor output that is perfect for those looking for discretion or love vaping on-the-go.
Kindbright Replacement 510 Drip Tip for RDA / RTA / RDTA / Sub-Ohm Tank Vape Atomizer $3.99
The Kindbright Replacement 510 Drip Tip is made of stainless steel and it is suitable for all atomizers that fit 510 drip tip, such as OBS Engine 2 RTA, GeekVape Ammit MTL RTA, Phevanda Bell MTL RDA, Gas Mods G.R.1 GR1 Pro RDA, Vapefly Galaxies MTL Squonk RDTA, Vandy Vape Berserker MTL RDA, Ubertoot MTL RTA.
Original Lost Vape Prana Pod System Vape Kit Replacement Empty Cartridge $5.99
The Lost Vape Prana Pod Cartridge is designed for Lost Vape Prana Pod System Vape Kit as a replacement, which features 1.0ml e-juice capacity.
3FVAPE - Ultimate Mod & Atomizer Store - World Wide Free Shipping
-
Kauppias
SXK Mission XV KRMA GEN Bridge RBA Atomizer Clone with 5 Airflow Reducers for SXK BB / Billet Box Mod Vape Kit original price$19.90, now only$17.99
The SXK Mission XV KRMA GEN Bridge Clone is compatible with Billet Box Mod Vape Kit, which is made of 316 Stainless Steel. It comes with 5 Airflow Reducers (Inner Hole Diameter: 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm) and a PEEK insulators. The Bridge features a fully adjustable airflow system to suit open airflow to mouth to lung (MTL) vaping users.
Original ULTRONER Gather MTL / DTL RDA / RDTA Dripping Tank Vape Atomizer original price$45.00, now only$34.99
The ULTRONER Gather RDA / RDTA Rebuildable Dripping Tank Vape Atomizer is constructed from stainless steel and stabwood material in 37mm height (RDTA) / 30mm height (RDA) and 22mm diameter. The Atomizer is convertible between RDA and RDTA modes, it supports bottom feeding for Squonk mods. It comes with changeable airflow inserts with 3 different sizes that suitable for MTL and DTL vape. Also, the RDA / RDTA atomizer supports top filling and bottom fill options. Furthermore, it comes with a stabwood accent ring to add an original look, ultem drip tip and transparent tank section.
Original Justfog Q16 Pro 900mAh Mod Battery Vape Starter Kit with Sub Ohm Tank Clearomizer $25.99
The Justfog Q16 Pro Vape Starter Kit consists of Q16 Pro Clearomizer and Q16 Pro Battery, which is a pro version of JUSTFOG Q16 Kit, it is constructed from Anodized-AI and PC material, and comes with lightness and elegant body that is portable to be on the go. Powered by 900mAh built-in battery, the Justfog Q16 Pro provides an all-day-long vape to vapors. The easy top refilling system ensures an anti-leak vape. The Justfog Q16 Pro has a 4-level voltage adjustment range from 3.5V to 4.4V. As for the tank, the adjustable airflow system can perfectly meet your different vapor needs. The constant voltage output of Justfog Q16 Pro brings a stable performance to the users. Justfog Q16 Pro is equipped with multiple protections such as temperature control and short-circuit prevention, which will offer a comfortable and safe vaping experience.
Original VapeSoon Replacement RPM DC Coil Head for SMOK RPM40 Pod System Vape Kit(5 PCS) $6.79
The VapeSoon RPM DC Coil Head is designed for SMOKTech SMOK RPM40 Pod System Vape Kit as a replacement part, the DC Coil is made of brass material, it features 0.8ohm coil resistance and the best output power is 16W. 5 PCS / Pack.
Original VapeSoon Replacement RPM RBA Coil Head for SMOKTech SMOK RPM40 / Fetch Mini Pod System Vape Kit $5.09
The VapeSoon RPM RBA Coil Head is designed for SMOKTech SMOK RPM40 / Fetch Mini Pod System Vape Kit as a replacement part, the RBA Coil is made of brass material, it fits for DIY vaping lovers.
Original VapeSoon Replacement PnP-VM1 Coil Head for Voopoo VINCI / VINCI R / VINCI X Pod Kit(5 PCS) $7.09
The VapeSoon Replacement PnP-VM1 Coil Head is designed for VOOPOO VINCI Pod System Vape Kit as a replacement part, the PnP-VM1 Coil is made of brass material, it features 0.3ohm coil resistance and output power range from 32W to 40W. 5 PCS / Pack.
Original VapeSoon PnP-R1 MTL Regular Coil for DRAG Baby / FIND Trio / VINCI / VINCI R / VINCI X Kit(5 PCS) $7.09
The VapeSoon Replacement PnP-R1 MTL Regular Coil Head is designed for VOOPOO VINCI DRAG Baby / FIND Trio / VINCI / VINCI R / VINCI X Pod System Vape Kit as a replacement part, the PnP-R1 Coil is made of brass material, it features 0.8ohm coil resistance and output power range from 12W to 18W. 5 PCS / Pack.
Original VapeSoon Replacement PnP-M1 Coil Head for Voopoo VINCI / VINCI R / VINCI X Pod Vape Kit(5 PCS) $7.09
The VapeSoon Replacement PnP-M1 Coil Head is designed for VOOPOO VINCI / VINCI R / VINCI X Pod System Vape Kit as a replacement part, the PnP-M1 Coil is made of brass material, it features 0.45ohm coil resistance and output power range from 28W to 35W. 5 PCS / Pack.
Original VapeSoon PnP-C1 MTL Ceramic Coil for Voopoo Finic P18 Aio/Drag Baby Trio/Find S Trio Kit(5 PCS) $7.09
The VapeSoon Replacement PnP-C1 MTL Ceramic Coil Head is designed for VOOPOO Finic P18 Aio / Drag Baby Trio / Find S Trio Pod / VINCI / VINCI X / VINCI R System Vape Kit as a replacement part, the PnP-C1 Coil is made of brass material, it features 1.2ohm coil resistance and output power range from 10W to 15W. 5 PCS / Pack.
Original VapeSoon PnP-M2 Half-DL Mesh Coil for Voopoo DRAG Baby/FIND Trio/VINCI/VINCI R/VINCI X(5 PCS) $7.09
The VapeSoon Replacement PnP-M2 Half-DL Single Mesh Coil Head is designed for VOOPOO DRAG Baby/FIND Trio / VINCI / VINCI R / VINCI X Pod System Vape Kit as a replacement part, the PnP-M2 Half-DL Single Mesh Coil is made of brass material, it features 0.6ohm coil resistance and output power range from 20W to 28W. 5 PCS / Pack.
Original VapeSoon 510 Thread Adapter Connector for Voopoo VINCI / VINCI R / VINCI X Pod System Vape Kit $2.79
The VapeSoon 510 Thread Adapter Connector is designed for Voopoo VINCI / VINCI R / VINCI X Pod System Vape Kit, it can switch your Voopoo VINCI / VINCI R / VINCI X Pod Mod to a normal Pod Mod which can be fitted to any 510 thread atomizer that provide more choice for you. The 510 Thread Adapter is made of POM (Outer Housing).
Original VapeSoon 510 Thread Adapter Connector for SMOKTech SMOK RPM40 Pod System Vape Kit $2.89
The VapeSoon 510 Thread Adapter Connector is designed for SMOKTech SMOK RPM40 Pod System Vape Kit, it can switch your SMOKTech SMOK RPM40 Pod Mod to a normal Pod Mod which can be fitted to any 510 thread atomizer that provide more choice for you. The 510 Thread Adapter is made of POM (Outer Housing).
3FVAPE - Ultimate Mod & Atomizer Store - World Wide Free Shipping
-
Kauppias
Original Reewape 510 Thread Adapter Connector for Voopoo VINCI / VINCI R / VINCI X Pod System Kit(Magnetic Version) $3.99
The Reewape 510 Thread Adapter Connector is designed for Voopoo VINCI / VINCI R / VINCI X Pod System Vape Kit, it can switch your Voopoo VINCI Pod Mod to a normal Pod Mod which can be fitted to any 510 thread atomizer that provide more choice for you. This is Magnetic Version.
510 Thread Adapter Connector for Voopoo VINCI / VINCI R / VINCI X Pod System Vape Kit $3.59
The 510 Thread Adapter Connector is designed for Voopoo VINCI / VINCI R / VINCI X Pod System Vape Kit, it is made of resin (outer housing) and brass (510 threading connector) and can switch your Voopoo VINCI Pod Mod to a normal Pod Mod which can be fitted to any 510 thread atomizer that provide more choice for you.
Original SMOKTech SMOK Fetch Pro 80W Pod Vape Kit Replacement Empty RPM Cartridge w/o Coils(3 PCS) $6.99
The SMOK Fetch Pro Pod Cartridge is specially designed for the SMOK Fetch Pro Pod System Vape Kit, which is born for the vapor and flavor. SMOK Fetch Pro Replacement Pods Cartridge offering a 4.3ml for use with SMOK RPM Coils (Coil not included). The Fetch Pro Pod cartridge feature a silicone stoppered side fill system, dual slotted bottom pod-based adjustable airflow control, and can be paired with a myriad of coils from the SMOK RPM Coil Series to help create flavored vapor in either an MTL or DTL output, depending on the type of coil installed. In addition, Fetch Pro RPM pod and is designed with adjustable airflow. Just like an atomizer, the adjustable airflow ring at the bottom can be rotated to adjust the air input. What's more, the Fetch Pro RPM Pod is compatible with all RPM40 coils to maximize coil compatibility and meet diverse vaping needs. The pods also perfectly match the Fetch Pro device via a magnet connection.
Original SMOKTech SMOK Fetch Pro 80W Pod Vape Kit Replacement Empty RGC Cartridge w/o Coils(3 PCS) $6.99
The SMOK Fetch Pro Pod Cartridge is specially designed for the SMOK Fetch Pro Pod System Vape Kit, which is born for the vapor and flavor. SMOK Fetch Pro Replacement Pods Cartridge offering a 4.0ml e-juice capacity for use with SMOK RGC Coils (coil not included). The Fetch Pro Pod cartridge feature a silicone stoppered side fill system, dual slotted bottom pod-based adjustable airflow control, and can be paired with a myriad of coils from the SMOK RGC Coil Series to help create flavored vapor in either an MTL or DTL output, depending on the type of coil installed. In addition, Fetch Pro RGC pod are both designed with adjustable airflow. Just like an atomizer, the adjustable airflow ring at the bottom can be rotated to adjust the air input. The pods also perfectly match the Fetch Pro device via a magnet connection.
Original Vapelustion Hannya Nano Pod System Vape Kit Replacement Cartridge with 1.2ohm Coil(2 PCS) $6.49
The Vapelustion Replacement Cartridge is designed for Vapelustion Hannya Nano Pod System Vape Kit as a replacement part, which features 2.0ml e-juice capacity and comes with 1.2ohm resistance coil. It can be refilled 5 to 6 times. 2 PCS / Pack.
Original Vapelustion Hannya Nano Pod System Vape Kit Replacement Panels(2 PCS) $8.25
The Vapelustion Hannya Nano Replacement Panel is designed for Vapelustion Hannya Nano Pod System Vape Kit as a replacement part. 2 PCS / Pack.
Original SMOKTech SMOK Fetch Pro 80W VW Mod Pod System Vape Starter Kit $34.99
The SMOK Fetch Pro Pod System Vape Kit is a versatile, light and delicate appearance Mod Pod kit. The overall body size is 20 percents smaller than similar products in the vape market, providing good portability and feel. SMOK Fetch Pro Mod Pod kit is powered by a single 18650 battery (Not included) to support long-time vaping. What's more, it employs USB Type-C that provides reliable power and fast transfer speed. The battery cap is push-pull for easier battery replacement. In addition, Fetch Pro is equipped with the newly developed core unit that enables the adjustable power from 5W to 80W. You can switch from intense cloud to light cloud according to your preference. There is a Large Firing Bar Button on the side of the fuselage. The large sidebar button offers a wider pressing area for better interaction. What's more, the SMOK Fetch Pro pod vape kit is equipped with a 0.96 inch TFT screen to show detail vaping data.
3FVAPE - Ultimate Mod & Atomizer Store - World Wide Free Shipping
-
Kauppias
Original Steel Vape Tailspin Hybrid Mechanical Mod + RDTA Vape Kit original price$35.99, now only$14.99
The original Steel Vape Tailspin Kit consists of Tailspin Mod and Tailspin RDTA. Mod: The Steel Vape Tailspin Mod is a high quality mech mod that features replaceable aluminum and resin sleeve, hidden fire button with spring design, copper battery contact and can support 0.05ohm minimum atomizer resistance. It is powered by single 18650 battery (not included). RDTA: The Steel Vape Tailspin RDTA is a 25mm atomizer which can be used as either RDA or RTA. The deck features dual post design with two post holes at each post, side filling port for easy refilling, 6mm deep juice well, AFC drip tip cap to adjust side airflow. Resin and POM drip tip are included.
Original Steel Vape ECG Bottom Feeder RDA with BF Pin original price$25.99, now only$4.99
The Steel Vape ECG Bottom Feeder RDA is constructed from Stainless Steel in 24mm diameter. The RDA comes with two clamp style posts in 45 degrees angle, easy build 1 or 2 coils. Circle PEI insulator around bottom, reduce power waste and cap temperature. Adjustable four cyclic admission airhole,smoother airflow control, atomizer working more comprehensive, meanwhile airflow cooling effect to bottom. 15 round holes inside the upper of the center cap, cluster effect function, filtration and reduction vape temperature, retention and condensation steam, making vape stronger and flavor better
Original VOZOL Ark 30W 1000mAh VW Mod Pod System Vape Starter Kit $29.99
The Vozol Ark VW Mod Pod System Vape Starter Kit has a streamline body and fashionable appearance, which features PVD acrylic panels of new aesthetic pattern. It is visually fancy and compact being powered by a 1000mAh built-in batter that supports 5~30W output wattage and comes with 3ml e-juice capacity cartridge. Furthermore, it comes with the independent coil design to provide two vaping choices: 0.6ohm Mesh DL and 1.4ohm Dual MTL vaping. And the Ark Kit features biggest side fire button design for smooth click and easy operating. In addition to this, it's 0.69" screen can show all specifications, including battery life, wattage, voltage, resistance etc. Top filling cap design for easy filling.
E-juice Injector / E-liquid Syringe Refilling Tool without Needle Tip(5 PCS) $1.29
The E-liquid Syringe is constructed with luer lock connector and soft silicon caps. High quality industrial grade luer lock connector, perfect for storage. It contains graduations / markings for volume measurement, which make it easier to accurately make your own e-liquid. It is a great transfer tool every DIYer should have in their kit! This one has 1ml capacity. 5 PCS / Pack.
E-juice Injector / E-liquid Syringe Refilling Tool without Needle Tip(5 PCS) $1.49
The E-liquid Syringe is constructed with luer lock connector and soft silicon caps. High quality industrial grade luer lock connector, perfect for storage. It contains graduations / markings for volume measurement, which make it easier to accurately make your own e-liquid. It is a great transfer tool every DIYer should have in their kit! This one has 5ml capacity. 5 PCS / Pack.
E-juice Injector / E-liquid Syringe Refilling Tool without Needle Tip(5 PCS) $1.99
The E-liquid Syringe is constructed with luer lock connector and soft silicon caps. High quality industrial grade luer lock connector, perfect for storage. It contains graduations / markings for volume measurement, which make it easier to accurately make your own e-liquid. It is a great transfer tool every DIYer should have in their kit! This one has 10ml capacity. 5 PCS / Pack.
3FVAPE - Ultimate Mod & Atomizer Store - World Wide Free Shipping
-
Kauppias
E-juice Injector / E-liquid Syringe Refilling Tool without Needle Tip(5 PCS) $4.99
The E-liquid Syringe is constructed with luer lock connector and soft silicon caps. High quality industrial grade luer lock connector, perfect for storage. It contains graduations / markings for volume measurement, which make it easier to accurately make your own e-liquid. It is a great transfer tool every DIYer should have in their kit! This one has 30ml capacity. 5 PCS / Pack.
Original Vivismoke Wire Mini Cutter Pliers for RDA / RTA / RDTA Vape Atomizers $3.49
The Vivismoke Wire Cutter Mini Diagonal Cutter Pliers is made from Chrome-Vanadium Steel. The handle is made from plastic for comfortable grip. It is a convenient tool for cutting leads of coils, and cutting wires when you making your own coils. It is suitable for RDA / RTA Rebuildable Atomizers or DIY Coil Building.
Original Vivismoke Coil Stick One DIY Coil Building Tool for RDA / RTA / RDTA Atomizers $4.98
The Vivismoke Coil Stick One is made of Avation Aluminum, it comes with 2.0 / 2.5 / 3.7 / 4.4 windding rod dimensions and it is suitable for RBA / RDA / RTA Rebuildable Atomizers or DIY Coil Building. Make your own coils easier.
Original Vivismoke 4 in 1 Screwdriver for RDA / RTA / RDTA Atomizers $2.99
The Vivismoke 4 in 1 Screwdriver comes with 4 different bits, which are PH00, Flat 2.5, Hex 1.5, Hex 1.27. It is suitable for RDA / RTA / RDTA Rebuildable Atomizers.
Original Vivismoke Handcrafted Staple Alien Ni80 Coil + Organic Wick for RDA / RTA / RDTA Atomizers(2 PCS) $4.79
The Vivismoke prebuilt handcrafted Staple Alien 0.13ohm Ni80 Coil are finely crafted coils twisted with machine-like precision for those that are looking to save time in rebuilding, available in a myriad of advanced configurations for immediate sophisticated set-up. 2 PCS / Pack.
Original Vivismoke 510 Display Base Stand for RDA / RTA / RDTA / Sub Ohm Tank Atomizer / Clearomizer $2.49
The Vivismoke 510 display base stand is made of Aluminum Alloy. It is used to display or place RDA / RTA / RDTA atomizers. It features 510 threading connection, which fits most standard atomizers. Use it for setting down for DIY user building coils, No more tanks falling on their sides and leaking every where. The base diameter is 34.5mm and the height is 20mm.
Original G-taste Transbost 510 Thread Adapter Connector for Geekvape Aegis Boost Vape Kit $3.99
The G-taste Transbost 510 Thread Adapter Connector is designed for Geekvape Aegis Boost Vape Kit, it can switch your Geekvape Aegis Boost Kit into a normal 510 thread box mod kit to use different atomizers.
Original VOZOL Ark Pod System Vape Kit / Cartridge Replacement MTL Dual Coil Head(5 PCS) $10.99
The VOZOL Ark Replacement MTL Dual Coil Head is designed for VOZOL Ark Pod System Vape Kit / Cartridge as a replacement part. It features 1.4ohm coil resistance. 5 PCS / Pack.
Original VOZOL Ark Pod System Vape Kit / Cartridge Replacement DL Mesh Coil Head(5 PCS) $10.99
The VOZOL Ark Replacement DL Mesh Coil Head is designed for VOZOL Ark Pod System Vape Kit / Cartridge as a replacement part. It features 0.6ohm coil resistance. 5 PCS / Pack.
Original VOZOL Ark Pod System Vape Kit Replacement Empty Cartridge $4.39
The VOZOL Ark Replacement Empty Cartridge is designed for VOZOL Ark Pod System Vape Kit as a replacement part. It features 3ml e-juice capacity.
3FVAPE - Ultimate Mod & Atomizer Store - World Wide Free Shipping
-
Kauppias
GET LOW MODS GLM V1 Hybrid Mechanical Vape Mod Clone $14.99
The GET LOW MODS GLM V1 Hybrid Mechanical Vape Mod Clone is another strong electric cigarette. Which the beautiful purple design should be used for this is a freshly fired electric cigarette. The Mechanical Mod is powered by single 18650 battery (Not included). The body is constructed from copper. It can be polished to give rise to phase. The press pin uses good conductivity copper material, guarantees fast running power. Packed in a beautiful wooden box, it is suitable for purchase as a collection beginners should not use it because there is no power cut because it is a live shot.
Original Sanvape Q8 Pro 40W 1620mAh MTL / DTL VW Mod Pod System Vape Starter Kit $27.99
The Sanvape Q8 Pro 40W VV VW Mod Pod System Vape Starter Kit is a sensational all-in-one Pod System kit, it has a compact box shape and unique design. With a premium zinc alloy frame and unique side panels. Powered by a built-in 1620mAh battery, it has a power range from 5W to 40W while implementing VW, VV modes and various protections. With a 0.69-inch display. Above the display is the remarkable point style - fire button and below it is the adjustment buttons. Directly located on the bottom of the device are the Type-C port, and 2A fast charging via the Type-C port. As for the refillable pod, it can hold up to 4.5ml of e-liquid and comes with two coil options. One is the 0.4ohm mesh coil for DTL, the other is the 1.2ohm regular coil for MTL, which can meet the needs of different vapers. It also adopts an adjustable airflow system and top filling design, and more importantly supports RBA coil replacement.
Original Reewape RUOK 510 Thread Adapter Connector for GeekVape Aegis Boost Pod System Vape Kit $3.99
The Reewape RUOK 510 Thread Adapter Connector is designed for Geekvape Aegis Boost Pod System Vape Kit, it can switch your Geekvape Aegis Boost Kit into a normal 510 thread box mod kit to use different atomizers.
Original Sanvape Q8 Pro Pod System Vape Kit / Cartridge Replacement Coil Head(5 PCS) $6.99
The Sanvape Q8 Pro Replacement Coil Head is designed for Sanvape Q8 Pro Pod System Vape Kit / Cartridge as a replacement part. It features 0.4ohm coil resistance that output power range from 25W to 40W. 5 PCS / Pack.
Original Sanvape Q8 Pro Pod System Vape Kit / Cartridge Replacement Coil Head(5 PCS) $6.99
The Sanvape Q8 Pro Replacement Coil Head is designed for Sanvape Q8 Pro Pod System Vape Kit / Cartridge as a replacement part. It features 1.2ohm coil resistance that output power range from 8W to 13W. 5 PCS / Pack.
Replacement Top Cap for Gas Mods HALA RDTA $5.99
The Replacement Top Cap is designed for Gas Mods HALA RDTA Rebuildable Dripping Tank Atomizer as a replacement part, it is made of POM material.
Replacement Drip Tip for GeekVape Aegis Boost Pod System Vape Kit $1.99
The Replacement Drip Tip is designed for GeekVape Aegis Boost Pod System Vape Kit as a replacement part, it is made of resin material.
510 Thread Adapter Connector with Spring-Loaded Center Pin for GeekVape Aegis Boost Pod Vape Kit $3.59
The 510 Thread Adapter Connector is designed for Geekvape Aegis Boost Vape Kit, it is made of stainless steel (510 threading connector) and POM (outer housing), which can switch your Geekvape Aegis Boost Kit into a normal 510 thread box mod kit to use different atomizers. As for this 510 threading connector, it comes with a special Spring-Loaded 510 Center Pin design that can be fitted for 510 drip tip with different lengths.
Original Sanvape Q8 Pro Pod System Vape Kit / Cartridge Replacement RBA Rebuildable Coil Head $4.99
The Sanvape Q8 Pro Replacement RBA Rebuildable Coil Head is designed for Sanvape Q8 Pro Pod System Vape Kit / Cartridge as a replacement part. It fits for DIY vaping lovers.
Original Hellvape Grimm Pod System Vape Kit / Cartridge Replacement RBA Rebuildable Coil Head $5.99
The Hellvape Replacement RBA Rebuildable Coil Head is designed for Helllvape Grimm Pod System Vape Kit / Cartridge as a replacement part. It fits for DIY vaping lovers.
3FVAPE - Ultimate Mod & Atomizer Store - World Wide Free Shipping
-
Kauppias
Original DOVPO Topside Dual Carbon 200W YIHI Chip TC VW Squonk Box Vape Mod original price$179.99, now only$129.99
The DOVPO Topside Dual Carbon Squonk Mod is constructed from aluminum alloy, carbon fiber, zinc alloy and stainless steel material, which is the updated version of the innovative DOVPO Topside Squonk Mod that is wrapped by new carbon material to present you ingenious design with lightweight and the cozy sense of gripping. Most importantly, with external dual 18650 batteries (Not included) powered by new YIHI chip, the Topside Dual Carbon Squonk Mod can fire up to the 200W output power with VW / TC mode and throw you impeccable and accurate working. The Dual Carbon Squonk Mod also comes with 0.96 inch screen and 10ml large e-juice silicone bottle with easy top filling design, which brings you longer vaping and effective oil leakage resistance.
Original Coil Master ReBuild RBK Kit for Uwell Caliburn Pod System Vape Kit $4.99
The Coil Master ReBuild Kit is designed for Uwell Caliburn Pod System Vape Kit which includes 10 PCS 1.2ohm A1 Double Coils, 20 PCS Cotton, and 1 PCS Rod. It fits for DIY vaping lovers. Coil Master ReBuild Kit for Caliburn is made for pod vapers, which can rebuild their Pods quickly and easily. Save your money to rebuild the coil with this Coil Master ReBuild Kit in just 3 minutes. If you are still worried about running out of Caliburn pods to replace them with new ones, Coil Master ReBuild Kit will solve this problem.
Original Coil Master ReBuild Kit PnP-VM1 RBK for Voopoo VINCI / VINCI X Pod Vape Kit $5.99
The Coil Master ReBuild Kit (for PnP-VM1) is designed for Voopoo VINCI / VINCI X Pod System Vape Kit which includes 10 PCS 0.3ohm Ni80 Mesh Coils, 35 PCS Cotton, and 1 PCS Rod. It fits for DIY vaping lovers. Coil Master ReBuild Kit is made for pod vapers, which can rebuild their Pods quickly and easily. Save your money to rebuild the coil with this Coil Master ReBuild Kit. If you are still worried about running out of VINCI pods to replace them with new ones, Coil Master ReBuild Kit will solve this problem.
Pro V3 Noise Cancellation Bluetooth Earphone Clone with Spare Ear Tips + Wireless Charging Case for iPhone $39.99
The Pro V3 Bluetooth Earphone Clone is designed for your iPhone or other Apple devices. It can be used and connected with your iPhone or other Apple devices by Bluetooth. The Bluetooth Earphone supports Noise Cancellation or Transparency modes. It also supports charge wirelessly or charge using the Lightning Connector. Comes with spare changeable ear tips and Wireless Charging Case.
Original Ehpro Raptor Sub Ohm Tank Replacement Mesh Quad Coil Head(3 PCS) $11.99
The Ehpro Raptor Replacement Mesh Quad Coil Head is designed for Ehpro Raptor Sub Ohm Tank Clearomizer as a replacement part. It features 0.15 + / - 0.03ohm coil resistance that power range from 70W to 100W. The Ehpro Raptor Replacement mesh Coil has everything you love in the common coil, but cheaper, stronger and more durable. 3 PCS / Pack.
Original Coil Master ReBuild Kit PnP-R1 RBK for Voopoo VINCI / VINCI X Pod Vape Kit $5.99
The Coil Master ReBuild Kit (for PnP-R1) is designed for Voopoo VINCI / VINCI X Pod System Vape Kit which includes 10 PCS 1.0ohm Ni80 Double Coils, 40 PCS Cotton, and 1 PCS Rod. It fits for DIY vaping lovers. Coil Master ReBuild Kit is made for pod vapers, which can rebuild their Pods quickly and easily. Save your money to rebuild the coil with this Coil Master ReBuild Kit. If you are still worried about running out of VINCI pods to replace them with new ones, Coil Master ReBuild Kit will solve this problem.
3FVAPE - Ultimate Mod & Atomizer Store - World Wide Free Shipping
Keskustelu
Kaupat
Kirjoitusoikeudet
- Sinä et voi kirjoittaa uusia viestejä
- Sinä et voi kirjoittaa vastauksia
- Sinä et voi muokata liitteitäsi
- Sinä et voi muokata viestejäsi
-
Foorumin säännöt
Lainaa
