-
Joyetech Mod 18650/18350
Yleistä höpötystä modista.
Edullinen ja siistin oloisesti tehty. Istuu käteen ja on mukavan tuntuinen.
Nyt sitten kysymys: Onko näissä jonkunlainen amppeerirajoitin reguloituna/reguloimattomana, pystyykö käyttämään itserakennettavien atojen kanssa matalilla ohmeilla?
-
Vs: Joyetech Mod 18650/18350
Et sitten lukenut Esmoken sivuilta 👀 sininen reguloitu, oranssi akku jännite.
Näpsäkkä putki itsellä käytössä molemmat koot.
-
Vs: Joyetech Mod 18650/18350
Lainaus:
Alkuperäinen postaaja
K-57
Et sitten lukenut Esmoken sivuilta 👀 sininen reguloitu, oranssi akku jännite.
Näpsäkkä putki itsellä käytössä molemmat koot.
Luin luin, mutta meneekö tämä reguloimaton akkujännite kuitenkin jonkun rajoitetun piirin kautta? Eli antaa akun täydet voltit tiettyyn pisteeseen saakka.
Oma Joye mod vielä postin käsissä, mut tuli silti eilen haettua esmokelta vielä bcc ja musta akkuputki siihen kaveriksi ja uusi efestin 18650 imri.
-
Vs: Joyetech Mod 18650/18350
Voisiko joku suositella jotain esteettisesti sopivaa ja edullista rebuildable-systeemiä tuohon nokalle?
Mesh vai silica?
Tosta irtoo löysät 3.4V reguloituna ja reguloimattomana sit sen akun jännitteen verran. Ajattelin että miksi ei tän nokalle vois jotain rakennella jos tehot kuitenkin samat mitä muissakin perus 18650-putkissa.
Meshin osalta en kyl välttämättä näe itseäni toho kädessä hapettamassa verkkoa. Silica varmaan helpompi reitti kulkea?
http://www.finnvape.com/product/465/...iatomisaattori Oisko tollanen näppärä? Vai tarkoittaako toi "uudelleen rakennettava" pelkästään jotain tehtaan vaihtocoileja? Vaikeakin tuikata tohon omat vastuslangat?
-
Vs: Joyetech Mod 18650/18350
Tänään tuleee tuollainen postista joten ei vielä tarkkaa tietoa mutta uskoisin että vastaava rakentaa kuin vivi nova yms illalla lisäää kun olen asiasta paljon viisaampi :esmoke:
-
Vs: Joyetech Mod 18650/18350
Lainaus:
Alkuperäinen postaaja
samiii
Tänään tuleee tuollainen postista joten ei vielä tarkkaa tietoa mutta uskoisin että vastaava rakentaa kuin vivi nova yms illalla lisäää kun olen asiasta paljon viisaampi :esmoke:
Tilasin bargainvapourilta kans splitfire aka hyper 4. Varmaan aika identtinen ton X6 kanssa mut tehdassetuppi oli itselle sopivampi 1.8ohm. Smokin R-tank olis sit muuten samanlainen paitsi et siin on ihan rebuildablea varten tolpat kanthalin kiinnitykseen. Tosin jos tehdassetuppi hyper 4:ssä pelaa hyvin ni ajelen sillä hyvin pitkään, välillä uä-pesurilla puhdistaen uuteen uskoon.
Kerroppa millainen vehjes oli kun saat asiasta selvän :)
-
Vs: Joyetech Mod 18650/18350
Lainaus:
Alkuperäinen postaaja
Natsu
Voisiko joku suositella jotain esteettisesti sopivaa ja edullista rebuildable-systeemiä tuohon nokalle?
Mesh vai silica?
Penelope on ainakin nätti tuon kanssa eli kannattaa tilata vapor freak:in Euforia pene klooni heti, kun sitä alkaa saamaan. Kuvassa Joyetech mod 18350 & penelope ja dna box mod + terminator tank
https://dl.dropbox.com/u/16564794/MiniMOD.jpg
Edit: Unohtu mainita, että tehot riittää tuossa hyvin matalaohmi setupeille penelopen kanssa ja mikään amppeerirajoitin ei ainakaan itsellä iske päälle n.1ohm-1.2ohm setupeilla.
-
Vs: Joyetech Mod 18650/18350
Elikkäs setuppi tehdään irroitettavaan metalliosaan ja vastuslanganpäät tulevat silikooni rinkulan toinen ulkopuolelle ja jää runkoa vasten toinen sisäpuolelle ja ottaa plussapostiin kiinni elikkäs erittäin simppeli rakentaa ja en ainekaan vielä yhtään kuivaa imaisua ole saanut :esmoke:
-
Vs: Joyetech Mod 18650/18350
Lainaus:
Alkuperäinen postaaja
spirit222
Penelope on ainakin nätti tuon kanssa eli kannattaa tilata vapor freak:in Euforia pene klooni heti, kun sitä alkaa saamaan. Kuvassa Joyetech mod 18350 & penelope ja dna box mod + terminator tank
https://dl.dropbox.com/u/16564794/MiniMOD.jpg
Edit: Unohtu mainita, että tehot riittää tuossa hyvin matalaohmi setupeille penelopen kanssa ja mikään amppeerirajoitin ei ainakaan itsellä iske päälle n.1ohm-1.2ohm setupeilla.
Hei hyvä tietää! Just eilen yöllä katselin Penelopeja ja mielessä kävikin et mistä Peneä vastaavan kloonin löytäisi :) Miellyttävän simppeli keksintö ja sen Penen rakenteluvideon katsottuani totesin myös setupin tekemisen erittäin helpon oloiseksi.
-
Vs: Joyetech Mod 18650/18350
Lainaus:
Alkuperäinen postaaja
samiii
Elikkäs setuppi tehdään irroitettavaan metalliosaan ja vastuslanganpäät tulevat silikooni rinkulan toinen ulkopuolelle ja jää runkoa vasten toinen sisäpuolelle ja ottaa plussapostiin kiinni elikkäs erittäin simppeli rakentaa ja en ainekaan vielä yhtään kuivaa imaisua ole saanut :esmoke:
Kuulostaa hyvältä myöskin :)
Näyttää aina vaan niin pieneltä kikkareelta noi atopäät et olen ollut aina hyvin epäileväinen miten onnistun näpräämään niin pieneen tilaan jotain toimivaa :D
-
Vs: Joyetech Mod 18650/18350
Tänään tuli postissa 18650 MOD ja oon todella tyytyväinen. Mulla oli joskus alkuperäinen Bolt varalaitteena ja viimeisimpänä varalaitteena oli plastic bolt 18650 ja tää pesee kyllä molemmat mun mielestä mennen tullen. Hintaansa nähden todella laadukkaan oloinen ja ainakin tää musta-hopea versio on oikeesti ihan mielettömän tyylikäs mun makuun. LR boge tankin kanssa katolla pelittää aivan mielettömän hyvin. Duuni/reissukäytössä tää tulee olemaan kyllä toistaiseksi mun ehdoton ykkövalinta. AW IMR 2000mAh kanssa antaa kyllä mukavat höyryt jopa sinisellä valolla ja puolikkalla akulla. Ei tää mikään taikasauva ole tietenkään, mutta mun mielestä ajaa juuri sen asian minkä lupaa sopuhintaan ja sitä mä juuri hain. ***** viis tähteä ja O0 afromerkki tälle.
-
Vs: Joyetech Mod 18650/18350
Lainaus:
Alkuperäinen postaaja
inrain
Tänään tuli postissa 18650 MOD ja oon todella tyytyväinen. Mulla oli joskus alkuperäinen Bolt varalaitteena ja viimeisimpänä varalaitteena oli plastic bolt 18650 ja tää pesee kyllä molemmat mun mielestä mennen tullen. Hintaansa nähden todella laadukkaan oloinen ja ainakin tää musta-hopea versio on oikeesti ihan mielettömän tyylikäs mun makuun. LR boge tankin kanssa katolla pelittää aivan mielettömän hyvin. Duuni/reissukäytössä tää tulee olemaan kyllä toistaiseksi mun ehdoton ykkövalinta. AW IMR 2000mAh kanssa antaa kyllä mukavat höyryt jopa sinisellä valolla ja puolikkalla akulla. Ei tää mikään taikasauva ole tietenkään, mutta mun mielestä ajaa juuri sen asian minkä lupaa sopuhintaan ja sitä mä juuri hain. ***** viis tähteä ja O0 afromerkki tälle.
Afromerkki :D
Mulla molemmat putket, hopea ja musta. Tuo kivaa vaihtelua. Hopea on tollanen kylmempi metalli ja musta on satiinisen pehmeä kumipintainen <3 Molemmista tykkään.
Käytän itse kans paljon reguloitua moodia = sininen/valkoinen valo, tota keltasta reguloimatonta ei tuu vielä paljoa käytettyä.
Vaikka toi Vapeonly BCC ei nyt mitään mahtihöyryjä ostajilleen tarjonnut, niin suosittelisin kuitenkin sen ostamista Joyetech Modille, vaikkapa ihan sen tyylikkään istuvuuden vuoksi, sehän on Joyetechin sisaryhtiön valmiste ja samasta materiaalistakin tehty. Saumaton istuvuus ja antaa 1.8ohmisena riittoisat höyryt huolettomasti ja varmasti hyvinkin pitkään ison säiliön ja akunkeston vuoksi :) Tottakai sitä voi vielä itse jatkossa viritellä paksummilla silicoilla ja matalempi ohmisilla vastuslangoilla.
Mulla jää kyllä pientä rakoa akkuputken päätycäpin ja putken väliin Efestin 18650 IMR 2200mah akulla, mites sulle istuu toi akku putkeen?
-
Vs: Joyetech Mod 18650/18350
Vasta päivän tykittäny 18350 modilla, mutta hyvin toimii. Ihanan kevyt verrattuna saman akun napostelevaan Provariin. Tämä on kännimodien aatelia.
-
Vs: Joyetech Mod 18650/18350
Lainaus:
Alkuperäinen postaaja
spirit222
Penelope on ainakin nätti tuon kanssa eli kannattaa tilata vapor freak:in Euforia pene klooni heti, kun sitä alkaa saamaan. Kuvassa Joyetech mod 18350 & penelope ja dna box mod + terminator tank
https://dl.dropbox.com/u/16564794/MiniMOD.jpg
Edit: Unohtu mainita, että tehot riittää tuossa hyvin matalaohmi setupeille penelopen kanssa ja mikään amppeerirajoitin ei ainakaan itsellä iske päälle n.1ohm-1.2ohm setupeilla.
Nyt on kyllä pakko tulla sanomaan että jollain on rillit huurussa tai sitten muuten vaan sokia mutta jos tosta saa nätin kombon niin minä olen kiinan keisari.
-
Vs: Joyetech Mod 18650/18350
Lainaus:
Alkuperäinen postaaja
Nisca
Nyt on kyllä pakko tulla sanomaan että jollain on rillit huurussa tai sitten muuten vaan sokia mutta jos tosta saa nätin kombon niin minä olen kiinan keisari.
Juu ei se ihan yks yhteen sovi, kun penelope näyttää olevan passelimpi jollekkin ohkaselle Piccololle. Joyemodiin passaa parhaiten joku leveä iso tankki.
Mut ilmeisesti Penan hyvä toiminta ja rakentelun helppous oikeuttaa sen mille modille tahansa :D ? Hommaan silti varmaan sen kloonin tohon nokalle, kiitti vinkistä :)
-
Vs: Joyetech Mod 18650/18350
Lainaus:
Alkuperäinen postaaja
Natsu
Mulla jää kyllä pientä rakoa akkuputken päätycäpin ja putken väliin Efestin 18650 IMR 2200mah akulla, mites sulle istuu toi akku putkeen?
AW IMR 200mAh :llla ei jää rakoa. Menee ihan suosiolla loppuun asti kierteet.
-
Vs: Joyetech Mod 18650/18350
Lainaus:
Alkuperäinen postaaja
Natsu
Mulla jää kyllä pientä rakoa akkuputken päätycäpin ja putken väliin Efestin 18650 IMR 2200mah akulla, mites sulle istuu toi akku putkeen?
Panasonicin CGR18650CH akulla ainakin menee päätycäp täysin kiinni isommalla putkella. Itseltä löytyy pari noita panaa. http://www.akkula.fi/Panasonic-CGR18650CH-2250-mAh
Lainaus:
Alkuperäinen postaaja
Nisca
Nyt on kyllä pakko tulla sanomaan että jollain on rillit huurussa tai sitten muuten vaan sokia mutta jos tosta saa nätin kombon niin minä olen kiinan keisari.
Myönnetään, että ei se nyt kuitenkaan nätti yhdistelmä oo. On kuitenkin toimivin omista tän hetken atoista mini modin kanssa ja ei näytä tatilta kuin esim. terminator kiinni :D Tuo päädyn halkaisija on 19mm, joten ainakin kaiffari kopio bt804 pitäs istua suoraan hyvin (halkaisija 18.87mm DV:n mukaan).
-
Vs: Joyetech Mod 18650/18350
Lainaus:
Alkuperäinen postaaja
Nisca
Nyt on kyllä pakko tulla sanomaan että jollain on rillit huurussa tai sitten muuten vaan sokia mutta jos tosta saa nätin kombon niin minä olen kiinan keisari.
Kauneus on katsojan silmissä. Tähän hintaan omasta mielestä todella käyttö kelpoinen ja käteen istuva Modi! Näppärämpi kun moni 100-200€uroon maksava patteri kotelo, joita löytyy ei se kallis ja Hypetetty ole aina itselle paras.
Vaikka esteettisyys ei olekkaan saumattomasti yhteen sopiva! Niin käyttö ja käteen/taskuun sopivaisuus on itsellä ykkönen, ja kun itsekkään ei esteettisesti niitä luojan kauneimpia ilmestyksiä ole niin sovitaan hyvin yhteen.( rosoisen miehekäs ja rajun sopivasti hellä? Sanovat mutta ei muistu mieleen kuka? 💃)
Ja härsikisti käytän välillä tuon nokassa Odya ja Spheroidia joka varmaan on jonkin mielestä häväistys
Niin kuin verkkarit ja kaulus paita! Höh ei mitään väliä! Rikkaat ne vaatteilla koreilee, niin kuin Kiinan Keisari :D
-
Vs: Joyetech Mod 18650/18350
Vielä kun tuosta tulisi 14500-modi. :esmoke: Niitä putkia on tuossa hintaluokassa muuten erittäin vähän. Jos hommaisi yhden varalaitteen varalaitteen varalaitteen varalaitteeksi, niin ei viitsisi kauheasti maksaa.
-
Joyetech Mod 18650/18350
Aikas pitkältä K-57 linjoilla. Automaatio siitä, että halpa on huono ei oikein päde joka putkessa eikä tämä edes ole halvimmasta päästä.
MODin ja eVicin control headit plus putkia on aikas voittajakombo.
Se tuossa tosin taitaa tulla, että reguloidulla saa olla tarkkana sen RBAn ohmien kanssa. Veikkaisin, että alle ohmissa iskee suojat kiinni.
-
Vs: Joyetech Mod 18650/18350
Lainaus:
Alkuperäinen postaaja
spirit222
Panasonicin CGR18650CH akulla ainakin menee päätycäp täysin kiinni isommalla putkella. Itseltä löytyy pari noita panaa.
http://www.akkula.fi/Panasonic-CGR18650CH-2250-mAh
Myönnetään, että ei se nyt kuitenkaan nätti yhdistelmä oo. On kuitenkin toimivin omista tän hetken atoista mini modin kanssa ja ei näytä tatilta kuin esim. terminator kiinni :D Tuo päädyn halkaisija on 19mm, joten ainakin kaiffari kopio bt804 pitäs istua suoraan hyvin (halkaisija 18.87mm DV:n mukaan).
Juu toi Panasonic on melkeimpä lyhin kaikista 18650-akuista. Mul on myös tuollainen Pana, mut se on Cree Xm-l led taskulamppu käytössä. Maailman lyhkäisin lamppu 18650 akulla ja tolla tehokkaalla uudella ledillä, Panasonic oli ainut joka sinne mahtui.
Noh ei tä pieni rako putkessa tällä Efestillä varmaan kai sit mitään haittaa...
-
Vs: Joyetech Mod 18650/18350
Lainaus:
Alkuperäinen postaaja
Troll from behind
Aikas pitkältä K-57 linjoilla. Automaatio siitä, että halpa on huono ei oikein päde joka putkessa eikä tämä edes ole halvimmasta päästä.
MODin ja eVicin control headit plus putkia on aikas voittajakombo.
Se tuossa tosin taitaa tulla, että reguloidulla saa olla tarkkana sen RBAn ohmien kanssa. Veikkaisin, että alle ohmissa iskee suojat kiinni.
Tulihan sieltä se vastaus reguloidun osalta :) Mahtaakohan suojat päteä reguloimattomana? Jos se virta silti kulkee saman piirin kautta.
-
Vs: Joyetech Mod 18650/18350
Jännitehävikki on reguloimattomana tässä Efestin 18350 akulla ja 1,5Ohmin vastuksella jotain +0,5V. Tuntuu myös tuo regulointi antautuvan pienemmillä vastuksilla.. :/ Tätä en saa mitattua tankkimittarilla, luultavasti jonkinmoinen pulssi kyseessä. Noaloxia tms tämä huutaa kierteisiin heti alkuun.
Otin tästä 18350 putken eviciin ja lykkäsin evicin putken ja akun tähän, Vivi nova 1,6Ohm setupilla nokkaan ja emännälle käyttöön. Tykkää kyllä. :D
-
Vs: Joyetech Mod 18650/18350
3. kerta kun toi nappi on jääny pohjaan höyryttelyn aikana. Pieni ihmetyksen tunne kun napista irrottaa ja silti tankin pöhinä jatkuu, napin valo palaa ja höyryä tulee.
Äkkiäkös sen räpläämällä nousemaan taas saa ja jatkettua höyryttelyjä, mut silti vähän laski se laatufiilis ja luotettavuus taas.
-
Vs: Joyetech Mod 18650/18350
Lainaus:
Alkuperäinen postaaja
Natsu
3. kerta kun toi nappi on jääny pohjaan höyryttelyn aikana. Pieni ihmetyksen tunne kun napista irrottaa ja silti tankin pöhinä jatkuu, napin valo palaa ja höyryä tulee.
Äkkiäkös sen räpläämällä nousemaan taas saa ja jatkettua höyryttelyjä, mut silti vähän laski se laatufiilis ja luotettavuus taas.
:o Itelle ei onneksi tuollasta oo sattunut vielä kertaakaan reilun 2.5 viikon omistuksen aikana, joten hyvä laatuvaikutelma on vieläkin kunnossa :D
Asiaan liittyen: Kyllä watti säätöä vaan kaipaa tähänkin, kun tottunut dna box modiin. Tämä ollut nyt yksistään pari päivää töissä mukana ja välillä olis tehnyt mieli laittaa vähän lisää hönkää. Eli kai se pitää laittaa bargain vapoursilta tilaukseen evic head, niin on se watti säätökin kunnossa ja modin koko pysyy sopivana mini modin putkella :D http://www.bargainvapour.com/JoyeTech_eVic_Control_Head_in_stock!/p1274299_8649233.aspx
edit: eVic head tilattu ja oli jopa halvempi mitä peleonilla. Tosin toimituskulut mukaan lukien menee varmaan samaan peleonin kanssa.
-
Vs: Joyetech Mod 18650/18350
Lainaus:
Alkuperäinen postaaja
spirit222
:o Itelle ei onneksi tuollasta oo sattunut vielä kertaakaan reilun 2.5 viikon omistuksen aikana, joten hyvä laatuvaikutelma on vieläkin kunnossa :D
Asiaan liittyen: Kyllä watti säätöä vaan kaipaa tähänkin, kun tottunut dna box modiin. Tämä ollut nyt yksistään pari päivää töissä mukana ja välillä olis tehnyt mieli laittaa vähän lisää hönkää. Eli kai se pitää laittaa bargain vapoursilta tilaukseen evic head, niin on se watti säätökin kunnossa ja modin koko pysyy sopivana mini modin putkella :D http://www.bargainvapour.com/JoyeTech_eVic_Control_Head_in_stock!/p1274299_8649233.aspx
edit: eVic head tilattu ja oli jopa halvempi mitä peleonilla. Tosin toimituskulut mukaan lukien menee varmaan samaan peleonin kanssa.
Höh, just ku tilasin sieltä 2x 100ml ja pari Hyper 4, tankkia. Pähkäilin pitkään et otanko mukaan tilaukseen ton headin, mut visalasku sanoo et ei käy.
Kyl mä tällä näin alkuun koitan pärjäillä näillä normitehoilla, on noita vv-laitteita sit muita tossa. Tätä varten olis tarkotus johonkin tankkiin rakentaa itse joku pienivastus-setuppi tulevaisuudessa ja pelata muutenkin pienillä ohmeilla. Täytyy kärkkyä se evic-headi sit joskus myöhemmin vaikka foorumeilta...
-
Vs: Joyetech Mod 18650/18350
Lainaus:
Alkuperäinen postaaja
spirit222
Asiaan liittyen: Kyllä watti säätöä vaan kaipaa tähänkin, kun tottunut dna box modiin. Tämä ollut nyt yksistään pari päivää töissä mukana ja välillä olis tehnyt mieli laittaa vähän lisää hönkää. Eli kai se pitää laittaa bargain vapoursilta tilaukseen evic head, niin on se watti säätökin kunnossa ja modin koko pysyy sopivana mini modin putkella :D http://www.bargainvapour.com/JoyeTech_eVic_Control_Head_in_stock!/p1274299_8649233.aspx
edit: eVic head tilattu ja oli jopa halvempi mitä peleonilla. Tosin toimituskulut mukaan lukien menee varmaan samaan peleonin kanssa.
Tuossahan Evicin contorl Hedissä hän ei tule usbi piuhaa mukana. Millainen sen pitäis olla?? Ajattelin kans itse tilata tuon Evicin hedin.
-
Vs: Joyetech Mod 18650/18350
Lainaus:
Alkuperäinen postaaja
pdz4
Tuossahan Evicin contorl Hedissä hän ei tule usbi piuhaa mukana. Millainen sen pitäis olla?? Ajattelin kans itse tilata tuon Evicin hedin.
Googlen mukaan micro usb ja noita ainakin itellä pyörii jo nurkat täynnä, kun tullut kännyköiden ja digikameroiden mukana.
-
Vs: Joyetech Mod 18650/18350
Saapu tänään postissa AGA-T+ ja pitihän sitä heti kokeilla joeymodilla tehdä hapettamaton mesh setuppi. Reguloimaton moodi päällä pulssia antamaan ja hyvin meni about 2min ja sain jo 1,5 kieppiä hehkumaan niinkuin pitää. Kuitenkin parin minsan jälkeen modin valot alkoi vilkkumaan ja ei anna tulittaa enää. Ei auta akun vaihto tai mikään eli rikki meni :-\
Eli kaikille tiedoksi, että joyetech modi ei kestä tuollaista rääkkiä kuten hapettamattoman mesh setupin teko. Onneksi varaosat on halpoja ja evic head on tulossa, niin ei jää nuo akkuputket käyttämättä. Eikai tässä auta, kuin alata ettimään mekaanista modia tuollasta rääkkiä varten :esmoke:
-
Vs: Joyetech Mod 18650/18350
Lainaus:
Alkuperäinen postaaja
spirit222
Saapu tänään postissa AGA-T+ ja pitihän sitä heti kokeilla joeymodilla tehdä hapettamaton mesh setuppi. Reguloimaton moodi päällä pulssia antamaan ja hyvin meni about 2min ja sain jo 1,5 kieppiä hehkumaan niinkuin pitää. Kuitenkin parin minsan jälkeen modin valot alkoi vilkkumaan ja ei anna tulittaa enää. Ei auta akun vaihto tai mikään eli rikki meni :-\
Eli kaikille tiedoksi, että joyetech modi ei kestä tuollaista rääkkiä kuten hapettamattoman mesh setupin teko. Onneksi varaosat on halpoja ja evic head on tulossa, niin ei jää nuo akkuputket käyttämättä. Eikai tässä auta, kuin alata ettimään mekaanista modia tuollasta rääkkiä varten :esmoke:
Mitään hapettamattomista tietävänä täytyy kysyä, et onko toi hapettamaton jotenkin raskaampi setuppi modille käsitellä? Pitäis koht Phoenix Picoon tehdä ihan normi esikois mesh-setuppi ja kokeilla sitä joyemodin kanssa.
-
Vs: Joyetech Mod 18650/18350
Lainaus:
Alkuperäinen postaaja
Natsu
Mitään hapettamattomista tietävänä täytyy kysyä, et onko toi hapettamaton jotenkin raskaampi setuppi modille käsitellä? Pitäis koht Phoenix Picoon tehdä ihan normi esikois mesh-setuppi ja kokeilla sitä joyemodin kanssa.
Hapettamattoman meshin teko on raskasta modille ja akulle, koska se on oikosulussa kunnes vastuslanka on hapettanut meshin. Eli tolla tyylillä setuppia tehdessä vastuslanka toimii "tohona" ja hapettaa langan alla olevan meshin. Amppeerit nousee sen verta korkealle, että oman joyemodin elektroniikasta jotain kärvähti. Valmiit mesh setupit kyllä toimii täysin joyemodissa, mutta tuo setupin valmistelu hapettamattomalla tyylillä on sille liikaa (normi tohotus ja nestepoltto tyyli toimii kyllä). Eli valmisteluun hapettamattomalla tyylillä olis paras joku täysin mekaaninen modi.
-
Vs: Joyetech Mod 18650/18350
Lainaus:
Alkuperäinen postaaja
spirit222
Hapettamattoman meshin teko on raskasta modille ja akulle, koska se on oikosulussa kunnes vastuslanka on hapettanut meshin. Eli tolla tyylillä setuppia tehdessä vastuslanka toimii "tohona" ja hapettaa langan alla olevan meshin. Amppeerit nousee sen verta korkealle, että oman joyemodin elektroniikasta jotain kärvähti. Valmiit mesh setupit kyllä toimii täysin joyemodissa, mutta tuo setupin valmistelu hapettamattomalla tyylillä on sille liikaa (normi tohotus ja nestepoltto tyyli toimii kyllä). Eli valmisteluun hapettamattomalla tyylillä olis paras joku täysin mekaaninen modi.
Ei kuulosta hirveen turvalliselta touhulta jos oikosulussa mennään :D Montakohan oikosulkua akku kestää kunnes elinikä on loppu? Vai onko tää hapettamaton mesh ihan hyväksi todettu asia?
-
Vs: Joyetech Mod 18650/18350
Hyvin se pelittää täysmekaanisella putkella; vastuslanka palaa poikki ennen kuin akulle käy mitään jos liian kauan antaa virtaa. ;)
Ensimmäistäkään akkua en ole saanut rikottua, eikä kapasiteetissakaan näytä mitään eroa olevan, vaikka yhdelläkin akulla olen tainnut 7 wickiä hapettaa (ilman latausta välissä siis) kun tuli tutuille pidettyä "koulutusta" tohottamattoman meshin käyttöönotossa. ;)
Tohottamaton (siis vastuslangan avulla hapetettu) meshi on kyllä hyväksi todettu ja nopea keino saada setuppi pelittämään kunnolla. Viimeisin kokeilu SDogiin litteällä vastuslangalla otti ~20 sek. hehkuttelua saada setuppi toimimaan oikein. 8) Ei ihan samoihin pääse tohon kanssa leikkimällä. :D
Edit. Mainitaan nyt vielä sen verran, että mekaanisen akkuputken kanssa näissä hommissa on sitten syytä käyttää suojaamattomia turvakemia-akkuja (=IMR tai vastaava), jottei suojapiiri puhalla peliä liian aikaisin poikki ja ettei vahingossakaan akku poksahda. ;)
-
Vs: Joyetech Mod 18650/18350
Lainaus:
Alkuperäinen postaaja
Charun
Hyvin se pelittää täysmekaanisella putkella; vastuslanka palaa poikki ennen kuin akulle käy mitään jos liian kauan antaa virtaa. ;)
Ensimmäistäkään akkua en ole saanut rikottua, eikä kapasiteetissakaan näytä mitään eroa olevan, vaikka yhdelläkin akulla olen tainnut 7 wickiä hapettaa (ilman latausta välissä siis) kun tuli tutuille pidettyä "koulutusta" tohottamattoman meshin käyttöönotossa. ;)
Tohottamaton (siis vastuslangan avulla hapetettu) meshi on kyllä hyväksi todettu ja nopea keino saada setuppi pelittämään kunnolla. Viimeisin kokeilu SDogiin litteällä vastuslangalla otti ~20 sek. hehkuttelua saada setuppi toimimaan oikein. 8) Ei ihan samoihin pääse tohon kanssa leikkimällä. :D
Edit. Mainitaan nyt vielä sen verran, että mekaanisen akkuputken kanssa näissä hommissa on sitten syytä käyttää suojaamattomia turvakemia-akkuja (=IMR tai vastaava), jottei suojapiiri puhalla peliä liian aikaisin poikki ja ettei vahingossakaan akku poksahda. ;)
Kiitti taas Charun kattavista neuvoista. Tarviiko tällaisiin setuppeihin atotankissa olla eristetty mesh-reikä? Eikä nestepolttoa tarvitse ollenkaan? Mul olis tossa Phoenix Pico odottamassa mut ei kiinnostais toholeikit. Onnistuuko tolla? Täysin mekaanisia putkia löytyy pari kappaletta.
-
Vs: Joyetech Mod 18650/18350
Ei vaadi eristettyä meshireikää, ottaa vaan yleensä pikkasen kauemmin se hapetus ja saattaa herkemmin polttaa vastuslangan poikki, mutta kun hyvin lyhyillä pulsseilla antaa alkuun virtaa, niin saa senkin kyllä tehtyä.. Ensimmäistä kertaa kun kokeilin eristämättömään reikään tehdä tohottamattoman setupin Arrowiin niin vain kerran kärähti lanka poikki. :D
Nestepolttoakaan ei kuulu tehdä, jos hapetus tehdään vastuksella. Pieni "sisäänajo" saattaa olla tarpeen, että alkaa wickaamaan riittävästi; SDogin viimeisimmällä setupilla (#500 meshistä umpinanen wicki) meni ~0.5-1ml että wickaus alko kunnolla pelittämään, mutta välillä taas wickaa heti alusta asti oikein (henkimaailman juttuja joihin luultavasti myös tähtien asento ja kuun kierto vaikuttaa).. :P
-
Vs: Joyetech Mod 18650/18350
Lainaus:
Alkuperäinen postaaja
Charun
Ei vaadi eristettyä meshireikää, ottaa vaan yleensä pikkasen kauemmin se hapetus ja saattaa herkemmin polttaa vastuslangan poikki, mutta kun hyvin lyhyillä pulsseilla antaa alkuun virtaa, niin saa senkin kyllä tehtyä.. Ensimmäistä kertaa kun kokeilin eristämättömään reikään tehdä tohottamattoman setupin Arrowiin niin vain kerran kärähti lanka poikki. :D
Nestepolttoakaan ei kuulu tehdä, jos hapetus tehdään vastuksella. Pieni "sisäänajo" saattaa olla tarpeen, että alkaa wickaamaan riittävästi; SDogin viimeisimmällä setupilla (#500 meshistä umpinanen wicki) meni ~0.5-1ml että wickaus alko kunnolla pelittämään, mutta välillä taas wickaa heti alusta asti oikein (henkimaailman juttuja joihin luultavasti myös tähtien asento ja kuun kierto vaikuttaa).. :P
Kiitos kiitos.
Unohtui viel kysyä et ajellaanko tämä setuppi käyttökuntoon ilman nesteitä vai nesteiden kanssa?
-
Vs: Joyetech Mod 18650/18350
Kun oot saanu hapetettua setupin kuntoon (eli kaikki kiepit hohkaa tasasesti ja hehkuminen etenee keskeltä laitoja kohti), niin nesteet vaan sisään ja höyryämään. ;)
Saattaa alkuun vaatia hieman lyhyempiä vetoja tai laitteen kallistelua, jos ei wickaa kunnolla, mutta tosiaan pienen käytön jälkeen yleensä lähtee wickauskin toimimaan. :)
Tällä viikolla luultavasti tekasen pikasen videokatsauksen Somnium V2:een ja samalla väännän tohottamattoman setupin; katsotaan, jos siitä jonkunlaisen tutoriaalin sais samalla aikaseks, vaikka melko yksinkertanen operaatio tuo kokonaisuudessaan on. ;)
-
Vs: Joyetech Mod 18650/18350
Lainaus:
Alkuperäinen postaaja
Charun
Kun oot saanu hapetettua setupin kuntoon (eli kaikki kiepit hohkaa tasasesti ja hehkuminen etenee keskeltä laitoja kohti), niin nesteet vaan sisään ja höyryämään. ;)
Saattaa alkuun vaatia hieman lyhyempiä vetoja tai laitteen kallistelua, jos ei wickaa kunnolla, mutta tosiaan pienen käytön jälkeen yleensä lähtee wickauskin toimimaan. :)
Tällä viikolla luultavasti tekasen pikasen videokatsauksen Somnium V2:een ja samalla väännän tohottamattoman setupin; katsotaan, jos siitä jonkunlaisen tutoriaalin sais samalla aikaseks, vaikka melko yksinkertanen operaatio tuo kokonaisuudessaan on. ;)
Hyvä hyvä!
Katselen sellaisen videon mielelläni :)
-
Vs: Joyetech Mod 18650/18350
Juu-u, niin ne asiat kehittyy. Itsekkin heitin perjantaina ekan tohottoman setupin. Pico (eli eristämätön wick-reikä) ja hyvin workkii, jopa paremmin kun tohotettu ja nestepoltettu. Hommatkaa sitä awg-28 kantahalia, olisko ollut 50feet 12 dollaria posteineen. Ja taitaa olla jopa parasta A1-luokkaa. Ei ole kertaakaan palanut poikki, 4 kieppiä picossa on 0.8 ohmia ollut kerta toisensa jälkeen. Paksuus siis 0.32mm tuolla langalla.
Sitten takaisin aiheeseen, en muutenkaan suosittele käyttämään mesh-setuppia tälläisten ego-tyylisten laitteiden kanssa. Kaksi egon akkua mennyt roskiin näiden takia. Toinen toimi hetken hyvin ja sitten simahti. Koitin mekaanisella, niin oli lanka päässyt vetämään oikkarin ihan itsellään vaikka oli aiemmin toiminut hyvin.
edittiä, kiitos Esmokelle
-
Vs: Joyetech Mod 18650/18350
Lainaus:
Alkuperäinen postaaja
muti88
Juu-u, niin ne asiat kehittyy. Itsekkin heitin perjantaina ekan tohottoman setupin. Pico (eli eristämätön wick-reikä) ja hyvin workkii, jopa paremmin kun tohotettu ja nestepoltettu. Hommatkaa sitä awg-36 kantahalia, olisko ollut 50feet 12 dollaria posteineen. Ja taitaa olla jopa parasta A1-luokkaa. Ei ole kertaakaan palanut poikki, 4 kieppiä picossa on 0.8 ohmia ollut kerta toisensa jälkeen. Paksuus siis 0.3mm tuolla langalla.
Sitten takaisin aiheeseen, en muutenkaan suosittele käyttämään mesh-setuppia tälläisten ego-tyylisten laitteiden kanssa. Kaksi egon akkua mennyt roskiin näiden takia. Toinen toimi hetken hyvin ja sitten simahti. Koitin mekaanisella, niin oli lanka päässyt vetämään oikkarin ihan itsellään vaikka oli aiemmin toiminut hyvin.
Eikai nyt kuitenkaan AWG 36? 4 kieppiä 0.8ohmia kuulostaa AWG28:lta, eli 0.32mm langalta.