Vs: Phoenix / Bully Rebuildable Atomizer
Tänään tipahti postista Esmoken phoenix/bully/mikälie ato ja innoissani aloin väkertämään uutta coilia pienten maistiaisten jälkeen. Coili toimii mutta höyry jäi johonkin ja kurkkutuntuma on aivan liian järkky.
Jotain helppiä tässä nyt tarvitsisi että pääsisi oikeasti nauttimaan höyryistä ensimmäisellä tee-se-itse atolla.
Vs: Phoenix / Bully Rebuildable Atomizer
Lainaus:
Alkuperäinen postaaja
Saunis
Tänään tipahti postista Esmoken phoenix/bully/mikälie ato ja innoissani aloin väkertämään uutta coilia pienten maistiaisten jälkeen. Coili toimii mutta höyry jäi johonkin ja kurkkutuntuma on aivan liian järkky.
Jotain helppiä tässä nyt tarvitsisi että pääsisi oikeasti nauttimaan höyryistä ensimmäisellä tee-se-itse atolla.
Työnnäppä sitä coilia hieman alaspäin, jos ei auta, niin nosta ylöspäin :) Tarkista myös, että reikä menee coilin kohdalle.
Vs: Phoenix / Bully Rebuildable Atomizer
Lainaus:
Alkuperäinen postaaja
Saunis
Tänään tipahti postista Esmoken phoenix/bully/mikälie ato ja innoissani aloin väkertämään uutta coilia pienten maistiaisten jälkeen. Coili toimii mutta höyry jäi johonkin ja kurkkutuntuma on aivan liian järkky.
Jotain helppiä tässä nyt tarvitsisi että pääsisi oikeasti nauttimaan höyryistä ensimmäisellä tee-se-itse atolla.
Lisää tiivisterengas capin ja kierteiden alapään väliin, jolloin ilmareikä jää ylemmäs.. ja silti pysyy tiiviinä.
Sitten wicki sille puolelle, joka tulee lähemmäs ilmareikää ja ilmareikä osoittamaan suoraan vastuslankoihin.
Coiliin ~2 Ohm tavoitteeksi ja voltteja nostelet 3,5 alkaen ylöspäin kunnes riittää.
Kaikki nuo stepit jo läpikäyty tässä ketjussa muistaakseni aikaisemminkin.
Vs: Phoenix / Bully Rebuildable Atomizer
Ircissä jo asiaa puitiin mutta ei tullu ongelmaan ratkasua.
Elikkäs, phoenix tuli kans eilen, alkuperäsellä coililla toimi. Nyt oon koittanu väännellä ite coilia, värkkeinä 3mm imulanka ja 0.20 A-1 kanthal, oon koittanu 3/4 - 7/7 coilia mutta jokaisella lyö egosta suojapiirin päälle, oikkaria ei ota mistään ja phoenixin navoista mitattuna antaa resistanssiksi 1,9-2,1 ohmia, mittalaitteen johtimien resistanssi otettu huomioon ja mittarin testasin vielä 2ohmin kangerilla jolloin tulokseksi tuli tasan 2ohmia. Kangerin karto toimii kyllä eli akussakaan ei liene vikaa.
Keksiskö joku vielä mikä tossa vois olla vikana, itellä ainaki ideat loppu.
Phoenix / Bully Rebuildable Atomizer
Napa painuu liian alas tai ottaa kiinni Bullyssä liittimen reunaan?
Kokeile adapteria väliin.
Vs: Phoenix / Bully Rebuildable Atomizer
Lainaus:
Alkuperäinen postaaja
Troll from behind
Napa painuu liian alas tai ottaa kiinni Bullyssä liittimen reunaan?
Kokeile adapteria väliin.
Tota ehdotettiin ircissäkin mutta ku alkuperäsellä coililla toimi. Eikä mulla kyllä adapteriakaan oo millä koittaa, mut vois ton varmuuden vuoksi testailla pienillä johdon pätkillä.
e. lainaus mukaan ku sivu vaihtu ja testasin johdolla, ei toiminu siltikään, kangeri toimi samalla johdon pätkällä.
Vs: Phoenix / Bully Rebuildable Atomizer
Paina sitä plus-navan ruuvia alaspäin, jolloin keskinapa painuu myös. Toi menee laitteessa oikariin, jos kiertää vähänkään tiukalle.
Itse ajattelin turauttaa pikaliimaa väliin, kun niin naurettavan kevyesti tuo keskinapa painuu..
Ootko muuten testannu toisella akulla?
Vs: Phoenix / Bully Rebuildable Atomizer
Ei auttanu ruuvin painelu ja ei oo ku toi yks ego-akku niin en pysty testaileen.
Vs: Phoenix / Bully Rebuildable Atomizer
Nonii ihan ok tämä köyhän miehen chalise toimii, vaikka vähän on kikkailua tuon keskinavan kanssa kun se painuu niin helposti sisään. Erittäin hellästi saa kiristää.
Höyry on aika röyhkeää, mutta pitää kokeille noita edella mainittuja.
http://img849.imageshack.us/img849/4...0905210752.jpg
Ato paloina.
http://img705.imageshack.us/img705/6...0905201401.jpg
http://img827.imageshack.us/img827/2...0905201431.jpg
Vs: Phoenix / Bully Rebuildable Atomizer
Ootko ilman kuoria kokeillu käyttää, jos vaikka näkys jotain epäilyttävää? Ilmeisesti oot useemmalla coililla ja eri tavoin käärityillä kokeillut?
Vs: Phoenix / Bully Rebuildable Atomizer
Ilman kuoria, kuorilla, 3/4 - 7/7 coileilla, jossain vaiheessa joku coili toimi kuivana mutta nestettä ku laitto niin taas löi suojaa päälle.
Vs: Phoenix / Bully Rebuildable Atomizer
Huomasin tuossa että bullyni ilmarööri on ihan liian alhaalla :(
sattui nököttämään esmoken phoenixin vieressä ja osui silmään. Ihmettelinkin jo vähän aikaa miksi se ei pelitä kunnolla. Tarkemmin katselin niin ilmareikä jää neste "kipon" reunan alapuolelle. Ei mikään ihme ettei vedä kunnolla.
http://dl.dropbox.com/u/96755546/IMG...906_163856.jpg
Näkyy tuo kipon reunakin tuossa bullyssä. (oikeen puoleinen)
Kopio dremelillä suhasin reikää ylemmäs. Rumahan siitä tuli mutta höyryä riittää :esmoke:
Vs: Phoenix / Bully Rebuildable Atomizer
Oho! Mulla ei onneksi ihan noin pahasti päällekäin ollut; ~20% aukosta peitti, mutta pikkasen viilalla otin kupin reunaa matalammaksi tuolta kohdalta, niin johan potkii. :D
Tuossa Esmoken versiossa on muuten melko iso tuo kuppi ja o-rengaskin löytyy juuresta. Myös reikä menee juuri coilin kohdalle, mikäli kuoren kiristää "tappiin saakka" (jos siis tekee coilin toiselle laidalle), kun jossain videoarvostelussa noita seikkoja arvosteltiin.
Tiedä sitten onko nää jotain uudempaa erää, vaiko mahdollisesti jonkun toisen valmistajan tekeleitä.
Edit. Voisin kyllä väittää, että näissä on paras hinta/laatusuhde uudelleenrakennettavien atojen joukossa. :)
Tullut myös huomattua, että silica-wickisessä atossa on ainakin omaan makuun huomattavasti miellyttävämpi maku/tuntuma; tuossa Atomaisterissa on jotenkin kuivempi ja kireämpi höyry, kun taas tästä saa taas märemmät ja pehmeämmät höyryt. Kurkkutuntumassa kyllä meshi vie selvästi.
Pitänee kokeilla seuraavaksi lykätä Atomaisteriin silica-wicki, kun uuden setupin vääntää. :)
Vs: Phoenix / Bully Rebuildable Atomizer
Noniin. Nyt alko tulla höyryä ja makua. Laskin coilia alemmas ja lisäsin o-renkaan niin osu ilmareikä kohilleen. Vielä kun suurennan aavistuksen tuota ilmareikää niin alkaa olla muokkailut tehtynä. Kiitoksia avusta :-)
Vs: Phoenix / Bully Rebuildable Atomizer
Lainaus:
Alkuperäinen postaaja
Raipe
Mitenkäs ton keskinavan saa ehjänä irti? Ajattelin, josko tonne sais o-renkaan tms. viriteltyä, ettei painus niin helposti sisään.. :-\
Phoenix / Bully Rebuildable Atomizer
Se on ihan kelluva, tossa kupissa vain on yläpäässä semmonen rinkula reunan päällä. Tämä siis mini-sw
Vs: Phoenix / Bully Rebuildable Atomizer
Lainaus:
Alkuperäinen postaaja
Charun
Mitenkäs ton keskinavan saa ehjänä irti? Ajattelin, josko tonne sais o-renkaan tms. viriteltyä, ettei painus niin helposti sisään.. :-\
Mulla lähti irti poratessa. Jäin kiinni poranterään. Kyllä sen kangottamalla pitäisi tulla jos löydät vaan tarpeeksi pienen työkalun jonka saa tuonne väliin.
Eipä tuossa o-rengas taida auttaa, koska nuo sisukalut kuitenkin työntyy ylös navan mukana. Tuo puoliympyrä pitäisi saada runkoon jotenkin kiinni, muttei liimaakaan viitsisi käyttää. Ei tiedä mitä sinne mehuihin irtoaa
Vs: Phoenix / Bully Rebuildable Atomizer
Ok. Kokeilin jo pienellä ruuvarillakammeta ja terävillä pinseteillä kaivella, mutta ei liikkunu mihinkään.. Pitänee käyttää enemmän voimaa. :D
Edit. Kyllähän se näköjään voimalla lähtee (jopa ehjänä), eli pelkkä painesovitus tuossa on.
Kokeilin nyt laittaa tipan liimaa tuon navan ja rungon väliin, josko pysyis paremmin paikallaan. :)
Vs: Phoenix / Bully Rebuildable Atomizer
Lainaus:
Alkuperäinen postaaja
Charun
Ok. Kokeilin jo pienellä ruuvarillakammeta ja terävillä pinseteillä kaivella, mutta ei liikkunu mihinkään.. Pitänee käyttää enemmän voimaa. :D
Edit. Kyllähän se näköjään voimalla lähtee (jopa ehjänä), eli pelkkä painesovitus tuossa on.
Kokeilin nyt laittaa tipan liimaa tuon navan ja rungon väliin, josko pysyis paremmin paikallaan. :)
e-shotin phoenix saa helpsti osiin ilman että menee rikki (ja on tarkoituskin kuten e-shotin videossa näytetään). Bullyja olen tuhonnut pari kun olen yrittänyt . Tässä vissiin yks ero alkuperäisessä ja kopiossa.
Vs: Phoenix / Bully Rebuildable Atomizer
Kyllähän tuosta Esmoken versiostakin melko helposti tuo keskinasta lähti, kun sai vahvistuksen sille, ettei ollut esim. kierteillä kiinni ja uskalsi kammeta ruuvarilla, myös takaisin meni oikein hyvin. :)
Näytti auttavan tuo pikaliimatippa tuonne plusnavan ja rungon väliin; ei ole vielä painunut yhtään. ;)