Eihän tuossa tarvis kuin pikku pätkä putkea olla pohjassa niin laite imuroisi jousiosaston pohjalta aina nesteet takaisin käyttöön :laugh:
Printable View
Eihän tuossa tarvis kuin pikku pätkä putkea olla pohjassa niin laite imuroisi jousiosaston pohjalta aina nesteet takaisin käyttöön :laugh:
Itsellä tuossa keskireiässä pieni meshituubi lisäämässä imuvastusta. Voishan tuohon kokeilla laittaa vähän pidemmänkin meshin pätkänkin, jonka sitten vääntäisi sieltä jousen välistä sinne kupin pohjalle (josko tuossa nyt sitten kapillaari-ilmiö riittäisi kumoamaan painovoiman - ja voi toki voi olla että imuvastuskin menee aika tiukaksi...
Ensimmäinen oma setup tehty!
.
3mm silica 0.20 kanthal ja ohmeja 2.6 aikas paljon, mutta vehje pelittää. Höyryt mahtavat, makua saisi olla ehkä hieman enemmän. Toki syy voi olla nesteessä itsessään.
Imuvastus olematon omaan makuuni, huolimatta siitä, että laitoin pienen meshistä käärityn rullan keskiputken sisään. Pohjaan muodostunutta nestettä en vielä ole uskaltanut tarkastaa.
Hyvä peli! Tästä on hyvä alkaa omien setuppien värkkäily.
Kiitos sib77 videosta!
Kannattaa sitten tosiaan olla tarkka niitten posti tappien kanssa.
tuossa kun putsasin tankkia tietysti lavuaarin ääressä niin toinen tapeista putosi viemäriin.. jees....
onneksi tossa tuli paketissa vara tapit siinä pussukassa mukana.
hyvillä aromeilla ja höyryillä on hintansa tässä vekottimessa...
nesteen kulutus on jotain aivan käsittämätöntä, ja nyt tuo rupesi sitten taas liruttelemaan ilmareiästä nesteitä pihalle...
nyt riitti tälle päivälle tuon kanssa näpertely ja nappaan tutun ja turvallisen boge tankki yhdistelmän käyttöön. ;)
Perkele. Eka tankillinen meni hienosti, ei dryhittejä eikä vuotoja. Sitten kun täytin uudestaan, niin ei wickaa enää ollenkaan. Yks imaisu ja sitten vaan dryhittiä... Vuotoja ei kyllä edelleenkään, eli avasin pohjacapin ja aivan kuiva. Varmaankin johtuu tuosta Gorillan jähmydestä sitten.
Mikähän tolle nyt tuli kun ei wickaa enää, vaikka eka tankillinen meni hienosti??? Ekan ilmaisun saa normimakuista ja sitten vaan palanutta...
Tippa vettä Gorillan sekaan antamaan notkeutta?
*Pssst* likalukko ;)Lainaus:
Alkuperäinen postaaja Darra
@sib77:
mistä saisi tuota punottua silicaa mitä sulla on tossa videossa?
on kuin kengän nauhaa :)
@juzzi9:
nii-i... tyhmästä päästä kärsii koko kayfun klooni... :D
Ecigwizardilta... mutta 3mm on loppu.
Ainakin eCW:llä on 1/1.5/2mm.
Sitten on GG silica 1.5/2/3/3.5mm http://www.e-smokeguru.gr/en/supplies/wires-wick/
Muista en tiedä
Loistavasti höyryää!
Hieman pukkasin meshrullaa syvemmälle niin vastusta tuli riittävästi. Myöskään pohjaan ei ole ainakaan vielä vuotoa. Täyttelen tankkia heti kun nään nestepinnan hieman vajuneen, ei ainakaan vielä ole tullut dryhittejä tai vuoto- ongelmaa.
Kertokaapas kun en koskaan ole orkkista kokeillut, niin onko tää nyt lähellekään esikuvansa kaltainen?
Voikos se ato olla vieläkin parempi, noin toimuuvuusnäkökulmasta? Muotoilu ja ulkonäkö seikkat on toki
sitten eri juttu.
Espanjasta myös löytyy:
http://www.finnvape.com/product/470/silica-wick-1m
Onko kukaan leikkinyt tuon kontaktiruuvin kireyden kanssa? ECF:n treadeissä mainintoja että pitäisi olla pikkusen löysällä jotta vikkais, mutta jos on liian löysällä niin sitten vuotaa (http://www.e-cigarette-forum.com/for...04-tank-4.html).
Ite pistin juuri tilaukseen tuolta kreikkalaisesta puljusta metrin 2mm silicaa ja neljä metriä 3mm.
Hintaa tuli 3€ posteineen 10,50€, eli metriltä se 2,10€ mutta olikin vain pikkutilaus, katsoo jos on laadukasta niin sitten kerralla se 25m tilaus, apaut hetkeksi riittäisi :esmoke:
Aikas kallista. Eikä tuo näytä olevan punottua eli siis letitettyä. Oikea sana siis tälle silicalle on tuo letitetty kaiketi.
Jeh
Kun juissi oli vähentynyt alle puoleen tankkiin, alkoi laite pukkaamaan dry hittiä. avasin yläkäppiä n. puolikierrosta jolloin lisää nestettä siirtyi langalle. Näin pari kertaa tekemällä sain höyryteltyä tankin melkein tyhjäksi.
Ei mullakaan. Päädyin sitten kokeilemaan tuota edellisellä sivulla mainittua täyttöreikää tankin reunassa. Pohdin aluksi jopa kannen reunan läpi poraamista, mutta reitti olisi sisätiivisteen takia vähän ahdas, joten mieluummin ryssin vaihdettavan tankin kuin sen kannen. (Ja nyt kun noita täyttötapoja alkoi löytymään niin parempi näin, Nova vaihtotankki menee tilaukseen. :op) Tällä sain tankin niin täyteen nestettä että ilmaa jäi vain pinjansiemenen kokoinen kupla... Niin täytenä tuntu olevan parempi tehdä käämi yhden 3mm ja yhden 1mm silican ympärille ja jättää 1mm silicat lyhyen matkaa nesteensyöttöloviin. Vähän enemmän se tosin tarvitsi ilmaa että alkoi toimimaan kunnolla, mutta oli silti käyttökelpoinen kun imulangat oli jo märkinä.
Mutta on tämä kyllä höyryntuotoltaan ja nikotiinin toimitukseltaan parasta mitä olen kokeillut. Imuvastusta on helppo lisätä, kondensaationeste ei valu suuhun kuten Vivi Nova Minissä joskus, ja kierteetkin ihan hyvin tehty. Laitoin kellariin kierroksen vanulappua keräämään vuotoja. Märkä on, näyttää olevan tarpeen. Sitten kun alan hifistelemään teen ilmanottoreiälle jatkoputken tuonne sisälle ettei valumat pääse pihalle.
Kyllähän tuossakin luulis ihan hyvän määrän nestettä pääsevän suoraan atolle tuon keskiputken kautta. Mutta pitääpä kokeilla.
Mulla imi 80% VG nesteen ihan hyvin tyhjäksi asti. Onkohan sulla silicat varmasti konehuoneen pohjalla? Ja käämi hyvin kiinni silicassa?