www.3fvape.com

Original Wismec Reuleaux RX GEN3 Dual 230W TC VW Variable Wattage Box Mod $40.99
Wismec introduces a new member of Reuleaux series, Reuleaux RX GEN3 Dual, which is more compact and portable than previous box mods. Powered by dual replaceable 18650 batteries (not included), the GEN3 Dual is able to output 230W and has 2A quick charge capability. The minimum resistance supported is from 0.05 to 1.5ohm (TC) and 0.1 to 3.5ohm (VW).
http://www.3fvape.com/192155-home_de...-2-x-18650.jpg
Original Hotcig G177 177W TC VW Variable Wattage Box Mod $38.99
The Original Hotcig G177 Box Mod is a versatile regulated mod with durable zinc alloy chassis. Equipped with HM chipset, the output wattage is able to be varied from 1 to 177W with dual 18650 batteries (not included). It also features 0.005S instant firing speed, RGB breathing light, spring loaded 510 connection and 2A USB charging.This item also has many color to choose.
http://www.3fvape.com/192165-home_de...-2-x-18650.jpg
Predator Mini Hybrid Mechanical Mod Clone $19.99
The Predator Mini Mechanical Mod Clone is made from brass and powered by 1 x 18350 battery (not included). The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 6 vent holes on the top of the mod. It is a portable mech mod that cloud chasers chase for.This item also has many color to choose.
http://www.3fvape.com/192183-home_de...-1-x-18350.jpg
YFTK Karma RDA Rebuildable Dripping Atomizer Clone w/ BF Pin $17.99
The YFTK Karma RDA Clone is constructed from 316 stainless steel in 18mm diameter. The build deck has dual post for single coil build. The air accesses the chamber via bottom airhole and travels up to the bottom of the coil. The top cap is made of Delrin.
The RDA comes with bottom feeder pin and decorative ring.
http://www.3fvape.com/192211-home_de...m-diameter.jpg
YFTK GSL RTA Rebuildable Tank Atomizer Clone $23.99
The YFTK GSL RTA Clone is constructed from 316 stainless steel with 23mm diameter. The tank can hold 5ml of e-juice. The deck comes with dual post design for single coil build. The cotton slot is large for more cotton on the both sides. The airflow can be adjusted via the bottom AFC ring. It is a great tank for MTL vaping.
http://www.3fvape.com/191972-home_de...m-diameter.jpg
Kindbright FL RTA Rebuildable Tank Atomizer Clone with BF Pin $14.99
The Kindbright FL RTA Clone is constructed from 316 stainless steel in 24mm diameter. It features dual post deck for single coil and middle side adjustable airflow. The deck has notches for easy installation of the coil. The tank is large and allows to take about 30 puffs per drip.
This RTA comes with bottom feeder pin.This item also has many color to choose.
http://www.3fvape.com/192199-home_de...m-diameter.jpg
Original Wismec Reuleaux RX GEN3 Dual 230W TC VW Box Mod + GNOME King Tank Kit $61.99
The Original Wismec Reuleaux RX GEN3 Dual Kit consists of Reuleaux RX GEN3 Dual Mod and GNOME King Tank.This item also has many color to choose.
Mod:
Wismec introduces a new member of Reuleaux series, Reuleaux RX GEN3 Dual, which is more compact and portable than previous box mods. Powered by dual replaceable 18650 batteries (not included), the GEN3 Dual is able to output 230W and has 2A quick charge capability. The minimum resistance supported is from 0.05 to 1.5ohm (TC) and 0.1 to 3.5ohm (VW).
Tank:
The GNOME King is a 26mm tank with 5.8ml juice capacity. Featuring the unique crown molding shape and perfect color scheme, the gorgeous GNOME King atomizer that utilizes the updated WM01 coil for intense flavor can perfectly combine with RX GEN3 Dual in terms of appearance and performance.
http://www.3fvape.com/192129-home_de...18650-58ml.jpg
Kratos Mechanical Mod Clone + Zeus RDA Clone Kit $21.99
The Kratos Mech Clone Kit consists of Kratos Mechanical Mod Clone and Zeus RDA Clone.This item also has many color to choose.
Mod:
The Kratos Mechanical Mod Clone is constructed from brass and POM. It is 25mm diameter. Powered by single 18650 battery (not included), this mod will bring you massive cloud and dense flavor.
RDA:
The Zeus RDA Clone is a 24mm RDA with velocity style dual post build deck, which is very easy to build coils. The RDA comes with adjustable side airflow and bottom airflow system, giving you great flavor and massive vapor. PEI drip tip is included.
http://www.3fvape.com/192173-home_de...-1-x-18650.jpg
Vortecon Kinetic Desk Toy Clone Spinner EDC Fidget Toy $8.99
The Vortecon Kinetic Desk Toy Clone is constructed from stainless steel. The spinner is a small spinning device designed to keep your hands busy and your mind focused. It is pocket sized and can be spun on the desk by using your hand to rapidly spin it from small continuous strikes. Great for people with Fidgety hands, ADHD, Anxiety & OCD sufferers. The bearing is R188 and made from stainless steel, with size of 12.7 x 6.35mm (diameter x height).This item also has many color to choose.
http://www.3fvape.com/192214-home_de...88-bearing.jpg

Original Serisvape Golden Armor RDA Rebuildable Dripping Atomizer $20.99
The Serisvape Golden Armor RDA is a 26mm RDA featuring fully gold plated base, PEI drip tip and top cap, and innovative angled airflow system. The dual post clamp system makes building easier as the clamp piece will automatically adjust when you loosen or tighten the screw. The angled airflow system allows more airflow to hit the coil for better flavor and massive cloud.
http://www.3fvape.com/192363-home_de...m-diameter.jpg
Original GeekVape Loop RDA Rebuildable Dripping Atomizer with BF Pin Original Price $29.90,Now Only $20.99
The Original GeekVape Loop RDA is the first leak-proof RDA with surround bottom airflow system. The innovative W style postless build deck is raised and provide more space for the juice well. Whats more, it will not cause juice leaking when refilling because of the deck and beveled airslots. The air accesses the internal via side airslots and hit the bottom of coils. The structure of the deck can surround the coils well and enhance the flavor.
This RDA comes with bottom feeder pin.
http://www.3fvape.com/192378-home_de...m-diameter.jpg
Entheon RDA Rebuildable Dripping Atomizer Clone with BF Pin $9.59
The Entheon RDA Rebuildable Dripping Atomizer is constructed from stainless steel in 22mm diameter. The Innovative dual post style deck and coil clamping system makes coil building effortless. The airflow is adjustable by the two airslots on the side of cap.
This RDA comes with bottom feeder pin.


The black piece can be placed into the hole at the base
http://www.3fvape.com/192384-home_de...m-diameter.jpg
Kratos Mechanical Mod Clone + Zeus RDA Clone Kit $22.99
The Kratos Mech Kit Clone consists of Kratos Mechanical Mod Clone and Zeus RDA Clone.
Mod:
The Kratos Mechanical Mod Clone is constructed from brass and POM. It is 25mm diameter. Powered by single 18650 battery (not included), this mod will bring you massive cloud and dense flavor.
RDA:
The Zeus RDA Clone is a 24mm RDA with velocity style dual post build deck, which is very easy to build coils. The RDA comes with adjustable side airflow and bottom airflow system, giving you great flavor and massive vapor. PEI drip tip is included.
http://www.3fvape.com/192336-home_de...-1-x-18650.jpg
Original Serisvape Closers Squonk Mechanical Box Mod + RDA Kit $31.89
The Original Serisvape Closers Squonk Kit consists of Serisvape Closers Box Mod and Closers RDA.
Mod:
The Serisvape Closers Squonk Box Mod is made from aluminum with stainless steel 510 connector. The mod is powered by single 18650 / 20700 battery (not included). The squeeze bottle can hold 7ml of e-juice. The fire button can be locked to avoid mis-fire.
RDA:
The Serisvape Closers RDA is a 26mm RDA with innovative angled airflow system, allowing more airflow to hit the coil for better flavor and massive cloud. The Delrin drip tip can protect your mouth from heat.
http://www.3fvape.com/192356-home_de...m-diameter.jpg
Original Marvec Replacement Coil Head for Priest AIO 90W Starter Kit $2.99
The replacement coil head features 0.2ohm resistance and is suitable for authentic Marvec Priest AIO 90W Starter Kit.
One piece will be shipped.
http://www.3fvape.com/192305-home_de...kit-02-ohm.jpg
Original Marvec Replacement Coil Head for Priest AIO 90W Starter Kit(5 PCS) $10.99
The replacement coil head features 0.2ohm resistance and is suitable for authentic Marvec Priest AIO 90W Starter Kit.
This product comes with 5 CPS in 1 pack.
http://www.3fvape.com/192306-home_de...-ohm-5-pcs.jpg
Original Vapjoy Tortuosity Coil Ni80 Heating Wire $7.99
The Original Vapjoy Tortuosity Coil is made from Ni80 wires and features 0.22ohm resistance, 3mm I.D (inner diameter), 6 wraps, 23GA. It is a good choice for DIY coil building.
This product comes with 10 PCS in 1 pack.
http://www.3fvape.com/192313-home_de...ohm-10-pcs.jpg
Original Serisvape Miracle Mechanical Mod Protector $14.99
The Original Serisvape Miracle Mechanical Mod Protector is designed for unregulated box / tube mod without protection function. It features battery reverse protection, low voltage warning, short circuit protection, time-out function, LED battery life indictor. This protector is 24mm in diameter.
Working voltage at 3.25~4.2V; Supporting resistance at 0.2~3ohm.
http://www.3fvape.com/192316-home_de...m-diameter.jpg
Original Wick 'N' Vape Cotton Bacon Prime for E-Cigarettes $4.99
The Original Wick 'N' Vape Cotton Bacon Prime features 33% faster absorption and easier separation. It has the world's most cutting edge, cleanest and easy to use cotton wick. It is designed with large fibers for low ohm builds and will leave you with minimal dry hits. This cotton provides more capacity and clean pure flavor!
http://www.3fvape.com/192328-home_de...035-oz-10g.jpg

Original U-Yo Stacked Hybrid Mechanical Mod $32.99
The Original U-Yo Mechanical Mod is a stackable mod that is compatible with signle 18350 or 18650 battery (not included). The mod comes with hybrid connection for direct output. The fire button is activated by magnets. This item also has many color to choose.
http://www.3fvape.com/192530-home_de...8350-18650.jpg
Original U-Yo Stacked Hybrid Mechanical Mod with Extension Tube $50.99
The Original U-Yo Mechanical Mod is a stackable mod that is compatible with signle 18350 or 18650 battery (not included). The mod comes with hybrid connection for direct output. The fire button is activated by magnets. Extension tubes is included (detachable), with which you can put 2 or 3 18650 batteries in series. This item also has many color to choose.
http://www.3fvape.com/192561-home_de...-3-x-18650.jpg
Original Vapor Storm Subverter 200W TC VW Variable Wattage Box Mod $36.59
The Original Vapor Storm Subverter Box Mod, powered by dual 18650 batteries (not included), can reach maximum wattage to 200W. The side panels has many geometrical cut-outs and becomes aesthetic pattern. The mod comes with a 0.96 inch colorful display and big fire button. The resistance allowed is from 0.05 to 3ohm (VW), 0.05 to 1ohm (TC). This item also has many color to choose.
http://www.3fvape.com/192500-home_de...-2-x-18650.jpg
Shenray PantheonS Hybrid Mechanical Mod Clone $24.99
The Shenray PantheonS Mechanical Mod Clone is a 24mm tube mod with hybrid connection. The tube has many cut-outs and forms regular pattern. It is powered by single 18650 or 20700 battery (not included). The 18650 battery adapter is frosted. The fire button is activated by spring. This item also has many color to choose.
http://www.3fvape.com/192508-home_de...m-diameter.jpg
Original U-Yo Stacked Hybrid Mechanical Mod $32.99
The Original U-Yo Mechanical Mod is a stackable mod that is compatible with signle 18350 or 18650 battery (not included). The mod comes with hybrid connection for direct output. The fire button is activated by magnets. This item also has many color to choose.
http://www.3fvape.com/192530-home_de...8350-18650.jpg
Original U-Yo Stacked Hybrid Mechanical Mod with Extension Tube $50.99
The Original U-Yo Mechanical Mod is a stackable mod that is compatible with signle 18350 or 18650 battery (not included). The mod comes with hybrid connection for direct output. The fire button is activated by magnets. Extension tubes is included (detachable), with which you can put 2 or 3 18650 batteries in series. This item also has many color to choose.
http://www.3fvape.com/192561-home_de...-3-x-18650.jpg
Shenray PantheonS Hybrid Mechanical Mod Clone $24.99
The Shenray PantheonS Mechanical Mod is a 24mm tube mod with hybrid connection. The tube has many cut-outs and forms regular pattern. It is powered by single 18650 or 20700 battery (not included). The 18650 battery adapter is frosted. The fire button is activated by spring. This item also has many color to choose.
http://www.3fvape.com/192508-home_de...m-diameter.jpg
Original NCR 256W TC VW Variable Wattage Box Mod Original Price $47.99,Now Only $38.99
The Original NCR Mod is a sleek and ergonomically designed mod, which can reach 256W with triple 18650 batteries (not included). The NCR 256W Mod comes with multiple output modes, including NCR mode, VW, Ni-200, Ti-01, SS-316, Bypass and PTC (curve) mode. This versatile mod will definitely give you fantastic experience.
http://www.3fvape.com/192490-home_de...-3-x-18650.jpg
Saint Seiya RDA Rebuildable Dripping Atomizer Clone $13.99
The Saint Seiyas RDA is a 24mm RDA made out of stainless steel Clone. The build deck features dual post design, 4 slots to place cotton, and 5mm deep juice well. The airflow enters from the bottom airslots and travels up to the bottom of coils. The cap has 2 deep-carved lines on it. PEI drip tip is included. This item also has many color to choose.
http://www.3fvape.com/192583-home_de...m-diameter.jpg
Original Vandy Vape Lit RDA Rebuildable Dripping Atomizer with BF Pin Original Price $33.99,Now Only $24.99
The Original Vandy Vape Lit RDA is a 24mm RDA with multifunctional base and Rhombus airflow control. The clamp post allows you to build coils in 3 different ways: Horizontal, Mesh, and Vertical. The Rhombus airflow control provides you with 2 different airflow configurations: linear airflow or dot airflow. Besides, there are 3 drip tips included for Lit RDA: resin, Delrin, and Ultem. Not to mention the squonk function, it is also available. The VandyVape Lit RDA is going to be lit this time!This item also has many color to choose.
This RDA comes with bottom feeder pin.
http://www.3fvape.com/192616-home_de...m-diameter.jpg
YFTK Replacement Top Cap for Karma RDA Clone $5.99
The replacement top cap is made out of PC and is suitable for YFTK Karma RDA.
http://www.3fvape.com/192487-home_de...a-white-pc.jpg

Original Voopoo Drag 157W TC VW Variable Wattage Box Mod Original Price $53.99,Now only $40.99
The Original Voopoo Drag 157W TC VW Variable Wattage Box Mod is made from zinc alloy and powered by 2 x 18650 batteries (not included). It features Super Mode, which will be activated automatically under 130W wattage. Also it features fastest fire speed, 0.025s only.
http://www.3fvape.com/192636-home_de...-2-x-18650.jpg
Phantom X V2 Hybrid Mechanical Mod Clone $24.99
The Phantom X V2 Mechanical Mod Clone is constructed from copper with hybrid connection. It is powered by single 18650 battery (not included). The fire button is activated by spring.
http://www.3fvape.com/192643-home_de...-1-x-18650.jpg
Original Dovpo LQT RDA Rebuildable Dripping Atomizer with BF Pin $22.99
The Original Dovpo LQT RDA is a 24mm RDA with gold plated dual post. Using flathead grub screws, it is easy to get coils built and fixed. The Ultem drip tip can prevent juice spitting and condensation. With the direct side airflow, the flavor in this RDA is dense and solid.
This RDA comes with bottom feeder pin. This item also has many colors to choose
http://www.3fvape.com/192659-home_de...m-diameter.jpg
Hadaly RDA Rebuildable Dripping Atomizer Clone with BF Pin $8.99
The Hadaly RDA Clone is an innovative RDA for you flavor chasers out there. It is constructed from PMMA (cap) and 316 stainless steel (base) in 22mm diameter. This RDA is amazing but if you looking for massive clouds this one is not for you. It is best suited for single coil builds.
This RDA comes with bottom feeder pin. This item also has many colors to choose.
http://www.3fvape.com/192684-home_de...m-diameter.jpg
Original Serisvape Cavalry Hybrid Mechanical Mod + RDA Kit $31.89
The Original Serisvape Cavalry Mech Mod Kit consists of Cavalry Mechanical Mod and Cavalry RDA.
Mod:
The Serisvape Cavalry Mechanical Mod is constructed from brass with hybrid connection. It is powered by single 18650 battery (not included). It comes with two options to activate you fire button, magnet and spring.
RDA:
The Serisvape Cavalry RDA is constructed from brass (cap) and stainless steel (base) in 25mm diameter. The build deck comes with dual post and the T shape post has 4 terminals, which allow you to get coils fixed separately. The side airflow hit the coil directly with two sizes of airholes. Ultem drip tip and Delrin doc tip are included.
http://www.3fvape.com/192651-home_de...m-diameter.jpg
Original NCR Replacement Wafer Heater for NCR RDA Original Price $17.99,Now only $11.99
The Wafer Heater is designed for NCR RDA / NCR 256W Mod Kit. It supports 600,000 times cycle-uses with self-cleaning function. It is very easy to install and use.
One piece will be shipped.
http://www.3fvape.com/192629-home_de...-rda-white.jpg
Original Wismec Replacement 810 Drip Tip for Tobhino BF RDA $2.99
The Original Wismec replacement 810 drip tip is made from resin with 11.5mm height. It is suitable for Tobhino BF RDA / Luxotic Kit.
It is also suitable for Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA. This item also has many colors to choose
http://www.3fvape.com/192632-home_de...esin-115mm.jpg

SXK NarDA RDA Clone Rebuildable Dripping Atomizer with BF Pin Original Price $15.00 ,Now only $12.99
Please Note: This product will be shipped around March 31, 2018 (ETA, not guaranteed). The final shipping date depends on the manufacturer. We will try to get it delivered as soon as we can.
The product images and information are provided by the manufacturer, for reference only. The final refers to the manufacturer's actual product.
The SXK NarDA style RDA is a rebuildable dripping atomizer with 22mm diameter. It is made out of 316 stainless steel. Coming with dual-post design, it is easy to build. SXK NarDA style RDA is a nice single coil RDA that will provide intense flavor and massive cloud. 510 POM drip tip is included.
This RDA comes with bottom feeder pin.
http://www.3fvape.com/192922-home_de...m-diameter.jpg
510 Replacement Drip Tip for RDA / RTA / Sub Ohm Tank $1.99
The replacement 510 drip tip is made from resin with 15mm height. It is suitable for all atomizers that fit 510 drip tip.
One piece will be shipped (random color). More options than what's on the image.
http://www.3fvape.com/192899-home_de...resin-15mm.jpg
810 Replacement Drip Tip for 528 Goon / Kennedy / Reload RDA $1.99
The 810 drip tip is made from resin with 12.5mm height. It is suitable for Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA.
One piece will be shipped (random color). More options than what's on the image.
http://www.3fvape.com/192903-home_de...esin-125mm.jpg
810 Replacement Drip Tip for TFV8 / TFV12 Tank / 528 Goon / Kennedy / Reload RDA $1.99
The 810 drip tip is made from resin with 15mm height. It is suitable for TFV8 Tank, TFV8 Big Baby Tank, TFV12 Tank, TFV12 Prince Tank, Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA.
One piece will be shipped (random color). More options than what's on the image. This item also other specification.
http://www.3fvape.com/192907-home_de...resin-15mm.jpg
YFTK Replacement Top Cap for Short Cranked RDA Clone $5.99
The replacement top cap is made out of PEEK and is suitable for YFTK Short Cranked RDA Clone. This item also has other colors and material.
http://www.3fvape.com/192919-home_de...black-peek.jpg
YFTK Short Cranked RDA Clone Rebuildable Dripping Atomizer with BF Pin $18.99
The YFTK Short Cranked RDA Clone is a 22mm RDA made from 316 stainless steel. The build deck is wide and has two terminals to build single coil. The airflow enters from the side air holes and hit the coil directly. The cap comes with triple-groove design.
This RDA comes with bottom feeder pin.
Please note: there is no drip tip included, the RDA is compatible with 510 drip tip.
http://www.3fvape.com/192930-home_de...m-diameter.jpg

Original Vapor Storm Raptor 120W Squonk Mechanical Box Mod $21.99
The original Vapor Storm Raptor Squonk Box Mod is an unregulated mod with chip protection and LED indicators. Powered by single 18650, 20700 or 21700 battery (not included), the mod can reach max output at 120W. It supports 0.05ohm super low resistance. The squeeze bottle has 5ml capacity. This item also has other colors to choose.
http://www.3fvape.com/192944-home_de...-21700-5ml.jpg
Kurba Hybrid Mechanical Box Mod Clone $11.99
The Kurba Mechanical Box Mod Clone has Delrin chassis and copper 510 connector. It is powered by single 18650 battery (not included). The body is ergonomically designed, which will give you comfortable hand feel. This item has other colors, other suppliers can choose.
http://www.3fvape.com/192953-home_de...-1-x-18650.jpg
Original Vapor Storm Raptor 120W Squonk Mechanical Box Mod + RDA Kit $34.99
The original Vapor Storm Raptor Squonk Kit consists of Vapor Storm Raptor Box Mod and Raptor RDA.This RDA Kit also has other colors to choose.
Mod:
The original Vapor Storm Raptor Squonk Box Mod is an unregulated mod with chip protection and LED indicators. Powered by single 18650, 20700 or 21700 battery (not included), the mod can reach max output at 120W. It supports 0.05ohm super low resistance. The squeeze bottle has 5ml capacity.
RDA:
The Vapor Storm Raptor RDA is constructed from PEI (drip tip, cap) and stainless steel (base). Together with Raptor Box Mod, it will bring you fantastic vaping experience.
http://www.3fvape.com/192937-home_de...-21700-5ml.jpg

Original Marvec Magic Wand 90W Tube Mod $23.99
The Marvec Magic Wand Tube Mod is an unregulated mod with built-in chip, which allows it to fire at 90W full power with single 18650 battery (not included). It can be used safely with multiple protections, including short circuit protection, anti-reverse connection, over temperature protection, battery overcharge protection, discharge protection and smoking prevention timeout. This mod also has other color and Materials to choose. And it can Compatible with different types of batteries.
http://www.3fvape.com/193145-home_de...-1-x-18650.jpg
Predator Mini Hybrid Mechanical Mod Clone $17.99
The Predator Mini Mechanical Mod Clone is made from brass and powered by single 18350 battery (not included). The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 6 vent holes on the top of the mod. It is a portable mech mod that cloud chasers chase for. This mod also has other color and Materials to choose.
http://www.3fvape.com/193153-home_de...-1-x-18350.jpg
Kindbright Warhead RDA Rebuildable Dripping Atomizer Clone with BF Pin $18.99
The Kindbright Warhead RDA Clone has a beast size of 30mm and is constructed from 316 stainless steel. The build deck comes with triple post design for dual coil building. The top cap has a wide airslot and five airholes on both sides for multiple airflow configuration. The beveled Delrin drip tip can prevent the juice spitting out.
This RDA comes with bottom feeder pin. and it also has other color and Materials to choose.
http://www.3fvape.com/193165-home_de...m-diameter.jpg
Original Marvec Magic Wand 90W Tube Mod + Sub Ohm Tank Kit $44.99
The original Marvec Magic Wand Starter Kit consists of Marvec Magic Wand Mod and Marvec Magic Wand Tank. This kit also has other color and Materials to choose. And it can Compatible with different types of batteries.
Mod:
The Marvec Magic Wand Tube Mod is an unregulated mod with built-in chip, which allows it to fire at 90W full power with single 18650 battery (not included). It can be used safely with multiple protections.
Tank:
The Marvec Magic Wand Tank is a 25mm tank which adopts 0.2ohm and 0.4ohm coil heads, performing well at 90W output. Coming with bottom airflow system, it will bring you massive cloud and great flavor.
This kit will be shipped with random color. More color than what's on the image.
http://www.3fvape.com/193098-home_de...-18650-2ml.jpg

Entheon RDA Rebuildable Dripping Atomizer Clone with BF Pin + Hadeon Cap + Spare Drip Tip $11.99
The Entheon RDA Rebuildable Dripping Atomizer Clone is constructed from stainless steel in 22mm diameter. The Innovative dual post style deck and coil clamping system makes coil building effortless. The airflow is adjustable by the airslots on the side of cap.
This RDA comes with bottom feeder pin. Hadeon Cap and 3 Spare Drip Tips are included in this kit. This item also has other Hadeon Cap colors to choose.
http://www.3fvape.com/193331-home_de...m-diameter.jpg
Original Vapefly Wormhole RDA Rebuildable Dripping Atomizer with BF Pin $35.99
The orginal Vapefly Wormhole RDA is a 24mm RDA which features amazing airflow for cloud chaser. The air enters side and bottom air slots, surrounding the coil to produce outstanding flavor and huge cloud. Besides, the side and bottom airflow can be controlled separately by adjusting the cap. And there are 2 kinds of airflow adjusting clamps, which allows you to use single coil or dual coils. The juice well is very deep and is very friendly to squonking. Compatible with 510 and 810 drip tip.
This RDA comes with bottom feeder pin. And it also has other colors to choose.
http://www.3fvape.com/193340-home_de...m-diameter.jpg
SXK BB 70W All-in-One Box Mod Kit Clone $85.00
The SXK BB Box Mod Kit Clone is constructed from aluminum with an all-in-one design. This mod comes with Comes with Kanger Subtank RBA Coil, Kanger OCC coil adaptor, Nautilus coil adaptor.
http://www.3fvape.com/193309-home_de...-1-x-18650.jpg
Original Coil Father Kanthal A1 Pre-built Coil Heating Wire $3.99
The Original Coil Father Pre-built Coils Heating Wire is made from Kanthal A1 wires and features 0.6ohm, 24GA. This heating wire will be a good vaping choice for DIY.
This product comes with 50 PCS in 1 pack. And it also suitable for other types of Resistance and Gauge.
http://www.3fvape.com/193317-home_de...4ga-50-pcs.jpg
Original Coil Father Ni80 Pre-built Coil Heating Wire $3.99
The Original Coil Father Pre-built Coils Heating Wire is made from Ni80 wires and features 0.36ohm, 22GA. This heating wire will be a good vaping choice for DIY.
This product comes with 50 PCS in 1 pack. And it also suitable for other types of Resistance and Gauge.
http://www.3fvape.com/193320-home_de...2ga-50-pcs.jpg
Original Coil Father SS316 Pre-built Coil Heating Wire $3.99
The Original Coil Father Pre-built Coils Heating Wire is made from SS316 wires and features 0.29ohm, 24GA. This heating wire will be a good vaping choice for DIY.
This product comes with 50 PCS in 1 pack. And it also suitable for other types of Resistance and Gauge.
http://www.3fvape.com/193324-home_de...4ga-50-pcs.jpg
Original Demon Killer Muscle Cotton II for RDA / RTA / RDTA $3.59
The Original Demon Killer Muscle Cotton II is medical level degreasing cotton, coming with longer fiber and better absorbability. It is a good choice to wick on your favorite RDA, RTA, RDTA.
http://www.3fvape.com/193327-home_de...rdta-white.jpg

Original ThinkVape Finder DNA250C TC VW Variable Wattage Box Mod $117.99
The original ThinkVape Finder DNA250C Box Mod adopts the most up-to-date DNA250C chip from Evolv, providing stable and high performance for your vaping. It is powered by triple 18650 batteries (not included). The chassis of Finder DNA250C is made out of high quality zinc alloy and comes with leather battery cover. With ergonomic design, you can grab it in hand comfortably. This item also has other colors to choose.
http://www.3fvape.com/193515-home_de...-250c-chip.jpg
Predator Mini Hybrid Mechanical Mod Clone $18.99
The Predator Mini Mechanical Mod Clone is made from brass and powered by single 18350 battery (not included). The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 6 vent holes on the top of the mod. It is a portable mech mod that cloud chasers chase for. This item also has other colors to choose.
http://www.3fvape.com/193531-home_de...-1-x-18350.jpg
Complyfe Takeover Hybrid Mechanical Mod Clone $19.99
The Complyfe Takeover Mechanical Mod Clone is made out of brass with hybrid connection. It is powered by single 18650 battery (not included). There are several venting holes around the top side for safe use. The bottom fire button is activated by magnets. This item also has other materials and colors to choose.
http://www.3fvape.com/193536-home_de...-1-x-18650.jpg
510 Replacement Drip Tip for RDA / RTA / Sub Ohm Tank Atomizer $1.99
The replacement 510 drip tip is made from POM with 8mm height. It is suitable for all atomizers that fit 510 drip tip. This item also has other materials and colors to choose.
http://www.3fvape.com/193484-home_de...te-pom-8mm.jpg
510 Replacement Drip Tip + 22mm Decorative Ring Kit for RDA / RTA / Sub Ohm Tank Atomizer $3.99
The replacement 510 drip tip and decorative ring are made from POM. The drip tip is suitable for all atomizers that fit 510 drip tip. The decorative ring comes with 22mm inner diameter. This item also has other materials and colors to choose.
The decorative ring is suitable for 22mm atomizers.
1 drip tip and 1 decorative ring will be shipped.
http://www.3fvape.com/193497-home_de...-white-pom.jpg
Replacement Top Cap for Complyfe Battle RDA Clone $4.99
The replacement top cap is made from stainless steel. It is suitable for Complyfe Battle RDA Clone. This item also has other materials and colors to choose.
http://www.3fvape.com/193505-home_de...less-steel.jpg

Original ThinkVape Finder DNA250C TC VW Variable Wattage Box Mod $117.99
The original ThinkVape Finder DNA250C Box Mod adopts the most up-to-date DNA250C chip from Evolv, providing stable and high performance for your vaping. It is powered by triple 18650 batteries (not included). The chassis of Finder DNA250C is made out of high quality zinc alloy and comes with leather battery cover. With ergonomic design, you can grab it in hand comfortably. This item also has other colors to choose.
http://www.3fvape.com/193515-home_de...-250c-chip.jpg
Predator Mini Hybrid Mechanical Mod Clone $18.99
The Predator Mini Mechanical Mod Clone is made from brass and powered by single 18350 battery (not included). The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 6 vent holes on the top of the mod. It is a portable mech mod that cloud chasers chase for.
http://www.3fvape.com/193531-home_de...-1-x-18350.jpg
Complyfe Takeover Hybrid Mechanical Mod Clone $19.99
The Complyfe Takeover Mechanical Mod Clone is made out of brass with hybrid connection. It is powered by single 18650 battery (not included). There are several venting holes around the top side for safe use. The bottom fire button is activated by magnets. This item also has other colors to choose.
http://www.3fvape.com/193536-home_de...-1-x-18650.jpg
Original IJOY Diamond PD270 234W TC VW Variable Wattage Box Mod $48.99
The IJOY Diamond is a dual 20700 battery mod with diamond design, which makes it look angular and stylish. Powered by dual 20700 or 18650 batteries with adapter (batteries not included), the mod is capable of delivering power up to 234W. It can support atomizer resistance from 0.05 to 3.0ohm. This item also has other colors to choose.
http://www.3fvape.com/193545-home_de...8650-20700.jpg
Original IJOY Diamond PD270 234W TC VW Variable Wattage Box Mod with 20700 Batteries $59.99
The IJOY Diamond is a dual 20700 battery mod with diamond design, which makes it look angular and stylish. Powered by dual 20700 or 18650 batteries with adapter (20700 batteries included), the mod is capable of delivering power up to 234W. It can support atomizer resistance from 0.05 to 3.0ohm.
http://www.3fvape.com/193557-home_de...8650-20700.jpg
Kindbright Chanupa Stacked Hybrid Mechanical Mod Clone $35.99
The Kindbright Chanupa Mechanical Mod Clone is constructed from brass. The tube mod has many carved patterns on it. It is able to be stacked with extra extension tube, which allows it to use dual 18650 batteries; When it is not stacked, single 18650 battery can make this mod work (batteries not included). The fire button is activated by spring. This item also has other colors to choose.
http://www.3fvape.com/193561-home_de...-2-x-18650.jpg
Original Vapefly 510 Replacement Drip Tip for Galaxies MTL RDA $2.99
The original Vapefly replacement 510 drip tip is made from POM with 16mm height. It is suitable for Vapefly Galaxies MTL RDA, and can be compatible with all atomizers that fit 510 drip tip. This item also has other colors to choose.
http://www.3fvape.com/193539-home_de...k-pom-16mm.jpg

Original Paradigm Modz Octarine V2 RDA Rebuildable Dripping Atomizer $14.99
The original Paradigm Modz Octarine V2 RDA is a 22mm RDA that features dual post build deck and multiple airflow system. The cap has dual side airslots and signle bottom airslot on each side. The internal of the cap is domed for concentrated flavor. The 510 PEI drip tip can prevent juice spitting back. This item also has other colors to choose.
http://www.3fvape.com/194042-home_de...m-diameter.jpg
Original 528 Custom Titanium Goon RDA Rebuildable Dripping Atomizer $69.99
The original 528 Custom Titanium Goon 1.5 RDA Clone is made out of 100% Titanium. The bridges and clamps are silver plated. Blue anodized screws, bridges, clamps are included. It is a great RDA for cloud chasing.
http://www.3fvape.com/194054-home_de...m-diameter.jpg
Original Ovns Saber 400mAh All-in-one Starter Kit $14.99
The Ovns Saber Starter Kit is a tiny kit that is suitable for beginner and features ultra-portable system, which is extremely portable to carry. Coming with a cartridge pod with 1.8ml juice capacity and built-in 400mAh battery, you can carry it anywhere you go. With the auto-vaping design, you can just take a puff without pressing any button or adjusting any setting. This item also has other colors to choose.
http://www.3fvape.com/193856-home_de...8ml-18-ohm.jpg
Original Ovns SEGO 650mAh All-in-one Starter Kit $9.79
The original Ovns SEGO Starter Kit is one of the best AIO device for vape beginners. With portable pen-style design, you can carry it anywhere. It features built-in 650mAh rechargeable battery and 1.5ml e-liquid juice capacity. The tank with LED indicator is very cool, which can show the real time status while vaping. Besides, Ovns SEGO Starter Kit has multiple protections to guarantee safe using. This item also has other colors to choose.
http://www.3fvape.com/193868-home_de...5ml-15-ohm.jpg
Original VapeOnly Malle AIO 180mAh All-in-one Starter Kit $14.99
The original VapeOnly Malle Starter Kit is a newly designed pen-style MTL device with simple design and delicate appearance. With a 180mAh built-in battery and a 0.7ml pod atomizer, Malle AIO Kit will bring you convenient and comfortable vaping. This item also has other colors to choose.
http://www.3fvape.com/193873-home_de...07ml-2-ohm.jpg
Original VapeOnly vPen 390mAh All-in-one Starter Kit $20.99
The original VapeOnly vPen Kit is a portable device that supports both e-juice and nicotine capsule for double enjoyment. And the pen cap can prevent dust when carrying. The 390mAh vPen battery is an automatic battery with a LED and a USB port on bottom. You can start vaping by a single drag. This item also has other colors to choose.
http://www.3fvape.com/193875-home_de...1ml-13-ohm.jpg
Original VapeOnly Malle S Lite 180mAh Starter Kit $30.99
The original VapeOnly Malle S Lite is a super portable device with convenient operation and good handle. It comes with 2 e-cigarettes with 180mAh battery each set to provide you all day need. Moreover, it is automatic and do not need to press any button when vaping. Together with the convenient charging box and easy bottom refilling atomizer, it is absolutely a good choice for daily use. This item also has other colors to choose.
http://www.3fvape.com/193896-home_de...8ml-15-ohm.jpg
Original VapeOnly New Malle PCC 2250mAh Starter Kit with 180mAh E-cigs $42.99
The original VapeOnly New Malle PCC Kit consists of a 2250mAh PCC and 180mAh battery with each set to provide you with all the vaping you need all day long. It is also automatic so you do not need to press any button when vaping. Together with the convenient charging box and easy bottom refilling atomizer. This item also has other colors to choose.
http://www.3fvape.com/193908-home_de...8ml-15-ohm.jpg
Original VapeOnly vPipe 3 e-Pipe Starter Kit with 18350 Battery $89.99
The original VapeOnly vPipe 3 is a high end e-cig pipe device made from rosewood that combines traditional pipe functions with new revolutions. The vPipe body has a LED light indicator and blinks from up to down when using. And the included BVC atomizer has a 1.2ml tank capacity and 0.7ohm resistance, which can be filled easily with all detachable structure. Luxurious design and superior technologies make vPipe III a piece of art work.
2 x 18350 batteries included.
http://www.3fvape.com/193920-home_de...2ml-07-ohm.jpg
Original Smoant S8 370mAh Pod Starter Kit $19.99
The original Smoant S8 Pod Starter Kit is designed for vape beginner. The Smoant S8 features streamline appearance for better grip. Powered by built-in 370mAh battery, the S8 will satisfy your needs for simple puffs. The cartridge has 2ml of juice capacity and is refillable. The air-activated switch makes the S8 pretty easy to vape.
http://www.3fvape.com/193927-home_de...2ml-13-ohm.jpg
Original Joyetech Exceed Edge 650mAh Starter Kit $20.79
Being a pod system while you can still change the coil heads as you like, the Joyetech EXCEED Edge is ergonomically designed, inspired by the sports car. It is meant to offer you a delectable and pure flavor using with the fine EX 1.2ohm head for mouth-to-lung enthusiasts. Meanwhile, it is compatible with high nicotine and nicotine salts. The EXCEED Edge is such a tiny and sleek device that fits you perfectly not just for starters but also advanced vapers. This item also has other colors to choose.
http://www.3fvape.com/193937-home_de...2ml-12-ohm.jpg
Original Vaporesso Cascade One Plus 3000mAh Mod + Cascade Baby Tank Kit $37.99
The original Vaporesso Cascade One Plus Kit consists of Cascade One Plus Mod and Cascade Baby Tank.
Vaporesso Cascade One Plus Kit Powered by built-in 3000mAh battery, provides a long-lasting vaping time to you. The Cascade Baby features top refill and unique safety lock mechanism for easy filling and anti-leakage. It has an innovative isolation structural design that separates coil and juice chamber, allowing consistent, intense flavor at every puff also reducing lower leakage and dry hit potential. The tank adopts innovative GT Mech coils too. This item also has other colors to choose.
http://www.3fvape.com/193981-home_de...ml-018-ohm.jpg
Original Vaporesso Cascade One Plus 3000mAh Mod + Cascade Baby SE Tank Kit $40.99
The original Vaporesso Cascade One Plus SE Kit consists of Cascade One Plus Mod and Cascade Baby SE Tank.
Vaporesso Cascade One Plus SE Kit Powered by built-in 3000mAh battery, provides a long-lasting vaping time to you. The Cascade Baby SE features top refill and unique safety lock mechanism for easy filling and anti-leakage. It has an innovative isolation structural design that separates coil and juice chamber, allowing consistent, intense flavor at every puff also reducing lower leakage and dry hit potential. The tank adopts innovative GT Mech coils too. This item also has other colors to choose.
http://www.3fvape.com/194026-home_de...ml-018-ohm.jpg
Original Ovns Replacement Pod Cartridge for Saber Starter Kit $7.99
The replacement pod cartridge features 1.8ml juice capacity and 1.8ohm resistance. It is suitable for authentic Ovns Saber Starter Kit.
This product comes with 5 PCS in 1 pack.
http://www.3fvape.com/193854-home_de...-ohm-5-pcs.jpg

Original Wismec Luxotic NC 250W Box Mod $46.99
As a new product designed by Jaybo, it is powered by dual 20700 or 18650 batteries with 250W maximum output. With the Resin and Brushed Stainless Steel body, this mod has stunning appearance. Besides, NC mod has a particular switch button for different vaping experience. This item also has other colors to choose.
http://www.3fvape.com/194235-home_de...8650-20700.jpg
Original Lost Vape Paranormal DNA250C 200W TC VW Box Mod $149.00
The original Lost Vape Paranormal DNA250C Box Mod adopts the most advanced chip from Evolv, the DNA250C chip. Paranormal DNA250C Mod features Replay mode, which allows vapers to select their own perfect vape and save to replay it over and over. Powered by dual 18650 batteries (not included), the Paranormal can be varied from 1 to 200W. The On-the-Go function of DNA250C allows Paranormal DNA250C to act like a power bank.
This one is silver frame version. For the color combination, please refer to the last image. This item also has other Color pattern to match.
http://www.3fvape.com/194241-home_de...-2-x-18650.jpg
YFTK M-Atty RDA Rebuildable Dripping Atomizer Clone with BF Pin $14.69
The YFTK M-Atty RDA Clone is constructed from 316 stainless steel. This RDA supports dual and single airflow. And the deck of this RDA is designed around common vertical & horizontal builds.
This RDA comes with bottom feeder pin.
http://www.3fvape.com/194433-home_de...m-diameter.jpg
YFTK Paravozz RDTA Rebuildable Dripping Tank Atomizer Clone $23.99
The YFTK Paravozz RDTA Clone is constructed from 316 stainless steel. It features dual post build deck for single coil build and with large capacity. The tank tube and drip tip are made out of PEI.
http://www.3fvape.com/194435-home_de...m-diameter.jpg
YFTK Daytona RDA Rebuildable Dripping Atomizer Clone with BF Pin $14.99
The YFTK Daytona RDA Clone is constructed from 316 stainless steel in 22mm diameter. The build deck features dual post design for single or dual coil builds. The RDA comes with side airflow system. PEEK airflow blocker is included for single coil build. POM wide bore drip tip is included.
This RDA comes with bottom feeder pin.
http://www.3fvape.com/194436-home_de...m-diameter.jpg
Original Kanger Uboat 550mAh Starter Kit $16.89
The original Kanger Uboat Starter Kit is a tiny vape device that consists of Kanger Uboat 550mAh battery and Kanger Uboat cartridge. The cartridge features 2ml juice capacity and 1.5ohm resistance. It is very portable for you to carry it everywhere.
http://www.3fvape.com/194135-home_de...2ml-15-ohm.jpg
Original OVNS Vape-X 500mAh Pod Starter Kit $21.99
The original OVNS Vape-X Pod Starter Kit comes with the built-in 500mAh battery and 1.5ml capacity pods. The intelligent LED indicator that indicate the battery remaining power and different battery voltage. Power will be saved with the help of sleep mode. Besides, there is the bypass mode to guarantee the safe vaping. This item also has other colors to choose.
http://www.3fvape.com/194143-home_de...5ml-18-ohm.jpg
Original Eleaf iCard 650mAh 15W Starter Kit $19.79
The original Eleaf iCard Starter Kit is powered by built-in 650mAh battery. As a newest start kit which is very simple to use, you just need to fill in the juice and click the fire key, then you can enjoy taking puffs. The iCard kit contains a 2ml cartridge and all-new ID 1.2ohm coil head. The protective mouth cover on the top prevents dust getting inside. Its portable size and easy operation is very friendly to beginner. This item also has other colors to choose.
http://www.3fvape.com/194155-home_de...2ml-12-ohm.jpg
Original Wismec Luxotic NC 250W Box Mod + Guillotine V2 RDA Kit $65.99
The original Wismec Luxotic NC Dual 20700 Kit consits of Wismec Luxotic NC Box Mod and Guillotine V2 RDA. This item also has other colors to choose.
Mod:
As a new product designed by Jaybo, it is powered by dual 20700 or 18650 batteries with 250W maximum output. With the Resin and Brushed Stainless Steel body, this mod has stunning appearance. Besides, NC mod has a particular switch button for different vaping experience.
RDA:
The Guillotine V2 RDA is a 24mm RDA adopts dual post deck and has large space for easy coils building. It comes with resin 810 drip tips for large vapors and BF Pin to make it compatible with squonk mod.
http://www.3fvape.com/194221-home_de...8650-20700.jpg
YFTK Replacement Top Cap for Daytona RDA Clone $5.99
The replacement top cap is made out of PEI and is suitable for YFTK Daytona RDA Clone.
http://www.3fvape.com/194129-home_de...yellow-pei.jpg
Original Kanger Uboat USB Charger for Uboat Starter Kit $3.99
The original Kanger Uboat USB Charger is used to charge the Kanger Uboat Starter Kit. By charging Uboat for 30 minutes, you can vape it for a whole day.
http://www.3fvape.com/194130-home_de...-kit-black.jpg
Original Kanger Uboat Pod Cartridge for Uboat Starter Kit $7.99
The original Kanger Uboat Pod Cartridge is used for the Kanger Uboat Starter Kit. It features 2ml juice capacity and 1.5ohm resistance.
This product comes with 3 PCS in 1 pack.
http://www.3fvape.com/194132-home_de...-ohm-3-pcs.jpg

Original Hugo Vapor Rader Mage 218W TC VW Variable Wattage Box Mod $49.99
The Original Hugo Vapor Rader Mage Box Mod adopts new chipset and with dual 18650 batteries (not included), it can reach 218W maximum output. The lightest and hardest design makes the mod a durable and functional mod for great vaping experience. This item also has other colors to choose.
http://www.3fvape.com/194509-home_de...-2-x-18650.jpg
Ulton 502 RDA Rebuildable Dripping Atomizer Clone with BF Pin $9.59
The Ulton 502 RDA Clone is a 25mm RDA with unique post and clamp design which allows you to DIY various coil builds in vertical or horizontal way. It is compatible with 810 wide bore drip tip (POM drip tip incldued).
This RDA comes with bottom feeder pin.
http://www.3fvape.com/194514-home_de...m-diameter.jpg
Original CoilART DPRO 133 Premium Kit with DPRO RDA Original Price $69.99, Now Only $39.99
The CoilART DPRO 133 Premium Kit consists of CoilART DPRO 133 mod and DPRO RDA. This item also has other colors to choose.


Mod:
The CoilART DPRO 133 mod can be regarded as a mech mod with regular protection. Powered by dual 18650 batteries in parallel, the output is straight and powerful without any delay. This mod can also be powered by only one battery (battery not included). With short-circuit protection and reverse polarity protection, it is much safer to use it. With the aluminum anodized body, it feels comfortable in hands and it is also very lightweight.
RDA:
The Stylish DPRO RDA from CoilART is a 24mm diameter RDA with creative postless deck. The length extended airflow system creates awesome flavor. The build deck features 24K gold plated postless deck with 3mm juice well. It is easy for both single coil and dual coil. The Goon style ultem drip tip has inner groove, which can prevent e-juice coming from the bottom to mouth.


Please note: this kit is Chinese version, but only the package and user manual are in Chinese.
http://www.3fvape.com/194443-home_de...m-diameter.jpg
Original Eleaf iJust 3 80W 3000mAh Mod + ELLO Duro Tank Kit $40.99
The Original Eleaf iJust 3 Kit consists of Eleaf iJust 3 Mod and ELLO Duro Tank. This item also has other colors to choose.
Mod:
The Eleaf iJust 3, a new upgraded version of iJust series, has the most gorgeous looking than ever. Powered by an internal 3000mAh battery, the iJust 3 is capable of firing up to 80 watts. Its intuitive four-color LEDs are for ease of checking battery level. In addition, there are six beautiful colors with three different patterns available for your choice.
Tank:
ELLO Duro, a new member of Eleaf ELLO family, features all-new reimagined Net and Multihole coil technologies which present unprecedented vaping experience with ultra flavorful taste and huge clouds and have a longer lifespan. To fill the tank, you just need to slide the drip tip back to reveal the fill port. The tank has 6.5ml of juice capacity.
http://www.3fvape.com/194462-home_de...015-02-ohm.jpg
Original iBuddy i1 1800mAh Heating Kit $52.99
The Original iBuddy i1 is the first innovative device of pin-style heating element. It has built-in 1800mAh battery. It can work together with iBuddystick (not included). With longer lifespan, integrated design and easy operation, iBuddy i1 is a nice device to vape. This item also has other colors to choose.
http://www.3fvape.com/194488-home_de...ng-kit-red.jpg
Original GeekVape Ceramic Tweezer for E-Cigarette $1.99
The Geekvape Ceramic Tweezer is Multi-functional E-cig DIY tool with advanced stainless steel body and ceramic tip. The Ceramic Tweezer can be used with coil building, diamonds selecting, circuit checking, eyelash cleaning and so on. Good tool for DIY lovers.
http://www.3fvape.com/194454-home_de...lver-black.jpg
Original GeekVape Diagonal Pliers for E-Cigarette $2.99
The Geekvape Diagonal Pliers for E-cig DIY is a better DIY tool to cut coils. Allows for close cutting to posts. It will make the DIY easier. Very convenient and practical tool for vapers.
http://www.3fvape.com/194457-home_de...ette-black.jpg

Original Zoor 500mAh Portable Pod System Device $42.99
The original ZOOR Ultra-Portable Pod System Device delivers the modern progression of today's travel-friendly pod systems, beautifully designed with an integrated 500mAh lithium battery and a tasty collection of pre-filled pods (not included). The ZOOR features a robust pen-style design and optimized for portability with soft curvature all-around and a comfortable grip section. Staying true to its closed-system core, the ZOOR is enabled by a draw-activated mechanism with a built-in 500mAh lithium rechargeable battery and LED indicators. A proprietary magnetic pod is implemented onto the device for easy-to-use set-up, housing a wide range of replacement pods infused with Ceramic Coil Technology. Each pod is pre-filled with 2mL of salts e-liquid in a lot of flavor options such as Apple, Cake, and Mint ICE.
This product comes with battery device only, pod cartridges not included.
http://www.3fvape.com/194941-home_de...vice-black.jpg
Original Arctic Dolphin Anita 100W TC VW Squonk Box Mod $41.99
The original Arctic Dolphin Anita Squonk Box Mod is a regulated BF mod, which can reach maximum output up to 100W with single 18650, 20700, or 21700 battery (not included). With the 0.96inch OLED screen, all necessary vaping data can be displayed on it. The resistance range is from 0.06 to 1 ohm (TC) / 0.06 to 3ohm (VW). This item also has other colors to choose.
http://www.3fvape.com/195019-home_de...0700-21700.jpg
Original Arctic Dolphin Blaze RDA Rebuildable Dripping Atomizer with Bf Pin $22.99
The original Arctic Dolphin Blaze RDA is a 24mm BF RDA with gold plated dual post build deck, which provides great conductivity. The RDA comes with adjustable side airflow design, giving you great flavor and huge vapor production. PEI drip tip is included.
This RDA comes with bottom feeder pin. This item also has other colors to choose.
http://www.3fvape.com/194981-home_de...m-diameter.jpg
Original Serisvape Bomb UFO V1.5 RDTA Rebuildable Dripping Tank Atomizer $27.99
The Original Serisvape Bomb UFO V1.5 RDTA is a 25mm RDTA which has many innovative design. The oil plug is positioned in the middle of the deck and it can block the tank and the drip tip, making it leak-proof and dust-proof. The tank comes with 2ml juice capacity. The RDTA has star style side airflow and top hidden airflow. The PEI drip tip is round shape, which can not only fit the oil plug, but also make vapor more denser due to its beveled internal structure. This item also has other colors to choose.
http://www.3fvape.com/194991-home_de...m-diameter.jpg
Original Wismec Guillotine V2 RDA Rebuildable Dripping Atomizer with Bf Pin $23.99
The original Wismec Guillotine V2 RDA is a 24mm RDA with beautiful resin drip tip and dual post build deck for easy coil building. The adjustable side airflow brings great flavor to you. Guillotine V2 RDA is one of the best BF RDA for your squonk mod. This item also has other colors to choose.
http://www.3fvape.com/195014-home_de...m-diameter.jpg
Original Vaporesso Cascade One Plus 3000mAh Mod + Cascade Baby Tank Kit $36.99
The original Vaporesso Cascade One Plus Kit consists of Cascade One Plus Mod and Cascade Baby Tank.
Vaporesso Cascade One Plus Kit Powered by built-in 3000mAh battery, provides a long-lasting vaping time to you. The Cascade Baby features top refill and unique safety lock mechanism for easy filling and anti-leakage. It has an innovative isolation structural design that separates coil and juice chamber, allowing consistent, intense flavor at every puff also reducing lower leakage and dry hit potential. The tank adopts innovative GT Mech coils too.
http://www.3fvape.com/194948-home_de...ml-018-ohm.jpg
810 Replacement Drip Tip for 528 Goon / Kennedy / Reload RDA $1.99
The 810 drip tip is made from PC with 11mm height. It is suitable for Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA.
http://www.3fvape.com/194928-home_de...en-pc-11mm.jpg
Original VapeOnly Replacement MS Coil Head for Malle S Lite Starter Kit $7.99
The replacement MS Coil Head features 1.5ohm resistance and is suitable for Authentic VapeOnly Malle S Lite Starter Kit.
This product comes with 5 PCS in 1 pack.
http://www.3fvape.com/194931-home_de...-ohm-5-pcs.jpg
Original VapeOnly Replacement Coil Head for vPen Starter Kit $7.99
The replacement Coil Head features 1.3ohm resistance and is suitable for Authentic VapeOnly vPen Starter Kit.
This product comes with 5 PCS in 1 pack.
http://www.3fvape.com/194932-home_de...-ohm-5-pcs.jpg
Original VapeOnly Replacement vAir-P Coil Head for vPipe 3 Starter Kit $8.99
The replacement Coil Head features 0.7ohm resistance and is suitable for Authentic VapeOnly vPipe 3 Starter Kit.
This product comes with 5 PCS in 1 pack.
http://www.3fvape.com/194933-home_de...-ohm-5-pcs.jpg
Original SMOKTech SMOK V12 Prince Mesh Coil for TFV12 Prince Tank $10.99
Compared with traditional coil, the authentic SMOK TFV12 Prince Mesh Coil has a wide heating area, which can heat evenly and absorb e-liquid effectively, and it ensures you preferable flavor and huge vapor. What's more, the mesh coil has a longer life span.
This product comes with 3PCS in 1 pack. This item also has other types and Wattage range to choose.
http://www.3fvape.com/194934-home_de...080w-3-pcs.jpg

Original GeekVape Aegis Legend Mod 200W TC VW Variable Wattage Box Mod $73.90
The original GeekVape Aegis Legend Mod is a stylish box mod designed to be water and shock resistant. The Aegis Legend is more powerful than its previous version. Compatible with dual 18650 batteries (not included) and powered by the new AS chipset, Aegis Legend releases up to 200W output. Aegis Legend uses up to six different materials to achieve style and extreme durability, including stainless steel powder metallurgy, zinc die casting alloys, die-casting aluminum, 40hrc carbon steel, LSR silicone and leather. If you are looking for a durable box mod with extreme power and portability, the Aegis Legend is the best choice. This item also has other colors to choose.
http://www.3fvape.com/195111-home_de...-2-x-18650.jpg
Original CoilART MAGE RTA V2 Rebuildable Tank Atomizer $35.00
The original CoilART MAGE RTA V2 is an updated version of MAGE RTA. MAGE V2 RTA is 24mm in diameter and has 3.5ml of juice capacity, which can be extended to 5.5ml with extra PCTG bubble tube. The postless build deck is gold plated and has 29 airholes (1mm diameter) at the post, where the airflow will travel up and hit the bottom and side of the coils. The RTA comes with 810 drip tip and 510 drip tip adapter. This item also has other colors to choose.
http://www.3fvape.com/195269-home_de...m-diameter.jpg
Flash e-Vapor V4.5 RTA Rebuildable Tank Atomizer Clone $23.99
The Flash e-Vapor V4.5 RTA Clone is a 23mm rebuildable tank constructed from stainless steel. The RTA features dual post build deck and adjustable airflow for MTL vaping. This tank will provide fantastic mouth-to-lung vaping experience.
http://www.3fvape.com/195278-home_de...m-diameter.jpg
VG V5s RTA Rebuildable Tank Atomizer Clone $22.99
The VG V5s RTA Clone is a 23mm rebuildable tank with 4.2ml e-juice capacity. It is constructed from stainless steel. The build deck comes with dual post for single coil building, which is friendly to even beginners. With the adjustable bottom airflow, it will bring you smooth vapor and nice flavor.
http://www.3fvape.com/195284-home_de...m-diameter.jpg
Original GeekVape Aegis Legend Mod 200W TC VW Box Mod + Aero Mesh Version Tank TPD Kit $96.50
The original GeekVape Aegis Legend Kit consists of GeekVape Aegis Legend Mod and Aero Mesh Version Tank. This item also has other colors and Capacity to choose.
Mod:
The original GeekVape Aegis Legend Mod is a stylish box mod designed to be water and shock resistant. The Aegis Legend is more powerful than its previous version. Compatible with dual 18650 batteries (not included) and powered by the new AS chipset, Aegis Legend releases up to 200W output. Aegis Legend uses up to six different materials to achieve style and extreme durability, including stainless steel powder metallurgy, zinc die casting alloys, die-casting aluminum, 40hrc carbon steel, LSR silicone and leather. If you are looking for a durable box mod with extreme power and portability, the Aegis Legend is the best choice.
Tank:
The GeekVape Aero Mesh Version Tank is a 25mm sub ohm tank that adopts super mesh X1 coil head, which comes with 0.2ohm resistance and supports output at 30~90W. Another coil is IM4 head with 0.15ohm resistance and supports output at 60~80W.
The Aero Tank has 2ml of juice capacity for TPD compliant.
http://www.3fvape.com/195021-home_de...-18650-2ml.jpg
Original VapeOnly vPipe 3 e-Pipe Starter Kit $85.99
The original VapeOnly vPipe 3 is a high end e-cig pipe device made from rosewood that combines traditional pipe functions with new revolutions. The vPipe body has a LED light indicator and blinks from up to down when using. And the included BVC atomizer has a 1.2ml tank capacity and 0.7ohm resistance, which can be filled easily with all detachable structure. Luxurious design and superior technologies make vPipe III a piece of art work.
This product comes without any battery.
http://www.3fvape.com/195262-home_de...2ml-07-ohm.jpg
Original Wismec Replacement Bottom Feeder Bottle for Luxotic Squonk Box Mod / Kit $5.99
Apart from the original plastic e-liquid bottle, the newly added colorful silicone bottle will offer you more choices. The bottles are attractive in look and convenient in use, providing you with completely different vaping experiences. It is suitable for Luxotic BF Box Mod (Kit).
This product comes with 2 PCS in 1 pack. This item also has other colors to choose.
http://www.3fvape.com/195238-home_de...75ml-2-pcs.jpg

Original Limitless LMC 200W TC VW Variable Wattage Box Mod $58.99
The original Limitless LMC 200W Box Mod is a 200W regulated box mod with interchangeable plates. The Limitless 200W Mod is powered by dual 18650 battery (not included) that can fire up to max 200 watts. It supports low resistance to 0.08 ohm. Unique stylish design and fully customizable, three firing modes and multiple protections, makes LMC 200W Box Mod a good choice for you to vape. This item also has other colors to choose.
http://www.3fvape.com/195310-home_de...-2-x-18650.jpg
Original Asmodus Minikin V2 180W TC VW Variable Wattage Box Mod $100.89
The original Asmodus Minikin V2 is powered by a GX-180-HT chip which incorporates the same battery power saving capabilities as its predecessors but features 180W output and touch screen control. Coming with redesigned ergonomic body, you can hold it comfortably in hands. The mod is powered by dual 18650 batteries (not included). This item also has other colors to choose.
http://www.3fvape.com/195324-home_de...-2-x-18650.jpg
Chrome Hearts V2 Mechanical Mod Clone $18.99
The Chrome Hearts V2 Mechanical Mod Clone is made out of 316 stainless steel. It features engraved pattern on the tube and 510 threading connection (not hybrid). It is powered by single 18650 battery (not included). The fire button is activated by magnets. This item also has other Material and Colors to choose.
http://www.3fvape.com/195338-home_de...-1-x-18650.jpg
Goon Ti RDA Rebuildable Dripping Atomizer Clone with BF Pin $8.99
The Goon Ti RDA Clone is constructed from 316 stainless steel in 24mm diameter. It features bridge clamp design for easy building and middle side adjustable air slots for airflow control.
This RDA comes with bottom feeder pin. This item also has other colors to choose.
http://www.3fvape.com/195366-home_de...m-diameter.jpg
Original FreeMax Fireluke Mesh Sub Ohm Tank Atomizer $27.99
The original FreeMax Fireluke Mesh Sub Ohm Tank features 24mm diameter, 3ml juice capacity, convenient top fill design, adjustable bottom airflow, and most importantly the new mesh coil. The new mesh coil comes with 0.15ohm, supporting 40W to 90W power. It has wide contact surface between organic cotton and coil, which allows it to burn evenly and absorb e-juice effectively, giving you more intensive flavor and vapor production. This item also has other colors to choose.
http://www.3fvape.com/195381-home_de...m-diameter.jpg
Original Suorin Eva 380mAh All-in-One Starter Kit $26.99


The original Suorin Eva Starter Kit is an all-in-one pod system device, which features slim and compact design. The Eva integrates built-in 380mAh battery and a refillable pod cartridge with 1.8ml of capacity. The LED battery life indicator helps you know the battery juice and Suorin Eva supports USB charging.
http://www.3fvape.com/195294-home_de...black-18ml.jpg
Vapeasy Replacement Top Cap for Battle RDA Clone $11.99
The replacement top cap from Vapeasy is made out of titanium and suitable for Battle RDA Clone. This item also has other Material to choose.
http://www.3fvape.com/195290-home_de...m-titanium.jpg

Original GeekVape Zeus Dual RTA Rebuildable Tank Atomizer Standard Edition $37.99
The Original Zeus Dual RTA is an upgraded dual coil version of the original Zeus RTA, with the innovative leak-proof top airflow system, airflow transferring from the top to the bottom to maintain great flavor. It comes with upgraded postless build deck that allows for easy building with both single coil and dual coil. Zeus Dual RTA is compatible with 810 and 510 drip tip and 5.5ml bubble tank (not included).
This RTA is Standard Edition with 4ml of capacity. This item also has other colors to choose.
http://www.3fvape.com/195545-home_de...m-diameter.jpg
Original GeekVape Aero Mesh Version Sub Ohm Tank Atomizer TPD Edition $29.90
The Original GeekVape Aero Mesh Version Tank is a 25mm sub ohm tank that adopts super mesh X1 coil head, which comes with 0.2ohm resistance and supports output at 30~90W. Another coil is IM4 head with 0.15ohm resistance and supports output at 60~80W.
The Aero Tank is TPD Edition with 2ml of juice capacity. This item also has a Standard Edition, other Capacity and colors to choose.
http://www.3fvape.com/195717-home_de...m-diameter.jpg
Dvarw MTL RTA Rebuildable Tank Atomizer Clone $12.99
The Dvarw MTL RTA Clone is a 22mm RTA made out of 316 stainless steel. The build deck comes with dual post design and bottom airflow system. The kit comes with 4 different airflow accessories to adjust airflow. This RTA will bring you extreme MTL vaping experience.
http://www.3fvape.com/195733-home_de...m-diameter.jpg
Original Suorin Drop 300mAh All-in-One Starter Kit $39.99
The Original Murdex Suorin Drop Starter Kit is an all-in-one vaping kit clone with unique shape and design. It comes with built-in 300mAh battery and 2ml cartridge. Compact size enables it to be carried around anywhere you go. This starter kit is definitely suitable for all vapers. This item also has other colors to choose.
http://www.3fvape.com/195687-home_de...2ml-14-ohm.jpg
Original Suorin Air 400mAh Battery All-in-one Starter Kit $21.99
The Original Suorin Air is a game changing all-in-one device that is redefining the term "stealth vaping". Smaller than a credit card, and slimmer than a standard ballpoint pen; the Suorin Air features a 400mAh rechargeable battery and 2ml refillable pod which provides incredible battery life and liquid capacity for a device of such diminutive dimensions. Incorporated into the design is a master on / off switch and subdued battery life indicator light which is activated when the device is firing and charging. An extremely efficient design, there are no buttons, screens, or complicated settings; the device is instantly activated through inhalation. The Suorin Air is manufactured with excellent build quality and exacting tolerances which provide a rarely matched level of reliability and durability. Whether you are seeking to streamline your setup, add a reliable backup, or start with a stylish and dependable device; the Suorin Air is the device you've been waiting for.
http://www.3fvape.com/195699-home_de...it-red-2ml.jpg
Original OVNS Cookie 400mAh All-in-One Starter Kit $21.99
The Ovns Cookie Starter Kit features unique rhombus shape in a small size which is both lightweight and easy to hold in hand. The Ovns Cookie Kit comes with a built-in 400mAh battery and 2ml cartridge pod. The Ovns Cookie Starter Kit adopts 1.4ohm coil with large vapor production specially designed for MTL vaping. This item also has other colors to choose.
http://www.3fvape.com/195705-home_de...14-ohm-2ml.jpg
Original GeekVape Replacement Glass Tank Tube for Zeus Dual RTA $4.50
The replacement glass tank tube from GeekVape has 4ml of capacity and is suitable for original GeekVape Zeus Dual RTA.
http://www.3fvape.com/195639-home_de...al-rta-4ml.jpg
Original GeekVape Super Mesh Coil for Aero Mesh Version Tank $19.50
The GeekVape Super Mesh Coil comes with 0.2ohm resistance and works well at 30~90W, best 60~80W. It is suitable for original Geekvape Aero Mesh Version Tank.
This product comes with 5 PCS in 1 pack.
http://www.3fvape.com/195641-home_de...090w-5-pcs.jpg
Original GeekVape Replacement Bubble Glass Tank Tube for Zeus Dual RTA $4.90
The replacement bubble glass tank tube from GeekVape has 5.5ml of capacity and is suitable for original GeekVape Zeus Dual RTA.
http://www.3fvape.com/195640-home_de...l-rta-55ml.jpg
Original GeekVape IM4 Coil for Aero Mesh Version Tank $19.50
The GeekVape IM4 Coil comes with 0.15ohm resistance and works well at 60~80W. It is suitable for original Geekvape Aero Mesh Version Tank.
This product comes with 5 PCS in 1 pack.
http://www.3fvape.com/195642-home_de...080w-5-pcs.jpg
Original Suorin Drop Replacement Refillable Cartridge $3.99
The replacement cartridge features 1.2ohm resistance and 2ml of juice capacity. It is refillable and suitable for original Suorin Drop starter kit.
http://www.3fvape.com/195643-home_de...12-ohm-2ml.jpg
Original Suorin Air Replacement Refillable Cartridge $3.99
The replacement cartridge features 2ml of juice capacity. It is refillable and suitable for original Suorin Air starter kit.
http://www.3fvape.com/195645-home_de...-black-2ml.jpg
Original Angorabbit Cotton Share Wicking Cotton for RDA / RTA / RDTA $3.99
The Original Angorabbit Cotton Share is 100% natural cotton. It has been treated professionally for vapers to get the better taste of the e-juicy. It has high resistance to heat, long service life, and easy to use.
http://www.3fvape.com/195649-home_de...dta-orange.jpg
Original SMOKTech SMOK V8 Baby Strip Coil for TFV12 Baby Prince Tank $18.99
The Original SMOK Strip coil is a fire-new revolutionary coil from SMOK, which is made of Kanthal. SMOKTech has innovatively developed the heating membrane unit, whose porous structure can bring great surface adsorption so as to fasten the speed of e-juice absorption. It has larger heating area and radiation area, making the heating more evenly and helping the e-juice to heat up quickly. Besides, it can also avoid the heat accumulation and the corrosion of heating materials. Compared with other traditional heating wires, strip coil can easily load higher power. The large number of thin films formed in the porous has greatly improved the free energy of the surface. On the combined effects of surface tension and van Edward force, it will activate numerous aromatic compounds in the e-juice to achieve both large cloud and dense flavor, bringing an unprecedented vaping experience.
This product comes with 5PCS in 1 pack.
http://www.3fvape.com/195651-home_de...100w-3-pcs.jpg
Original Vapeasy Replacement Mouthpiece for Kayfun 5 / Kayfun Prime Drip Tip $4.99
The Original Vapeasy Replacement Mouthpiece is used for the Vapeasy Kayfun 5 / Kayfun Prime 510 Drip Tip. It comes with threads at bottom to become piece with the base (not included). The kit comes with 1 x Acrylic mouthpiece, 1 x PEI mouthpiece, and 2 x POM mouthpieces. The POM mouthpiece comes with 5.5mm bore for low resistance and huge clouds, while the Acrylic and PEI ones comes with 3.9mm bore for high resistance and small vapor.
This product comes with 4 PCS of mouthpieces in 1 pack.
http://www.3fvape.com/195652-home_de...ic-pom-pei.jpg
Original Shield Cig Boss Device Preloaded Cotton for RDA / RTA / RDTA $4.99
The Original Shield Cig Boss Device Cotton features fast absorption and easy separation. The pre-cut cotton is very easy to wick with two heads at both ends. It is designed for low ohm builds and will leave you with minimal dry hits. This cotton provides more capacity and clean pure flavor.
This product comes with 12 x Pre-cut cotton and 3 x cotton, totally 15 PCS.
http://www.3fvape.com/195682-home_de...ite-15-pcs.jpg
Original Ovns Cookie Replacement Refillable Cartridge $3.99
The Original Ovns Cookie Replacement Cartridge is specially design for Ovns Cookie Starter Kit, featuring 2ml juice capacity and 1.4ohm coil for nice flavor and huge clouds.
http://www.3fvape.com/195686-home_de...14-ohm-2ml.jpg
SXK Vape Shell for BB Box Mod Clone $19.90
The SXK Vape Shell is made out of 316 Stainless Steel and is suitable for SXK BB Box Mod Clone.
http://www.3fvape.com/195677-home_de...less-steel.jpg
Original Avidartisan Steamcoil 6 in 1 A1 Ni80 SS316 Pre-built Coil Kit $10.99
The Original Avidartisan Steamcoil 6 in 1 Pre-built Coil Kit comes with 4 x 0.25ohm Alien Coil, 2 x 0.19ohm Araneid Coil, 4 x 0.25ohm Staggered Clapton Coil, 4 x 0.21ohm Triple Clapton Coil, 2 x 0.3ohm Interlock Clapton Coil, 4 x 0.3ohm Staircase Clapton Coil.
This product comes with totally 20 PCS of pre-built coils.
http://www.3fvape.com/195650-home_de...ohm-20-pcs.jpg
Original Vapeasy 510 Drip Tip Kit with Logo for Kayfun 5 / Kayfun Prime RTA Clone $6.99
The Original Vapeasy 510 Drip Tip Kit for Kayfun 5 / Kayfun 6 RTA Clone consists of 1 base (SS316) and 4 mouthpieces (Acrylic, POM, PEI).
The base is made out of 316 stainless steel. With the mouthpiece, it is suitable for Kayfun 5,Kayfun Prime and other atomizers that fit 510 drip tip.
The mouthpiece comes with threads at bottom to become piece with the base. The kit comes with 1 x SS316 drip tip base, 1 x Acrylic mouthpiece, 1 x PEI mouthpiece, and 2 x POM mouthpieces. The POM mouthpiece comes with 5.5mm bore for low resistance and huge clouds, while the Acrylic and PEI ones comes with 3.9mm bore for high resistance and small vapor.
This product comes with 4 x mouthpieces and 1 x drip tip base (with Kayfun logo) in 1 pack. There are other non-logo versions of this project, you can choose what you like.
http://www.3fvape.com/195659-home_de...m-pei-16mm.jpg

Original ESPION Infinite 230W TC VW Variable Wattage Box Mod $57.69
The Joyetech ESPION Infinite Mod has a set of tunnel light effects, it even reacts to each action you made. You can easily manage it with an intuitive 0.96inch color display. The ESPION Infinite is powered by dual 21700 batteries, but still works with normal 18650 as well (batteries not incldued), reaching a formidable 230W output and supporting 2A quick charge. This item also has other colors to choose.
http://www.3fvape.com/195816-home_de...8650-21700.jpg
Bettle V3 Hybrid Mechanical Mod Clone $20.99
The Bettle V3 mechanical mod Clone is constructed from brass. It features hybrid connection and knurled body. With the raw power output, this mod will bring you extreme huge clouds and optimal flavor.
http://www.3fvape.com/195829-home_de...-1-x-18650.jpg
Flave RTA Rebuildable Tank Atomizer Clone with BF Pin $8.99
The Flave RTA Clone is constructed from stainless steel in 24mm diameter. It features dual post deck for single coil and middle side adjustable airflow. The deck has notches for easy installation of the coil. The tank is large and allows to take about 30 puffs per drip.
This RTA comes with bottom feeder pin. This item also has other material and colors to choose.
http://www.3fvape.com/195861-home_de...m-diameter.jpg
YFTK Strike Hellfire RDA Rebuildable Dripping Atomizer Clone with BF Pin $19.99
The YFTK Strike Hellfire RDA Clone is constructed from 316 stainless steel in 22mm diameter. Its build deck adopts dual post design for single coil building. The airflow can be adjusted by the top cap. POM wide bore drip tip is included.
This RDA comes with bottom feeder pin.
http://www.3fvape.com/195886-home_de...m-diameter.jpg
Vapeasy Dvarw MTL RTA Rebuildable Tank Atomizer Clone $21.99
The Vapeasy Dvarw MTL RTA Clone is a 22mm RTA made out of 316 stainless steel. The build deck comes with dual post design and bottom airflow system. The kit comes with 4 different airflow accessories to adjust airflow. This RTA will bring you extreme MTL vaping experience.
http://www.3fvape.com/195888-home_de...m-diameter.jpg
Original ESPION Infinite 230W TC VW Box Mod + ProCore Conquer Tank Kit $80.66
The original Joyetech ESPION Infinite Kit consists of ESPION Infinite Mod and ProCore Conquer Tank. This item also has other colors to choose.
Mod:
The Joyetech ESPION Infinite Mod has a set of tunnel light effects, it even reacts to each action you made. You can easily manage it with an intuitive 0.96inch color display. The ESPION Infinite is powered by dual 21700 batteries, but still works with normal 18650 as well (batteries not incldued), reaching a formidable 230W output and supporting 2A quick charge.
Tank:
The Joyetech ProCore Conquer Tank is uniquely designed. Having the new bulging glass tube, its capacity was upgraded to 5.5ml. ProC series heads are all capable: from direct-lung or mouth-to-lung, from massive vapor production to optimal flavor. Meanwhile, its push-to-open system makes filling easily.
http://www.3fvape.com/195784-home_de...21700-55ml.jpg
810 Replacement Drip Tip for TFV8 / TFV12 Tank / 528 Goon / Kennedy / Reload RDA $2.99
The 810 drip tip is made from resin with 13.5mm height. It is suitable for TFV8 Tank, TFV8 Big Baby Tank, TFV12 Tank, TFV12 Prince Tank, Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA.
One piece will be shipped (random color). More options than what's on the image.
http://www.3fvape.com/195739-home_de...esin-135mm.jpg
810 Color Changing Drip Tip for TFV8 / TFV12 Tank / 528 Goon / Kennedy / Reload RDA $2.99
The 810 drip tip is made from resin with 12mm height. It is suitable for TFV8 Tank, TFV8 Big Baby Tank, TFV12 Tank, TFV12 Prince Tank, Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA.
This drip tip will change its original color when being heated and will return to original color after cooling down. For the color changing effect, please check the first image. This item also has other colors to choose.
http://www.3fvape.com/195752-home_de...resin-12mm.jpg
810 Replacement Drip Tip for TFV8 / TFV12 Tank / 528 Goon / Kennedy / Reload RDA $3.99
The 810 drip tip is made from glass (mouthpiece) and stainless steel (base) with 13mm height. It is suitable for TFV8 Tank, TFV8 Big Baby Tank, TFV12 Tank, TFV12 Prince Tank, Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA. This item also has other colors to choose.
http://www.3fvape.com/195767-home_de...steel-13mm.jpg
Original Vandy Vape Replacement 18650 Battery Adapter for Pulse BF 80W Box Mod $2.99
The replacement 18650 battery adapter is suitable for authentic Vandy Vape Pulse BF 80W Box Mod. This product also has 2 PCS in 1 pack and you can choose what you like.
http://www.3fvape.com/195782-home_de...-mod-black.jpg

Bettle V3 Hybrid Mechanical Mod Clone $21.99
The Bettle V3 mechanical mod Clone is constructed from brass. It features hybrid connection, copper battery contact and knurled body. The fire button is activated by magnets. Powered by single 18650 battery, this mod will bring you extreme huge clouds and optimal flavor. This item also has other colors to choose.
http://www.3fvape.com/196078-home_de...-1-x-18650.jpg
Original Hellvape Dead Rabbit SQ RDA Rebuildable Dripping Atomizer with BF Pin $23.19
The original Hellvape Dead Rabbit SQ RDA is 22mm version of the Dead Rabbit and it is a single coil RDA. It comes with new features like a barrel lock, and the side airflow for Mouth to Lung Vaping. Its deck comes with dual post for single coil building, and the slide in top coil deck takes the guesswork out of pre-cutting your coil leads.
This RDA comes with bottom feeder pin. This item also has other colors to choose.
Please note: the drip tip included is random color.
http://www.3fvape.com/196104-home_de...l-22mm-dia.jpg
Original Wotofo Recurve RDA Rebuildable Dripping Atomizer with BF Pin $26.59
The original Wotofo Recurve RDA is a recent collaboration between Wotofo and the well-known YouTube reviewer Mike Vapes. This single coil RDA gets its name from its overall shape, which is a total innovation compared to the existing straight sleeve design on all RDAs available now. The sleeve of this RDA curves like a recurve bow implying energy and efficiency. It is 24mm in diameter and features side & bottom airflow hitting on postless coil installations to give a sensational flavor burst.


This RDA comes with bottom feeder pin. This item also has other colors to choose.
http://www.3fvape.com/196127-home_de...m-diameter.jpg
SXK Billet Box 70W All-in-One Box Mod Kit Clone $85.00
The SXK Billet Box Mod Kit Clone is constructed from aluminum with an all-in-one design. This mod comes with Comes with Kanger Subtank RBA Coil, Kanger OCC coil adaptor, Nautilus coil adaptor. This item also has other material,and different power products with Evolv DNA 60 chip to choose. You can choose what you like.
http://www.3fvape.com/196088-home_de...-1-x-18650.jpg
510 Replacement Drip Tip for RDA / RTA / Sub Ohm Tank Atomizer $1.99
The replacement 510 drip tip is made from PC with 11mm height. It is suitable for all atomizers that fit 510 drip tip. This item also has other colors to choose.
http://www.3fvape.com/196051-home_de...nt-pc-11mm.jpg
810 Replacement Drip Tip for 528 Goon / Kennedy / Reload RDA $2.99
The 810 drip tip is made from resin with 14mm height. It is suitable for TFV8 Tank, TFV8 Big Baby Tank, TFV12 Tank, TFV12 Prince Tank, Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA. This item also has other colors to choose.
http://www.3fvape.com/196060-home_de...resin-14mm.jpg

Coppervape Dvarw MTL RTA Rebuildable Tank Atomizer Clone $13.99
The Coppervape Dvarw MTL RTA Clone is a 22mm RTA made out of 316 stainless steel and PC tank tube. The build deck comes with dual post design and bottom airflow system with 1.2mm airhole. The RTA supports 4 different airflow accessories to adjust airflow (not included). This RTA will bring you extreme MTL vaping experience. This item also has other Material and colors to choose.
http://www.3fvape.com/196332-home_de...m-diameter.jpg
Original Vaptio Solo-Flat 650mAh All-in-One Starter Kit $21.99
The original Vaptio Solo-Flat Starter Kit is an ultra slim and powerful closed system pod device with a built-in 650mAh battery and 1.5ml refillable tank. It has a lip friendly duckbill mouth drip tip and a smart airflow control chip for instant vaping. The Solo-flat has an easy top filling design that you can fill by removing the top cap. A fountain type indicator light makes the Vaptio solo-flat more attractive. This item also has other colors to choose.
http://www.3fvape.com/196236-home_de...1-ohm-15ml.jpg
Original Vaptio Spin-It 650mAh All-in-One Starter Kit $21.99
The original Vaptio Spin-It Starter Kit is a super cool all-in-one pod system device. The kit features the top terminal spinnable drip tip with 1.8ml refillable cartridge. When you spin the drip tip and keep it inside, the power supply will be cut off, avoiding any risk of mis-firing. Powered by built-in 650mAh battery and constant 15W output as well as a micro USB port at the bottom, it will provide a stable performance to bring you amazing vaping experience. This item also has other colors to choose.
http://www.3fvape.com/196266-home_de...1-ohm-18ml.jpg
Original Suorin Vagon 12W 340mAh Starter Kit $34.99
The original Suorin Vagon Kit is a portable ergonomically designed starter kit with pod vaporizer system. It utilizes a 340mAh built-in battery and 2.5ml refillable Vagon pods. With the draw-to-activate design, you can just take a puff without any fire button. The pod can be filled with Nic salt or regular e-liquid. This item also has other colors to choose.
http://www.3fvape.com/196326-home_de...green-25ml.jpg
Coppervape Replacement Screws + O-rings Accessory Bag for Dvarw RTA Clone $1.39
The replacement screws and o-rings are suitable for Coppervape Dvarw RTA Clone.
http://www.3fvape.com/196171-home_de...-x-o-rings.jpg
Coppervape Replacement Oval Hole Chimney for Dvarw RTA Clone $1.99
The replacement Oval hole chimney is suitable for Coppervape Dvarw RTA Clone. The Oval hole is bigger than standard round hole, which could be helpful for vapers to use use very high VG juice and bigger coils. The hole size is 4mm by 2.5mm.
http://www.3fvape.com/196173-home_de...less-steel.jpg
Coppervape Replacement AFC Airflow Control Tight Kit for Dvarw RTA Clone $2.59
The replacement AFC Airflow Control Tight Kit is suitable for Coppervape Dvarw RTA Clone. The AFC accessory comes with 0.8mm and 1mm airflow hole for your option.
This product comes with 2 PCS in 1 pack. This item also has a Normal Kit. Different Airflow hole inner diameter can be choose.
http://www.3fvape.com/196177-home_de...l-08mm-1mm.jpg
Coppervape Replacement 510 MTL Drip Tip for Dvarw RTA Clone $1.39
The replacement 510 drip tip is made from Teflon with 22mm height. It is suitable for Coppervape Dvarw RTA Clone and all atomizers that fit 510 drip tip. This item also has other size and colors to choose.
http://www.3fvape.com/196183-home_de...eflon-22mm.jpg
Coppervape Replacement 510 Wide Bore Drip Tip for Dvarw RTA Clone $1.39
The replacement 510 drip tip is made from POM with 17mm height. It is suitable for Coppervape Dvarw RTA Clone and all atomizers that fit 510 drip tip. This item also has other size and colors to choose.
http://www.3fvape.com/196186-home_de...k-pom-17mm.jpg
Coppervape Replacement Tank Tube for Dvarw RTA Clone $1.99
The replacement tank tube has 5ml of juice capacity and is suitable for Coppervape Dvarw RTA Clone. It is made out of PC. This item also other Capacity, Material and colors to choose.
http://www.3fvape.com/196195-home_de...ent-pc-5ml.jpg
Coppervape Replacement Tank Tube + Top Chimney Kit for Dvarw RTA Clone $3.99
The replacement tank tube has 2ml of juice capacity and is suitable for Coppervape Dvarw RTA Clone. It is made out of PEI. The top chimney is made out of 316 stainless steel. This item also has other Capacity to choose.
http://www.3fvape.com/196207-home_de...-steel-2ml.jpg
SJMY Replacement Front + Back Cover Panel for SXK Billet Box Mod Clone $19.99
The replacement front and back cover panel from SJMY is made out of G10 fiberglass and is suitable for SXK Billet Box Mod Clone.
This product comes with 2 PCS in 1 pack. This item also has other colors to choose.
http://www.3fvape.com/196215-home_de...lass-2-pcs.jpg
Original Vandy Vape Tool Kit Pro for DIY Coil Building $18.99
The newest VandyVape Tool Kit Pro is a perfect all-in-one kit for DIY users. All tools are high-quality made to reach various needs of users.
http://www.3fvape.com/196231-home_de...ors-pliers.jpg
Original Vaptio Replacement Pod Cartridge for Solo-Flat Starter Kit $10.99
The replacement pod cartridge is suitable for Original Vaptio Solo-Flat Starter Kit. It comes with 1ohm coil and 1.5ml of juice capacity.
This product comes with 4 PCS in 1 pack.
http://www.3fvape.com/196235-home_de...1-ohm-15ml.jpg