YFTK Pulsar Mechanical Squonker Box Mod Clone $32.99
The YFTK Pulsar Squonker Box Mod Clone is constructed from POM with stainless steel top and bottom panel. It is powered 1 x 18650 battery (not included). The built-in bottle comes with 11ml large capacity for squonking and the both sides has openings for more convenient operation.This itm also has many color to choose.
The Mod comes with only one bottle, without spare bottle.
http://www.3fvape.com/167924-home_de...-1-x-18650.jpg
Original GTRS Vape V Boy SX500 200W TC VW Variable Wattage Mod $105.99
The Original GTRS V Boy SX500 200W TC Box Mod adopts the YiHi's flagship SX500 chipset which provides high performance and is capable of outputting 200W of maximum wattage. Besides, it supports SXi-Q Intelligent Taste Curve technology, which features a sophisticated algorithmic calculation that allows users to set, fine tune, and save 5 output curves. The ergonomic chassis uses durable and comfortable material for good hand feeling. The mod is powered by 2 x high drain 18650 batteries (not included).This itm also has many color to choose.
http://www.3fvape.com/167891-home_de...-2-x-18650.jpg
Original Vandy Vape Bonza RDA Rebuildable Dripping Atomizer with BF Pin $29.90
The Original Vandy Vape Bonza RDA is a 24mm diameter dripper adopts innovative Fixed screw clamp post to make coil building much easier. The juice well is deep enough to hold about 2ml e-juice. The cap comes with 24 airholes on both side (12 per side) for side airflow control. Food grade resin drip tip and Delrin drip are included.This itm also has many color to choose.
The RDA comes with bottom feeder pin.
http://www.3fvape.com/167819-home_de...m-diameter.jpg
Entheon RDA Rebuildable Dripping Atomizer with BF Pin $8.59
The Entheon RDA Rebuildable Dripping Atomizer is constructed from stainless steel in 22mm diameter. The Innovative dual post style deck and coil clamping system makes coil building effortless. The airflow is adjustable by the two airslots on the side of cap.
This RDA comes with bottom feeder pin.
http://www.3fvape.com/167831-home_de...m-diameter.jpg
Kindbright Speed Revolution RDA Rebuildable Dripping Atomizer Clone with BF Pin $13.99
The Kindbright Speed Revolution RDA Clone is constructed from 316 stainless steel and in 18mm diameter. The deck feature dual post for single / dual coil configuration. The RDA is with bottom feeder pin for squonk ready. There is no replacement center pin for the RDA.
http://www.3fvape.com/167840-home_de...m-diameter.jpg
Kindbright Solo RDA Rebuildable Dripping Atomizer Clone with BF Pin $14.99
The Kindbright Solo RDA Clone is constructed from 316 stainless steel in 22mm diameter. It features two post for single coil building and top-side adjustable airflow.
The RDA comes with bottom feeder pin.
http://www.3fvape.com/167848-home_de...m-diameter.jpg
Kindbright Armor 1.0 RDA Rebuildable Dripping Atomizer Clone with BF Pin $12.99
The Kindbright Armor 1.0 RDA Clone is constructed from 316 stainless steel and in 22mm diameter. It features dual-pole design and supports single and dual coil build. This RDA comes with two black wide bore drip tip.
This RDA comes with bottom feeder pin.
http://www.3fvape.com/167860-home_de...m-diameter.jpg
Kindbright Flave RDA Rebuildable Dripping Atomizer Clone with BF Pin $12.59
The Kindbright Flave RDA Clone is constructed from 316 stainless steel in 24mm diameter. It features dual post deck for single coil and middle side adjustable airflow. The deck has notches for easy installation of the coil. Insulation material helps this RDA to avoid any leaking of e-juice. The RDA comes with wide bore drip tip.
This RDA comes with bottom feeder pin.
http://www.3fvape.com/167866-home_de...m-diameter.jpg
Original SMOKTech SMOK TFV12 Prince Standard Edition Sub Ohm Tank $29.99
The Original SMOK TFV12 Prince Tank from SMOKTech is not only a powerful one but also an all-round sub ohm tank for daily use. The tank adopts 3 newest coils: V12 Prince Q4, V12 Prince X6 and V12 Prince T10, all of which have huge cloud and extremely dense flavor. It also has newly designed crown-style body and colorful Cobra resin drip tip. Besides, it uses convex glass tube, which effectively enlarged the capacity to 8ml.This itm also has many color to choose.
http://www.3fvape.com/167789-home_de...m-diameter.jpg
Original Danmoo Iced Aloe E-juice Liquid for E-cigarettes $9.99
The Danmoo Iced Aloe E-juice Liquid is Aloe Ice flavor. It comes with 30ml e-juice, 3mg/ml nicotine content.This itm also has many flavor to choose.
http://www.3fvape.com/167707-home_de...0ml-3mg-ml.jpg
Original Cola Ginger Tea E-juice Liquid for E-cigarettes $13.99
The Cola Ginger Tea E-juice Liquid is cola ginger tea flavor. It comes with 60ml e-juice, 3mg/ml nicotine content.This itm also has many flavor to choose.
http://www.3fvape.com/167714-home_de...0ml-3mg-ml.jpg
YFTK Replacement Bottom Feeder Squonk Bottle for Pulsar Squonker Mod Clone $7.99
The replacement BF squonk bottle is made from super soft silicone and comes with 11ml capacity. It is suitable for YFTK Pulsar BF Squonk Mod Clone.
http://www.3fvape.com/167720-home_de...icone-11ml.jpg
Original SMOKTech SMOK V12 Prince-Q4 Quadruple Coil for TFV12 Prince Tank $13.99
The V12 Prince-Q4 coil head is suitable for SMOK TFV12 Prince tank atomizer. The V12 Prince-Q4 core features 0.4 ohm resistance which supports 40~100W power output (best 60~80W). This SMOK TFV12 Prince coil head will bring you deep and rich cloud vapor.
http://www.3fvape.com/167725-home_de...100w-3-pcs.jpg
Original SMOKTech SMOK V12-RBA Dual Coil for TFV12 Prince Tank $11.99
The V12 Prince-RBA coil head is suitable for SMOK TFV12 Prince tank atomizer. The V12 Prince-RBA core features 0.25 ohm dual coils. This SMOK TFV12 Prince coil head will bring you massive vapor and rich flavor.
This product will be shipped with one piece.
http://www.3fvape.com/167733-home_de...nk-025-ohm.jpg