Vs: Golden 9mm bullet DRIPTIP
Josko sais vähän parempia kuvia? Ei noista edes näe onko reikää päässä :D Niin on pieni reikä, ettei tuota oikein Drip Tipiksi voi kutsua, Tipiksi korkeintaa. Loistava toteutus anyway! Otat seuraavaksi projektiksi vaikka 9-10mm rosteri putkesta, mihin nyt saa tuon sovitteen sorvattua? Pari pituutta soviteosa+ 5-6mm ja soviteosa +12-15mm, keskireikä NIIN isomkuin siihen on ikinä mahdollista tehdä! Sitten tulee tilauksia :)
Sitä odotellessa yksi(1) 9millinen minullekkin kiitos :)
Vs: Golden 9mm bullet DRIPTIP
Lainaus:
Alkuperäinen postaaja
Esa vuke
Josko sais vähän parempia kuvia? Ei noista edes näe onko reikää päässä :D Niin on pieni reikä, ettei tuota oikein Drip Tipiksi voi kutsua, Tipiksi korkeintaa. Loistava toteutus anyway! Otat seuraavaksi projektiksi vaikka 9-10mm rosteri putkesta, mihin nyt saa tuon sovitteen sorvattua? Pari pituutta soviteosa+ 5-6mm ja soviteosa +12-15mm, keskireikä NIIN isomkuin siihen on ikinä mahdollista tehdä! Sitten tulee tilauksia :)
Sitä odotellessa yksi(1) 9millinen minullekkin kiitos :)
irc logeista muistin nähneeni...
[12:56:08] <toppi- Yakousei: tein 2,5mm reiän tuosta läpi
Ja kuvien laatuun vaikuttaa harvinaislaatuinen tapaus : Käyttäjällä ei kunnollista kameraa.. Tarjolla Nuukian luuri *click*
Mikä sovite?
Vs: Golden 9mm bullet DRIPTIP
Sovite= alaosa kumitiivisteellä
Vs: Golden 9mm bullet DRIPTIP
Lainaus:
Alkuperäinen postaaja
Esa vuke
Sovite= alaosa kumitiivisteellä
Mutta siis "Pari pituutta soviteosa+ 5-6mm ja soviteosa +12-15mm"...
Soviteosa mihin/miksi? (ei mie ny ymmärrä)
Tuo lutkutippi on 9mm luoti+normaalista dripeissä käytössä oleva alaosa, johon voi mistä tahansa käytössä olevasta tipistä siirtää o-rankaan..
Vs: Golden 9mm bullet DRIPTIP
Soviteosa on tietenkin SE osa joka mahtuu kartoon/atoon :D Koska yläosahan ei sinne sovi, tai se ei ainakaan olisi kovin soveliasta ;)
tyyliin http://cdn.shopify.com/s/files/1/008..._large.JPG?898
Vs: Golden 9mm bullet DRIPTIP
Vs: Golden 9mm bullet DRIPTIP
Lainaus:
Alkuperäinen postaaja
Esa vuke
Lainaus:
Alkuperäinen postaaja Minä itte
Tuo lutkutippi on 9mm luoti+normaalista dripeissä käytössä oleva alaosa, johon voi mistä tahansa käytössä olevasta tipistä siirtää o-rankaan..
Eli siinä ON se hakemasi soviteosa
http://dl.dropbox.com/u/11701671/E-s...0032012444.png
Vs: Golden 9mm bullet DRIPTIP
Lainaus:
Alkuperäinen postaaja
Esa vuke
Josko sais vähän parempia kuvia? Ei noista edes näe onko reikää päässä :D Niin on pieni reikä, ettei tuota oikein Drip Tipiksi voi kutsua, Tipiksi korkeintaa. Loistava toteutus anyway! Otat seuraavaksi projektiksi vaikka 9-10mm rosteri putkesta, mihin nyt saa tuon sovitteen sorvattua? Pari pituutta soviteosa+ 5-6mm ja soviteosa +12-15mm, keskireikä NIIN isomkuin siihen on ikinä mahdollista tehdä! Sitten tulee tilauksia :)
Sitä odotellessa yksi(1) 9millinen minullekkin kiitos :)
2,5mm reikä on aksiaalisessa suunnassa porattuna, ja drip-tippaamiseen jos haluaa, niin voihan sinne sen 3mm reiän tehdä jos se jotakin ihmistä kiihottaa. Soviteosaksi jos kutsut sitä osaa, joka menee kartomisaattorin sisään, niin sen tarkat mitat on 8,63mm eli se menee mm. dct, kaikki boget, ja kaikki cartot mitkä menee Arctic Tankin / DCT tankin sisään. Tämän "soviteosan" pituus on 5mm, joka on varsin vakion luokkaa ollut ainakin minun driptipeissä Liberty-flightsilta, eCigWizardilta sekä peleonilta tilattujen suhteen.
Minua ei kiinnosta jos joku ihminen valittaa siitä, että reikä on 0,5mm liian pieni, koska sen tipin saa aina pois. Päinvastoin, jos reikä on liian iso, imuvastus muuttuu erilaiseksi (joka on tällä 2,5mm minun mielestä ainakin optimi, testattu 3mm ja 3,5mm rei'illä). Ja tottakai tuohon voin porata vaikka 8mm reiän, mutta sittenhän se menisi jo niin isoksi, että luodin päästä poistuisi merkittävä osa pois, jolloin se olisi enää vaan "putki". Kiitos, lepo.
Vs: Golden 9mm bullet DRIPTIP
Just näin :D Minua kiinnosti lähinnä kiinnostuksesi UUDEN tuotteen tekemiseen, ei olemassa olevan arvosteluun liittynyt mitenkään tuo!
Näitähän on puutteita pilvinpimein hemmetti! io6 EI saa kunnollista Drip Tippiä! Ja ihan oikeasti KUNNOLLISTA Drippailuun soveltuvaa Drip Tippiä saa parilta valmistajalta maailmalla, supermanu, empire, goodsensevapor ja thats it
Oliskohan esim 9mm halkaisijaltaan olevaa rosteriputkea saatavissa? Siihen saisi tuon sovitteen höylättyä ja jos seinämävahvuus olis luokkaa 1-1,5mm, niin sehän olis siinä :D
2 Liitteet
Vs: Golden 9mm bullet DRIPTIP
10mm tangosta testi kappaleet.
Vs: Golden 9mm bullet DRIPTIP
Taitaa olla parempi avata modiketjuun uusi aihe :D TEHTY ja löytyy täältä http://www.e-savuke.com/forum/index.php?topic=2337.0
Re: Golden 9mm bullet DRIPTIP
Mulle kans tollanen! 1kpl
Vs: Golden 9mm bullet DRIPTIP
Esa vuke, anna mitat niin sorvaan sopivan.
Edit: eli siis tuo sovite on tuon 9mm luodin alapuolella oleva, koska koko tuo "patruuna" jää kuitenkin tarkoituksen mukaisesti carton ulkopuolelle näkyviin.
Vs: Golden 9mm bullet DRIPTIP
Lainaus:
Alkuperäinen postaaja
toppi
Esa vuke, anna mitat niin sorvaan sopivan.
Yakousei, tuo sovite on 9mm nallin kohdalle sinun kuvassasi, kun taas todellisuudessa "sovite" on siis ilmeisesti tuo alin osa drip-tipistä, mutta sallittakoon virhe sinun osalta. :) Peace <3
Edit: eli siis tuo sovite on tuon 9mm luodin alapuolella oleva, koska koko tuo "luoti" jää kuitenkin tarkoituksen mukaisesti carton ulkopuolelle näkyviin.
Kuvanlaatu ja sun iso peukalo :=
Re: Golden 9mm bullet DRIPTIP
Oijjoijoi!
Tämä tuote ansaitsee "must have" leiman :D
2 kpl tänne! :)
Vs: Golden 9mm bullet DRIPTIP
2 kipaletta vois tännekkin päin tulla :)
Vs: Golden 9mm bullet DRIPTIP
Vs: Golden 9mm bullet DRIPTIP
Vs: Golden 9mm bullet DRIPTIP
Vs: Golden 9mm bullet DRIPTIP
hienoa käsityötä! tuohan näyttää kun imis pienen pientä k****a :esmoke: