Woo tuli tänään ja pakko todeta että tuote on erittäin hyvä ! Makoisat höyryt ilman mitään volttien säätelyä . Lisäksi tyylikäs ulkonäkö ja käteensopiva muotoilu . Useita mehuja testattu ja täytyy sanoa , olen ihastunut :esmoke:
Printable View
Woo tuli tänään ja pakko todeta että tuote on erittäin hyvä ! Makoisat höyryt ilman mitään volttien säätelyä . Lisäksi tyylikäs ulkonäkö ja käteensopiva muotoilu . Useita mehuja testattu ja täytyy sanoa , olen ihastunut :esmoke:
Täytyy sanoa, että tässä on paras mahdollinen ensimmäinen modi. Kuukauden ollut käytössä ja se helppous ja vaivattomuus on parhaita puolia ja lisäksi vielä halpa kun mikä. Toi esmoken alotuspakkaus on varsin pätevän oloinen tosin itse käytän pikkutankkia normibogeilla (on aika paljon sulavamman näköinen) tai MDCC:ta. Ittellä ainakin noi volttilootat jääny suht vähälle käytölle, ihan vaan kun tässä on omaan käyttöön lähes kaikki tarvittava suht pienessä ja kätevässä paketissa.
tänään tuli tännekkin postissa tuollainen WOO, kattelin että tuo kaasunpurkautumis reikä pohjassa on aika pieni ja ajattelin jos porais pari milliä isommaksi, onko tästä jotain haittaa ja olenko liian vainoharhainen ?
Ainoa vika mitä oon löytänyt tästä vehkeestä, että nestettä kuluu ihan hulvattomasti. Ei silti taida olla woon vika
loistava laite tää woo (tuli tänää postissa) aivan mahtavat höyryt ja maku =) mutta ei itselläni toimi visioiden kanssa (hirveä palaneen maku ja käry ihan napin hipsullakin) ja sitten kokeilin malibu pineapplea mukana tulleeseen tankkikartoon niin seki palaneen makuista :-/ usa mix (pg) toimii ja usa mix (pg) & mustikka (vg) 50/50 sekotuksella toimii ja minttu-suklaa toimii (olikohan 50/50). tännehän vois pitää listaa millä toimii ja millä ei? nesteet ja laitteet. ainii lr ego-t b-type atolla myös palaa. silti loistava laite. alotus pakkauksen ostin ja itse laatikkokin jo huokuu laadukkuutta ;-) tykkään ja kiitokset esmokelle =)
Mistähän tän Woon sais halvimmalla hommattua?
Malibu Pineapple 3 ohmin boge lyhennetyssä DCT tankissa, toimii!
http://www.cloudsofvapor.com/store/153-5v-wow.html alennuskoodi bigbuyer toimi ainakin kuukaus sitten eli postien kans jonku 28 taalaa maksaa ja tuli noin viikos. Mut eipä näytä varastossa olevan yhtään.
Tue suomalaista! pari dollaria muille maille ei tunnu missään
+ että tulee päivässä kahdessa :)
Itse komppaan vaikka linkin laitoinkin kun kysyttiin. kk sitten ei ollu suomessa vielä saatavilla. Jos nyt tilaisin niin esmokelta ottaisin
kiitokset sib pitääkin hommata 3ohmisia =)
Minullekin tuli sitten tänään tuollainen Woo. Hieno laite, näin ensikokemusten perusteella.
Minullahan on ollut ensimmäinen modi, eli GLV-2 5V tilattuna jo yli 2kk, mutta ei ole vieläkään tullut. Hankin sitten tämän Woon kosto-ostoksena, kun oli akut ja laturi jo valmiina :D Ehkä se GLV sieltä joskus tulee.
Tämä Woo toimii kyllä mainiosti Smokin Mega DCC:n kera. Höyry on lämmintä ja makua lähtee ihan eri tavalla kuin eGo-akuilla.
Sen sijaan Kangerin 6ml mega cartoa en voi suositella tälle. Ensimmäisestä taisi käräyttää heti vastuslangan poikki ja toisella maku oli tosi palaneen makuista. :antismoke: Makuna tosin oli tuo sama Malibu Pineapple, jonka makua joku toinenkin jo harmitteli. Täytyy ehkä tunkea sitä 3ohm cartoon, jos se maku vaikka siinä kestäisi paremmin. Tavallisesta dual coilista VR:n mustikka maistui mainiolta. Egon akuilla maku jäi tosi laimeaksi.
Testailu jatkukoon. Tämän perusteella voin kyllä suositella Woo-modia niille, jotka eivät tarvitse voltti/wattisäätöä. Tyylikäskin on :)
Hintaahan tälle tuli vaivaiset 25€, kun ehdin kaappaamaan yhden KEVÄT-alennuskoodin.
Anybody kokeillut tätä Sr kangerien kanssa?
Pitihän se kokeilla. Kanger stainless 2.7 - 3.1 ohmia, nesteenä Puros Naturales ( kylläkin vähän jatkettuna VG:llä ). Karto taatusti märkä ja lopputulos: ekalla imaisulla palaneen maku, ihan niinkuin oikeastaan kaikilla muillakin, paitsi Smokin omilla tekeleillä. Saattaa olla, että teen jotain väärin, tosin en ymmärrä mitä, tai sitten vehje vaan on turhan raju, tai asia koskee vain tätä yksilöä.
WOO.. :esmoke: :esmoke: !!!
Kelpo laite, ei voi tässä vaiheessa muuta sanoa. Tai no, käyttökytkimen kalvo on hieman huono, kytkin napsahtaa ensin, mutta ei kytke. Vasta hienoinen lisävoima napsahduksen jälkeen saa höyryn liikkeelle. Ja sitä sitten tulee, ei ole amerikanmaan käyttäjänsuojelurajoittimia tässä... :P
Akkuina käytin jotakuinkin täyteen ladattuja uudehkoja Made in China Rechargeable ICR16340 Special Lithium Battery tuotteita, jotka mitä ilmeisimmin ovat suojaamattomia. Huh huh, toivottavasti ECF ei huomaa että täällä höyrytään suojaamattomilla ja stacked batteries putkimodilla vielä... :P
Laitteen regulointi on PWM noin 800Hz taajuudella. Huippujännite ilman kuormaa on luonnollisestikin akkujen jännite, minun tapauksessani 8.27V. Pulssisuhde ilman kuormaa oli 62.5%.
Kuormina käytin tehovastuksia cartojen resistanssivaihtelun takia. Tällä hetkellä tarkka STD (3 ohmia) arvo oli hukassa, joten ensimmäinen mittaus on lievällä ylivastuksella.
3.3 Ω
- Vpp 7.4V
- Duty 60.1%
= 10W
= vastaa 5.7V tasajännitettä
2.2 Ω
- Vpp 7.04V
- Duty 61.4%
= 13.8W
= vastaa 5.5V tasajännitettä
1.5 Ω
- Vpp 6.6V
- Duty 60%
= 17.4W
= vastaa 5.1V tasajännitettä
Lukemat hieman elävät ajan kanssa, mutta koska useissa mittalaitteen pysäytyskuvissa oli saman suuntaisia arvoja, yhdet niistä on kirjattu muistiin eikä keskiarvoja ole viitsitty ryhtyä laskemaan, turhaa se oikeastaan olisikin.
Ja kaavat ovat, jos ketä kiinnostaa:
P = U2 / R * Duty
URMS = sqrt( P * R )
No toi selittääkin miksi se sun mittarisi näytti 7,8 voltta, ei sitten tosin antanut lukemaa ulos kuormalla.
Joo, äsken kokeilin itsekin ensimmäisen kerran WOOta sellaisella mittarilla, ja se tosiaan ei ole PWM yhteensopiva. Sellaisenaan tulos oli sama kuin sinulla, näyttää jotain muttei oikein, ja kuormalla ei mitään. Kun mittariin laittaa oman jännitelähteen, niin tilanne menee vielä huonommaksi. Ilman kuormaa voltit ovat hiukan päälle 5 ja vilisevät, ja totuus on kaukana. Kuorman kanssa lukemat ovat erittäin mitä sattuu, ja vilisevät hullun lailla. Erityisesti tavallisten yleismittareiden kanssa tilanne on vieläkin kertaluokkaa huonompi, kun lukemat muka näyttävät oikeilta, mutta eivät ole sinne päinkään. Siksi on parempi, että esim. LiPo volttinäyttö vilkkuu kun tuloksiin ei voi luottaa. Toisaalta sitten, kun PWM taajuus nousee tarpeeksi korkealle, niin moni näyttö näyttää "jotakin", vaikka parempi olisi vaan vilkuttaa... :P
Mikäs tää on?
http://translate.google.com/translat...tbb=1&ie=UTF-8
Siis erooko toi jotenkin noista peruskartoista ja tankeista teidän viisaampien mielestä?