Näköjään se litkuun uppoava pää meshistä kannattaa todellakin leikata ~45% kulmalla viistoksi, ainakin omassa värkissä ero aikaisempaan huomattavasti parempaan suuntaan.. :esmoke:
Printable View
Näköjään se litkuun uppoava pää meshistä kannattaa todellakin leikata ~45% kulmalla viistoksi, ainakin omassa värkissä ero aikaisempaan huomattavasti parempaan suuntaan.. :esmoke:
Tänään taisi olla tähdet kohdillaan, sillä sain tehtyä käärittyä mesh wickin ja vastuksen toimintakuntoon noin 15 minuutissa Orioniin. :D
Eipä ole tarvinnut ihmeemmin harjoitella, paisi ensimmäisenä ilta, jolloin tuli käärittyä lähemmäs 10 wickiä.
Joltain foorumilta tuli napattua sellainenkin pikku vinkki wickin eristämiseen kuin PTFE-teippi eli kotoisesti putkimiehenteippi. Tuolla saa ainakin Orionissa varmistettua sen, että wick ei johda. Testattu toimivaksi. Pitää vain muistaa ettei jätä tuota teipin pätkää liian ylös ettei ota vastukseen kiinni...
Itse hapetin hartaasti ja huolella mitaten vastukset sekä päistä, että parista kohtaa väliltä.
Kuinka syvälle työnnätte wickin tankkiin?
Tarkalleen pohjaan asti? Pari milliä pohjasta irti? Vai oikeen sykkyrälle tankin uumeniin?
Tarvii saada imee kunnolla, joten mieluusti ei ihan pohjaan kiinni edes viisteellä.
Outoa.. jotenkin olen saanut näistä kuvan, että kestävät hyvin käyttöä kunhan setupin saa sopivasti kasaan..
Mulla toimi todella hyvin noin 2pv ja nyt tuntuu maku ja höyryntuotto todella surkealta, vaikka vaihtaa uudet akut ja nojaa nappiin niin ei edes puske palaneen makua. Nihkeetä touhua ja boget taas käytössä.. odottelen inspiraatiota uuden wickin väsäämiseen. :esmoke:
Yleensä tuo ei ole wickkista kiinni vaan vastuksesta, wick kestää pitkään mutta vastukset voi kikkailla. Pieni liikuttelu kontakteissa esim voi saada coilin skulaamaan taas kuten pitää, kannattaa kokeilla mittarilla millasta vastusta tarjoaa ja hiukka liikutella ja räpläillä niin kyllä se siitä taas lähtee.
Ei sattunut olemaan yleismittaria käsillä, mutta kick ja volttinäyttö näytti samaa kuin silloin toimiessaankin vielä hyvin.. eli 3,7V ja muistaakseni kick säädetty johonkin 7-8W kieppeille. Tostahan jo laskisi vastuksen, mutta eipä sillä ole enää väliksi kun langan ropelsin osittain uusiksi, ilman parempaa lopputulosta.
Pitää ottaa uutta lankaa.. sitten kun boge-tankit imetty tyhjiksi ja kiinnostusta löytyy enemmän.
ilmoitelkaas tännepäin sittenkun löydätte sopivan langan jne, niin tiedän mitä lankaa tilata suomi modiin (rst, mechanic, teleskooppi, korjattava ato-tankki 5-6ml).
yhen aton oon väsäilly eikä toi mun mielestä mitenkää älyttömän vaikeeta ollu, toimii paremmin ku hyvin.
thanks.
Ehdottomasti buymywiren .2, saa sopivasti vastusta yksiakkuiseen.
Minkälaisia vastuksia teidän setupeista tulee?
Mulla on nyt ilmeisesti 0,3 kanthalia ja 6 - 7 kierrosta, mutta vastus silti vain 1,2 ohmia! Meniköhän tossa joku vikaan?
Moni kehuu esim 0,22 kanthalia, mutta enhän mä voi ohuempaan vaihtaa ku sit tippuu ohmit jo alle yhden... EDIT: ohuempaanhan se pitää vaihtaa jos haluaa vastusta nostaa.
ohuempi = isompi vastus
:) A1 ja D:n ero on oikeastaan aika pieni ero lämmönkestossa. Tuo a1 on se kestävin ja loppujen lopuksi käytössä eron kyllä huomaa, ei pala poikki ja kestää attyssa paljon kauemmin kuin muut laadut. Listojen mukaan Kanthal ei muka ole tehnyt .20 A1:sta mutta kyllä sitä on myynnissä joka puolella, joku virhe listoissa. Ohuella voi sitten kokeilla matalampaa vastusta niin että laitaa 2-3 lankaa kierrettynä yhteen taikka tekee .15 langasta kahden langan rinnakkaisen dual coilin jolloin mennään siellä alle ohmissa mutta höyry on aika huikea :D ei muuten kick tykkää yhtään .30 langasta :D
No nyt alkaa tulla lisää kysymyksiä:
1. Palaako näissä korkeampiohmiset vastukset helpommin? Ohuempi lanka siis silloin kyseessä, mutta cartoissa LR versiot tuntuu olevan herkempiä ja se vähän hämmentää.
2. Mites toi dual coil käytännössä tehdään? Langat ei ilmeisesti saa koskettaa wickin ympärillä toisiaan, mutta päistäkö ne voi olla yhdessä?
3. Jos esim. Punoo 0,15 lankaa kaksinkerroin, niin vastaako se 0,3 lankaa vai pienempää?
4. Kannattaako lanka polta sytkärillä kerran kaks hehkuvaksi ennen kieputtamista ja mihin se oikein vaikuttaa?
5. Jos haluaa vaihtaa lankaa, niin onko silloin syytä kääriä uusi wick, vai kannattaako hyödyntää vanhaa?
LR cartoissa mennään niin paljon isommilla tehoilla että palaminenkin on helpompaa, ohut lanka kyllä kestää koska toteutunut energian määrä on suhteessa samankaltainen.
Kun tekee tuon dualin niin langat ei tosiaan saa koskea wickkilla toisiaan mutta ovat päistä yhdessä, otat kaksi lankaa ja kiedot puoli senttiä kummastakin päästä yhteen, siirrät muuten langat irti toisistaan ja sitten varovasti kierittämään, on itseasiassa yllättävän helppoa.
periaatteessa kaksi .15 lankaa vastaa .30 lankaa mutta käytännössä ei koska pinta-ala joka tehokkaasti toimii lämmön siirtoon ei ole ihan sama, jossain oli venäläisten tekemä kaavio aiheesta mutten nyt kuollaksenikaan muista miss :D
Et ole kyllä jalippo ainut kuka luuli, että paksumpi lanka tarkoittaa isompaa vastusta. Sillä paksummalla langalla tuhosin yhden egon, kun ekaa kertaa testailin tuleeko höyryä.