-
The Double Cross Clone Mechanical Mod $18.99, free shipping. This mod is made from brass and powered by 1 x 18650 battery. The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the Double Cross mod.
http://www.3fvape.com/98442-home_def...-1-x-18650.jpg
The Spectrum Mechanical Mod Clone $18.99, free shipping. The Spectrum clone Mechanical Mod is made from brass and powered by 1 x 18650 battery. The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the Double Cross mod.
http://www.3fvape.com/98457-home_def...-1-x-18650.jpg
The Stealth Mechanical Mod Clone $18.99, free shipping. The Stealth clone Mechanical Mod is made from brass and powered by 1 x 18650 battery. The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the Double Cross mod.
http://www.3fvape.com/98482-home_def...-1-x-18650.jpg
Comp Lyfe HK Diamond Knurl 25mm Mechanical Mod Clone $21.99, free shipping. The Complyfe HK Knurled style mod is with 25mm battery tube. It is with simple design with a fixed 510 hybrid top to improve conductivity. There are 9 vent holes throughout the mod to keep your battery cool and in case of venting
http://www.3fvape.com/98487-home_def...-1-x-18650.jpg
Taiji clone Mechanical Mod $23.99, free shipping. The Taiji Style Mechanical Mod is constructed from copper and powered by 1 x 18650 battery. There is no positive pin, so the atomizer will connect to the battery directly.
http://www.3fvape.com/98492-home_def...-1-x-18650.jpg
Original Smoant Battlestar 200W TC Box Mod $42.99, free shipping. The Authentic Smoant Battlestar 200W TC Box Mod supports maximum output wattage up to 200w, powered by 2 x 18650 batteries (not included). The 200W mod supports resistance as low as 0.05 ohm under temperature control mode. TC supports NI200, TI, SS, TCR output. The temperature control range from 100'C to 300'C, never have dry hit, brings vapers better vaping experience. The front of Smoant battlestar is with bright and clear OLED screen, shows the vaping information easily.
http://www.3fvape.com/98663-home_def...-2-x-18650.jpg
TFMT RTA Clone $17.99, free shipping. The TFMT Style RTA is with incredible flavor, but it is also made for the cloud chaser. The huge build deck and generous juice channels means it can handle series coils and high power. This truly is a dripper experience in a tank. The Top-Flow Mega Tank is with a quad-post deck, Top filling system and a shorter profile.
http://www.3fvape.com/98500-home_def...m-diameter.jpg
Thanatos RDA Clone $10.59. The Thanatos Style RDA is constructed from stainless steel and in 24mm diameter. The RDA is with dual-pole Velocity style Deck design. The RDA supports airflow control from bottom, side and top. The Thanatos Style RDA comes with wide bore drip tip and 510 drip tip adapter.
http://www.3fvape.com/98613-home_def...m-diameter.jpg
Split Atty RTA Clone $10.79. The Split Atty Style RTA is a rebuildable tank atomizer features 22mm diameter and 2ml e-juice capacity. The Split Style RTA is constructed from 316 Stainless Steel and Glass. Comes with dual post deck, big build room, this Split Style RTA will bring you a good vaping experience!
The Split RTA comes without bottom feeder pin and baffle. The Split Atty RTA is recommended to use with box mod due its 510 thread is a little short.
http://www.3fvape.com/98628-home_def...m-diameter.jpg
SXK Petri RTA Clone $21.90, free shipping. The SXK Petri Style RTA is with postless deck design to allow for easy building and cleaning of the beautiful 4 x plated gold plated finish. The post clamps on the RTA use wide clamping holes to fit complex and large builds, while maintaining an easy to wick design.
http://www.3fvape.com/98636-home_def...m-diameter.jpg
The Double Cross Mechanical Mod Clone + Battle RDA Clone Kit $25.99, free shipping. The Double Cross Style Mechanical Mod is made from brass and powered by 1 x 18650 battery. The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the Double Cross mod.
The Complyfe Battle style RDA is constructed from stainless steel triple-post deck, brass top cap and stainless steel drip tip.
http://www.3fvape.com/98397-home_def...-1-x-18650.jpg
The Spectrum Cross Mechanical Mod Clone + Battle RDA Clone Kit $25.99, free shipping. The Spectrum Style Mechanical Mod is made from brass and powered by 1 x 18650 battery. The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the Double Cross mod.
The Complyfe Battle style RDA is constructed from stainless steel triple-post deck, brass top cap and stainless steel drip tip.
http://www.3fvape.com/98412-home_def...-1-x-18650.jpg
The Stealth Cross Mechanical Mod Clone + Battle RDA Clone Kit $25.99, free shipping. The Stealth Style Mechanical Mod is made from brass and powered by 1 x 18650 battery. The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the Double Cross mod.
The Complyfe Battle style RDA is constructed from stainless steel triple-post deck, brass top cap and stainless steel drip tip.
http://www.3fvape.com/98427-home_def...-1-x-18650.jpg
Authentic Smoant Knight V2 80W TC VW Variable Wattage Mod + Talos V1 Tank Kit $49.99, free shipping. The Authentic Smoant Knight V2 kit is the upgraded version of Knight V1, lightweight and with compact size. The Smoant Knight V2 Mod supports the atomizer with maximum diameter up to 23.5mm and can control the airflow conveniently. The Knight V2 mod supports maximum wattage output up to 80 watts and supports resistance as low as 0.1 ohm. The mod is with large OLED screen, very convenient to use. The new Smoant vape kit is powered by 1 x 18650 battery, with magnetic back cover, easily replace battery. The standard micro USB port allow vapers charging the battery directly, but better use battery charger.
The Talos V1 tank can hold 4.5ml e-juice, with top refill design, bottom with big airflow adjustable slots, vapers can inject e juice and adjust the airflow to your preference easily. The Smoant temperature control vape kit support Ni200, Ti, SS, NIchrome and TCR output modes.
http://www.3fvape.com/98672-home_def...-1-x-18650.jpg
Authentic IJOY Limitless Lux 215W Mod Replacement Sleeve $17.39, free shipping Authentic IJOY replaceable sleeve is suitable for Limitless Lux 215W box Mod. Get one to made your mod different.
http://www.3fvape.com/98506-home_def...n-aluminum.jpg
Stainless Steel Drip Tip for Aspire Nautilus X Clearomizer $1.99. The special drip tip is made from stainless steel with 14mm length and 11.6mm diameter. This drip tip is suitable for Aspire Nautilus X Clearomizer.
http://www.3fvape.com/98644-home_def...ilver-14mm.jpg
Authentic Mighty Dynamic Armor Dragon Resistance Wire $10.99. For building your own RDA RTA RBA, Ni80 and 316 stainless stell available
http://www.3fvape.com/98656-home_def...-1529ohm-m.jpg
-
IDA Concept RDA Clone $21.99, free shipping. The IDA Concept clone RDA is constructed from 316 stainless steel and in 24mm diameter. The RDA supports airflow control from the top cap. The RDA kits comes with dual coil deck (pre-installed) and single coil deck for replacement. The product box is also a building deck for all 510 atomizers.
SJMY AP Vector RDA Clone $17.99, free shipping. The SJMY AP Vector clone RDA is established on the basis of the tank Nectar, but with significant changes in the design for a dripper vape and a more rapid change of tastes and different amounts. Dripper completely disassembled for ease of maintenance and washing. The tank holds about 1.4mL juice for 30~40 drops.
Battlefield Mechanical Mod Clone + Battle RDA Clone Kit $26.99, free shipping. The Battlefield clone Mechanical Mod is made from brass and powered by 1 x 18650 battery. The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the Battlefield mod.
The Complyfe Battle clone RDA is constructed from stainless steel triple-post deck, brass top cap and stainless steel drip tip.
Replacement PEI Tank for iDA Concept Style RDA $7.29 The Replacement PEI Tank is designed for iDA Concept clone RDA. There are dual air slot in the bottom and supports 510 drip tip.
-
VGOD Pro Mechanical Mod Clone - Brass $21.99, free shipping. Constructed of durable brass and treated with a durable matte black coating. 24mm diameter perfect for 24mm RDAs
http://www.3fvape.com/98809-cart_def...-1-x-18650.jpg
VGOD Pro Mechanical Mod Clone - Copper $21.99, free shipping. Constructed of durable copper and treated with a durable matte black coating. 24mm diameter perfect for 24mm RDAs
http://www.3fvape.com/98810-cart_def...-1-x-18650.jpg
Kindbright TimeKeeper Time Keeper V2 Mechnical Mod Clone $23.99, free shipping. This mod is made from brass, comes with adjustable brass bottom-fire button with opposing earth magnet. Come in silver, black and golden in color.
http://www.3fvape.com/98811-cart_def...-1-x-18650.jpg
Original Ceravape Cerabis 44 Ceramic Sub Ohm Tank $22.99, free shipping. 2.0mL, 0.5 Ohm, 22mm Diameter. Includes a hidden airflow control that is incorporated into the top-fill mechanism. With coil cleaning function, you can take the coil out for cleaning. The Ceravape Cerabis 44 is used 100% Food Grade Nanometer ceramic coils and containing a vertical ceramic coil and top-fill method with an e-liquid capacity of 2ml.
http://www.3fvape.com/98767-cart_def...m-diameter.jpg
Original Ceravape Cerabis 45 Ceramic Sub Ohm Tank $23.59, free shipping. 2.5mL, 0.5 Ohm, 22mm Diameter. Includes a hidden airflow control that is incorporated into the top-fill mechanism. With coil cleaning function, you can take the coil out for cleaning. The Ceravape Cerabis 45 is used 100% Food Grade Nanometer ceramic coils and containing a vertical ceramic coil and top-fill method with an e-liquid capacity of 2.5ml.
http://www.3fvape.com/98781-cart_def...m-diameter.jpg
VGod TrickTank Pro RDTA Clone $13.99. Large dual post design for dual coil installation. Color in silver, golden and black. Features a 4mL capacity tank with a convenient side fill hole & large dual airflow channels that feed directly towards the coils for a constant and direct coil airflow providing Maximum Flavor and Vapor Production.
http://www.3fvape.com/98803-cart_def...m-diameter.jpg
Comp Lyfe HK Diamond Knurl 25mm Mechanical Mod Clone + Mini Battle RDA Clone Kit $27.99, free shipping. 25mm battery tube, 9 vent holes for cooling. The Mini Battle RDA Clone comes with triple post design and is a great match with the HK 25 Clone.
http://www.3fvape.com/98818-cart_def...-1-x-18650.jpg
Original Ceravape Cerabis 44 / 45 Nanometer Ceramic Coil $13.99 0.5 Ohm, 40~60W, 4 PCS pack. The coil is compatible with the new Cerabis 44 and 45 tank. The coils features a solid core, food grade ceramic core embedded with a vertically orientated heating element. Each ceramic core consists of high strength nanometer ceramic, and features a 100% ceramic construction for the wicking element.
http://www.3fvape.com/98822-cart_def...060w-4-pcs.jpg
Original Demon Killer 7-in-1 28 PCS Coil + Allen Key Violence Coil Kit $11.99 The kit comes with 1 x Allen Key, 4 x Alien V2 coils, 4 x Tsuka Coils, 4 x Clapception Coils, 4 x Framed Clapton Coils, 4 x Spaced Clapton Coils, 4 x Tri-twisted Clapton Coils, 4 x Staple Staggered Fused Clapton Coils, and an Allen Key.
http://www.3fvape.com/98826-cart_def...less-steel.jpg
Original Demon Killer Framed Clapton Coil $5.99 The Original Demon Killer Framed Clapton Coil is made from Kanthal A1 and 316L stainless steel and comes with an Allen Key. The coil is with 0.26 ohm resistance and 10 PCS pack.
http://www.3fvape.com/98835-cart_def...ohm-10-pcs.jpg
Original Demon Killer Clapception Coil $5.99 The Original Demon Killer Clapception Coil is made from Kanthal A1 and 316L stainless steel and comes with an Allen Key. The coil is with 0.35 ohm resistance and 10 PCS pack.
http://www.3fvape.com/98840-cart_def...ohm-10-pcs.jpg
Original Demon Killer Tri-Twisted Clapton Coil $5.99 The Original Demon Killer Tri-Twisted Clapton Coil is made from Kanthal A1 and 316L stainless steel and comes with an Allen Key. The coil is with 0.35 ohm resistance and 10 PCS pack.
http://www.3fvape.com/98845-cart_def...ohm-10-pcs.jpg
Original Demon Killer Spaced Clapton Coil $5.99 The Original Demon Killer Spaced Clapton Coil is made from Kanthal A1 and 316L stainless steel and comes with an Allen Key. The coil is with 0.35 ohm resistance and 10 PCS pack.
http://www.3fvape.com/98850-cart_def...ohm-10-pcs.jpg
Original Demon Killer Staple Staggered Fused Coil $5.99 The Original Demon Killer Staple Staggered Fused coil is made from Kanthal A1 and 316L stainless steel and comes with an Allen Key. The coil is with 0.3 ohm resistance and 10 PCS pack.
http://www.3fvape.com/98855-cart_def...ohm-10-pcs.jpg
Original Demon Killer Tsuka Coil $5.99 The Original Demon Killer Tsuka coil is made from Kanthal A1 and 316L stainless steel and comes with an Allen Key. The coil is with 0.25 ohm resistance and 10 PCS pack.
http://www.3fvape.com/98860-cart_def...ohm-10-pcs.jpg
Original Demon Killer Alien V2 Coil $5.99 The Original Demon Killer Alien V2 coil is made from Kanthal A1 and 316L stainless steel and comes with an Allen Key. The coil is with 0.25 ohm resistance and 10 PCS pack.
http://www.3fvape.com/98865-cart_def...ohm-10-pcs.jpg
-
-
-
Original Artery Nugget V2 50W 1500mAh Box Mod $29.99, most countries free shipping. Artery Nugget V2 is the smallest 50W box mod in the market. It is constructed from zinc alloy
http://www.3fvape.com/99437-cart_def...alloy-550w.jpg
Complyfe Vortex Mechanical Mod Clone $23.99, most countries free shipping. The Complyfe Vortex clone Mechanical Mod is constructed from brass with silver plating and powered by 1 x 18650 battery.
http://www.3fvape.com/99453-cart_def...-1-x-18650.jpg
VIRUS RDA Clone $11.99 The VIRUS clone RDA is constructed from stainless steel and in 24mm diameter. The RDA is with Kennedy clone bottom airflow. the Virus clone RDA is with dual stainless steel clamps with gold plated posts.
http://www.3fvape.com/99485-cart_def...m-diameter.jpg
Original SMOKTech TFV8 Big Baby Sub Ohm Tank $23.99, most countries free shipping. 5mL, 0.15 Ohm, 24.5mm Diameter, bigger e-juice capacity and more vapors will let you enjoy pleasant vaping time.
http://www.3fvape.com/99478-cart_def...m-diameter.jpg
Original Artery Nugget V2 50W + Trace Sub Ohm Tank Starter Kit $42.99, free shipping for most countries. The Nugget V2 Kit by Artery come with Nugget V2 50W TC Mod and Trace Sub Ohm Tank.
http://www.3fvape.com/99449-cart_def...-550w-20ml.jpg
Replacement Drip Tip for GeekVape Griffin 25 / Mini $3.99 The drip tip is suitable for GeekVape Griffin 25 Standard Version / Top Airflow Version and Griffin 25 Mini RTA.
http://www.3fvape.com/99459-cart_def...esin-161mm.jpg
Replacement Drip Tip for IJOY Limitless Plus RDTA $4.69 The drip tip is suitable for IJOY Limitless Plus RDTA. The resin drip tip will be shipped in random color (one piece will be shipped).
http://www.3fvape.com/99462-cart_def...resin-15mm.jpg
Replacement Drip Tip for 25mm RDA $6.99 The Replacement Drip Tip is suitable for 25mm RDA. The resin drip tip will be shipped in random color (one piece will be shipped).
http://www.3fvape.com/99465-cart_def...resin-15mm.jpg
Replacement Honeycomb Drip Tip for Council of Vapor Vengeance Atomizer $3.99 The honeycomb shield is attached to the bottom of the resin drip tip to prevent spit back. The resin drip tip is suitable for Council of Vapor Vengeance Atomizer.
http://www.3fvape.com/99468-cart_def...resin-16mm.jpg
-
Lost Vape Triade Triple DNA200 - Black PU $129.99, free shipping for most countries. 1~200W, 3 x 18650, DNA200 chip
http://www.3fvape.com/99565-cart_def...-3-x-18650.jpg
Cleaning Tool / Brush for RDA Coil $1.99 The cleaning tool / brush is perfect for RDA Coil. The highly attractive clean performance, prevent and clean the carbon deposition and the greasy dirty on the coil. It is great for healthy vaping.
http://www.3fvape.com/99593-cart_def...less-steel.jpg
Stabilized Wood 510 Drip Tip $5.59 This 510 drip tip is made from stabilized wood and stainless steel. It features a 15.5mm length. The stabilized wood material will offer this 510 drip tip a long life span. There are 4 different colors and will be shipped by random color (only one piece).
http://www.3fvape.com/99587-cart_def...teel-155mm.jpg
Wide Bore Drip Tip for CoilArt MAGE RTA $4.99 The wide bore drip tip is suitable from CoilArt MAGE RTA atomizer. The drip tip is made from Resin, with hollow center, this wide bore drip tip will bring you good vaping experience! This drip tip will be shipped by random color (only one piece)!
http://www.3fvape.com/99580-cart_def...m-diameter.jpg
Replacement Drip Tip / Top Cap for 24mm 528 Goon RDA $7.99 The resin drip tip top cap is suitable for 24mm diameter 528 Goon RDA. The drip cap is in 24mm diameter and 8mm bore diameter.
http://www.3fvape.com/99573-cart_def...m-diameter.jpg
-
-
-
-
-
Original Lost Vape SKAR DNA75 TC Box Mod $95.99, free shipping for most countries. The Lost Vape SKAR has a retro body but a powerful Evolv DNA75 chipset. The SKAR mod supports either a 26650 cell or 18650 cell
http://www.3fvape.com/100242-home_de...8650-26650.jpg
http://www.3fvape.com/100237-home_de...8650-26650.jpg
The Proto RTA Clone $14.99 The Proto clone RTA is a small format tank with a 4.5mL capacity, postless deck and top wicking design.
http://www.3fvape.com/100097-home_de...m-diameter.jpg
Odeon V2 RDA Clone $13.99 The Odeon V2 clone 22mm flavor chasing atty RDA features a ceramic exterior coat to give maximum heat insulation and protection from wear and tear. Adjustable airflow for single or dual coil builds. The RDA is made from 316 stainless steel.
http://www.3fvape.com/100152-home_de...m-diameter.jpg
316 Stainless Steel Tokugawa RDA Clone $12.99 The Tokugawa clone RDA features a unique Cross Post design for center coil configuration. The RDA is designed with adjustable bottom and side airflow for optimal flavor and cloud production. A bottom airflow seal cap is included for those who enjoys dedicated side airflow configuration. This RDA is constructed from 316 stainless steel.
http://www.3fvape.com/100154-home_de...m-diameter.jpg
SXK Vario RTA Clone $13.99 The SXK Vario clone RTA is constructed from stainless steel and PC tank with about 2.2mL e-liquid capacity. The RTA is with top filling system and fixed air hole (Middle of mouth to lung and directly lung).
http://www.3fvape.com/100166-home_de...m-diameter.jpg
LA RDA Clone $9.99 LA clone RDA is a 24mm, three-piece, Atty constructed of stainless steel. The deck is built in block clone, gold plated positive T-post in a direct cut straight into the minus U-pillar. The lower air flow in RDA is in a 5.5 mm juice well to prevent leakage. Coming with a 510 Delrin adapter, and mud cap.
http://www.3fvape.com/100172-home_de...m-diameter.jpg
Goon Mechanical Mod Kit Clone $19.99, free shipping for most countries. The Goon clone Mechanical Mod Kit is combined from a Copper Goon clone mechanical mod and a 22mm Goon clone RDA with wide bore drip tip. The mechanical mod is wrapped with carbon fiber for better heat dissipation.
http://www.3fvape.com/100189-home_de...-1-x-18650.jpg
Dual-Pole Battle Deck for Rebuildable Atomizer $6.99 The replacement battle dual-post deck is suitable for rebuildable atomizers. It features 20mm diameter and dual-post design for single coil build. Please be careful when you want to build dual coils, It needs more vaping experiences and professional knowledge.
http://www.3fvape.com/100235-home_de...m-diameter.jpg
-
AV Avid Lyfe M1P5 Mechanical Mod Clone $17.99 AV Avid Lyfe M1P5 clone Mechanical Mod is made from aluminum (battery tube) and brass (fire button and top cap). The mechanical mod is powered by 1 x 18650 battery and with magnet fire button.
http://www.3fvape.com/100362-home_de...-1-x-18650.jpg
Original Murdex Lava-D RDA $25.90 The Original Murdex Lava-D RDA is the top functional RDA atomizer, with dual heating wire coils. It supports three different modes of heating, which adapts single A, single B, Dual A&B. It is the best product for your choice, the innovation will bring you the unparalleled vaping experience.
http://www.3fvape.com/100343-home_de...m-diameter.jpg
Petri V3 RDA Clone $10.69 The Petri clone RDA is constructed from stainless steel and in 22mm diameter. The RDA is with dual-pole design and adjustable airflow control.
http://www.3fvape.com/100326-home_de...m-diameter.jpg
Original Innokin CoolFire4 IV TC100 3300mAh VW Mod + iSub V Clearomizer Starter Kit $57.99 The Innokin CoolFire4 TC100 is powered by the Ultra-fast advanced AETHON chipset with 100W of pure power with ClearWave noise cancellation technology.
http://www.3fvape.com/100370-home_de...-6100w-3ml.jpg
Original SMOKTech SMOK Brit Sub B2 Core Coil Heads $9.99 3 PCS pack, 0.4ohm. Original SMOKTech Brit Sub B2 Core 0.4 Ohm is compatible with Brit Mini Flavor Tank. SMOK B2 core is in 0.4 ohm and works under 20~50W to produce massive cloud of vapor and rich taste. It fits SMOK Brit mega kit tank and Osub plus kit.
http://www.3fvape.com/100352-home_de...050w-3-pcs.jpg
Original SMOKTech SMOK Brit Mini BM2 Core Coil Heads $13.99 5 PCS pack, 0.6ohm, 1.2ohm available. Original SMOKTech Brit Mini BM2 Core 0.6 Ohm/1.2 Ohm is compatible with Brit Mini Flavor Tank. It is your best Cloud & Flavor Mate. The 0.6 ohm coil works with 15~25W and the best wattage is 20W. The 1.2 ohm coil works with 15~35W and the best wattage is 25W.
http://www.3fvape.com/100350-home_de...525w-5-pcs.jpg
-
Dotmod Petri Sub Ohm Tank Clone $14.99, The Tank measures 22mm in diameter and the juice reservoir capacity is 1.9 milliliters, convenient refilled by a threaded top-fill mechanism.
http://www.3fvape.com/100526-home_de...m-diameter.jpg
Petri Sub Ohm Tank Replacement Coil Heads (10 PCS) $14.99,
http://www.3fvape.com/100524-home_de...ohm-10-pcs.jpg
VapeThink Super Clapton Kanthal A1 Pre-coiled Wire $3.99, 10pcs pack. Kanthal A1 26 GA x 2 + (0.14 x 1mm Flat Loose) and in 0.6 ohm.
http://www.3fvape.com/100453-home_de...ose-10-pcs.jpg
VapeThink Bird's Nest Kanthal A1 Pre-Coiled Heating Wire $4.79, 10pcs pack. The wire is constructed from kanthal A1 24 GA x 3 + (26 GA + 32GA) and in 0.2 Ohm.
http://www.3fvape.com/100458-home_de...2ga-10-pcs.jpg
Vapethink Taiji Kanthal A1 Pre-coiled Heating Wire $3.99, 10pcs pack. The wire is constructed from kanthal A1 (28 GA + 38 GA) + 26 GA and in 0.45 Ohm.
http://www.3fvape.com/100462-home_de...-ga-10-pcs.jpg
Vapethink Juggernaut Kanthal A1 Pre-coiled Wire for RBA $4.49, 10pcs pack. The wire is constructed from kanthal A1 (28 GA + 32 GA) x 2 + (0.1 x 0.5mm Flat) and in 0.55 Ohm.
http://www.3fvape.com/100465-home_de...lat-10-pcs.jpg
VapeThink Kanthal A1 Clapton Pre-coiled Heating Wire $3.49, 10pcs pack. Kanthal A1 Clapton 24GA + 30GA wire
http://www.3fvape.com/100468-home_de...-ga-10-pcs.jpg
Vapethink Super Juggernaut Kanthal A1 Pre-coiled Wire $4.59, 10pcs pack. The wire is constructed from kanthal A1 (28 GA + 32 GA) + 24 GA + (0.1 x 0.5mm Flat) and in 0.35 Ohm.
http://www.3fvape.com/100476-home_de...lat-10-pcs.jpg
Vapethink Staircase V2 Kanthal A1 Pre-coiled Heating Wire $3.99, 10pcs pack. The wire is constructed from kanthal A1 (24 GA + 32 GA) + (28 GA + 32GA) and in 0.7 Ohm.
http://www.3fvape.com/100481-home_de...2ga-10-pcs.jpg
Vapethink Staircase Kanthal A1 Pre-coiled Heating Wire $3.49, 10pcs pack. The wire is constructed from kanthal A1 (24 GA + 24 GA) + 32 GA and in 0.3 Ohm.
http://www.3fvape.com/100486-home_de...-ga-10-pcs.jpg
VapeThink Kanthal A1 Twisted Coil $2.49, 10pcs pack. Multic ohm available with different AWG wire.
http://www.3fvape.com/100491-home_de...ohm-10-pcs.jpg
VapeThink Ni200 Pre-coiled 28 GA Heating Wire $1.99, 10pcs pack. This Ni200 wire features 0.15 ohm resistance and will be very convenient when you use RBA atomizer.
http://www.3fvape.com/100509-home_de...ohm-10-pcs.jpg
VapeThink Kanthal A1 Pre-coiled Resistance Heating Wire $1.99, 10pcs pack. 24GA, 26GA, 28GA available.
http://www.3fvape.com/100512-home_de...-ga-10-pcs.jpg
Vapethink Staggered Fused Kanthal A1 Pre-coiled Wire $4.59, 10pcs pack. The wire is constructed from kanthal A1 (26 GA + 30 GA) + 24GA= + 32 GA Loose and in 0.4 Ohm.
http://www.3fvape.com/100540-home_de...ose-10-pcs.jpg
Vapethink Half Staggered Kanthal A1 Pre-coiled Wire $4.59, 10pcs pack. The wire is constructed from kanthal A1 26 GA + 32 GA + 24GA=32 GA Loose and in 0.3 Ohm.
http://www.3fvape.com/100535-home_de...ose-10-pcs.jpg
-
Triad RDA Clone $10.99 Triad 3 Point Post Design, 24mm diameter. The Triad Style RDA features three side airflow inlets (one for each posts coil) which can be adjusted and can be fine-tuned based on user preference. The Triad RDA is topped with a heat resistant, wide bored Delrin drip tips to minimize any heat transfer to your mouth.
http://www.3fvape.com/100589-home_de...m-diameter.jpg
GT III RTA Clone $17.99 5mL, 23.6mm Diameter. The Taifun GT III style RDA is with Top-fill System and 5ml capacity made of high quality stainless steel with glass insert.
http://www.3fvape.com/100601-home_de...m-diameter.jpg
GVMP RDA Clone $9.99 The GVMP clone RDA features 24mm diameter and Kennedy 24 Dual-pole deck. The GVMP RDA is with the same airflow control as the Kennedy 24.
http://www.3fvape.com/100606-home_de...m-diameter.jpg
TFMT RTA Clone $18.99 The TFMT clone RTA is with incredible flavor, but it is also made for the cloud chaser. The huge build deck and generous juice channels means it can handle series coils and high power. This truly is a dripper experience in a tank. The Top-Flow Mega Tank is with a quad-post deck, Top filling system and a shorter profile.
http://www.3fvape.com/100630-home_de...m-diameter.jpg
VGOD Pro Mechanical Mod Clone + VGod TrickTank Pro clone RDTA Kit $26.99 The VGOD PRO clone MECH MOD is constructed of durable brass and treated with a durable matte black coating. The mod is featured a 24mm Diameter, advanced button construction. The TRICKTANK PRO clone RDTA Features a Large Dual Post RDTA clone rebuildable deck for easy dual coil installation.
http://www.3fvape.com/100633-home_de...m-diameter.jpg
-
Original Tesla Touch 150W TC Box Mod $68.99 Tesla Touch 150W TC features such as compact in size, large 2.4 IPS screen, multi-functions. Touch screen as touch phone for different funtions.
http://www.3fvape.com/100749-home_de...-2-x-18650.jpg
Original Lost Vape Triade Triple DNA250 Box Mod $139.99 Multi-color, The Triade DNA 250 by Lost Vape is an updated version of the Triade DNA 200. Compared to its predecessor, the Triade DNA 250 features a 50 watt power increase to 250W, faster USB charging at 2 amps, a 55A current output limit, on-board reverse voltage protection, a higher current fuse and an easier stainless steel temperature control system.
http://www.3fvape.com/100750-home_de...-3-x-18650.jpg
Original Fummy FZ RTA $25.99 The original Fummy FZ RTA is constructed from stainless steel and glass tank. The RTA is in popular 24mm diameter and holds 3.5mL juice. The RTA is with Velocity style dual pole build deck and bottom airflow control.
http://www.3fvape.com/100712-home_de...m-diameter.jpg
Taifun GT III RTA Clone - 316 Stainless Steel $18.99 316 stainless steel veison. The Taifun GT III clone RDA is with Top-fill System and 5ml capacity made of high quality 316 stainless steel with glass insert. With the completely new technology, the coil can be easily attached and can be changed or controlled easily even with a full tank.
http://www.3fvape.com/100719-home_de...m-diameter.jpg
Charm RDA Clone $10.99 304 stainless steel, the Charm clone RDA is with top heat sink design and in 21mm diameter. The RDA supports top & bottom adjustable airflow control, 2 air slits on the sleeve. This RDA comes with botton feeder pin.
http://www.3fvape.com/100724-home_de...m-diameter.jpg
Original Praxis Spitfire Replacement Coil Heads $11.99 The 0.3 ohm Spitfire replacement coils is suitable for the Praxis Spitfire tank (Praxis Survival Starter Kit). This coil comes in a pack with 5 PCS.
http://www.3fvape.com/100725-home_de...-ohm-5-pcs.jpg
Original Eleaf Replacement ECL Coil Head for iJust S / Lemo 3 / MELO III $8.99 Eleaf newly added a new member to EC series atomizer heads named ECL 0.18ohm Head. This RCL coil head is compatible with: iJust S Atomizer, Lemo 3, iJust 2/iJust 2 mini atomizer, MELO III, MELO 2, MELO
http://www.3fvape.com/100730-home_de...-ohm-5-pcs.jpg
Original IJOY Combo RDTA Atomizer Replacement IMC-Coil $14.99 The original IJOY Combo RDTA Atomizer Replacement IMC-Coil is in 0.3 ohm and works with 40~80W power output. This coil head is in 5 PCS pack.
http://www.3fvape.com/100734-home_de...080w-5-pcs.jpg
Original IJOY Combo RDTA Atomizer Replacement IMC-2 RBA Deck $7.99
http://www.3fvape.com/100737-home_de...eck-golden.jpg
Original IJOY Combo RDTA Atomizer Replacement IMC-3 RBA Deck $6.99
http://www.3fvape.com/100740-home_de...eck-golden.jpg
Original IJOY Combo RDTA Atomizer Replacement IMC-4 RBA Deck $6.99
http://www.3fvape.com/100743-home_de...eck-golden.jpg
Original IJOY Combo RDTA Atomizer Replacement IMC-6 RBA Deck $6.99
http://www.3fvape.com/100746-home_de...eck-golden.jpg
-
SMOK Alien 220W Silicone Sleeve Case $1.69 Multi-color available, suitable for SmokTech Alien 220W box mod.
http://www.3fvape.com/100853-home_de...-mod-black.jpg
Wide Bore 510 Drip Tip $1.89 Made from Acrylic, multi-color, 13mm in height.
http://www.3fvape.com/100892-home_de...rylic-13mm.jpg
Acrylic Wide Bore Drip Tip for Smok TFV8 / 1/2 Goon RDA / Kennedy 24 / 25 RDA $1.99 This is a wide bore drip tip made from Acrylic. It is suitable for SMOK TFV8 / Wide Bore Goon RDA / Kennedy 24/25 RDA. This wide bore drip tip features 13mm length, 16mm outer diameter and 12.4mm connector diameter. With the hollow center, this drip tip will bring you good vaping experience!
http://www.3fvape.com/100904-home_de...-grey-13mm.jpg
Replacement Honeycomb Drip Tip for Council of Vapor Vengeance Atomizer $1.99 The honeycomb shield is attached to the bottom of the acrylic drip tip to prevent spit back. The acrylic drip tip is suitable for Council of Vapor Vengeance Atomizer.
http://www.3fvape.com/100919-home_de...rylic-16mm.jpg
Aspire Cleito Resin Wide Bore Drip Tip $2.99 This is a wide bore drip tip made from Resin. This wide bore drip tip features 13.5mm length and 15mm outer diameter. The resin drip tip is suitable for Aspire Cleito tank atomizer. Random color will be shipped (only one piece).
http://www.3fvape.com/100922-home_de...olor-135mm.jpg
-
Panzer G3 Mechanical Mod Clone + Fuel V2 RDA Clone Kit $26.99
The Fuel V2 clone RDA is in 24mm diameter and dual-pole design. The RDA is with slanted airflow design. It comes with wide bore drip tip as well as 510 drip tip adapter. The PANZER G3 clone mod features a three piece design, hybrid direct connect top cap, oversized copper hex negative contact, recessed firing pin and is constructed of solid brass.
http://www.3fvape.com/100933-home_de...m-diameter.jpg
MarsTeam Japan Yokozuna Sub-Ohm Tank Clone $17.99
The Yokozuna features a trim and compact form factor coupled with a 2.5ml tank capacity that allows for a well balanced profile. with 0.8 ohm and 0.3 ohm Kanthal coils rated at 15 to 35W and 20 to 50W respectively. Filling the 2.5ml tank is done via a dual bottom fill system.
http://www.3fvape.com/100970-home_de...m-diameter.jpg
Original Sikary Dicey Saint SUB ohm Atomizer $14.99
The original Sikary Dicey Saint Sub Ohm Tank is the patented tank from SKE technology. The small cute size is similar to UD goblin mini. The coil electrode is gold-plated design, which can decline the internal resistance and gives pure taste.
http://www.3fvape.com/100965-home_de...m-diameter.jpg
Original COUNCIL of VAPOR Vengeance Tank Atomizer $23.99
The original COUNCIL OF VAPOR Vengeance Tank Atomizer is with Honeycomb and Heat Sink drip tip and 2ml capacity made of Stainless Steel. The original COUNCIL OF VAPOR Vengeance Tank Atomizer has four adjustable airflow slits with a heat resistant system and it features 22mm diameter.
http://www.3fvape.com/100960-home_de...m-diameter.jpg
Original Efest LUC V4 LCD Universal 4-Slot Digital Battery Charger $36.99
The original Efest LUC V4 is high quality with 4 charging channel and big LCD charger, it has four built-in independent charging channels with reverse polarity protection, short circuit protection, over-current protection and Zero voltage activation function, it can automatically monitor battery power and give an alarming notice. LUC V4 charger is compatible with most 3.7V Li-ion or LiMn batteries like 10440, 14500, 14650, 18500, 17670, 18350, 18650, 18700, 26500, 26650 etc. It can charge 15270 or 14250 batteries with spacers. With one full charged battery in channel 2, LUC V4 charger also can charge those devices, such as mobile phone, iPad, MP3, Mp4, PSP etc.
http://www.3fvape.com/101011-home_de...ac-100240v.jpg
Original SMOKTech SMOK TFV8 Baby-T6 Coil Head $18.99
The V8 Baby-T6 coil head is suitable for SMOK TFV8 Baby tank atomizer. The V8 Baby-T6 core features 0.2 ohm resistance.
http://www.3fvape.com/101007-home_de...-ohm-5-pcs.jpg
Original SMOKTech SMOK TFV8 Baby-Q2 Coil Head $13.99
The V8 Baby-Q2 coil head is suitable for SMOK TFV8 Baby tank atomizer. The V8 Baby-Q2 core features 0.6 ohm resistance.
http://www.3fvape.com/101009-home_de...-ohm-5-pcs.jpg
Replacement Coil Head for MarsTeam Yokozuna V2 Tank $8.99
5 pcs-Pack MarsTeam Yokozuna V2 Tank replacement coil; 0.3ohm, 0.8ohm available.
http://www.3fvape.com/100999-home_de...-ohm-5-pcs.jpg
Original Sikary Dicey Saint Atomizer Coil Head $7.99
4 pcs-Pack Sikary Dicey Saint Tank replacement coil; 100% Organic cotton. 0.3ohm, 1.0ohm, 1.5ohm available.
http://www.3fvape.com/100981-home_de...-ohm-4-pcs.jpg
Original Council of Vapor Vengeance Replacement Coil Heads $24.99
10 pcs pack, 0.8ohm
http://www.3fvape.com/100975-home_de...ohm-10-pcs.jpg
-
The Predator Mechanical Mod Clone $19.99
The Predator clone Mechanical Mod is made from brass and powered by 1 x 18650 battery. The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the Double Cross mod.
http://www.3fvape.com/101175-home_de...-1-x-18650.jpg
Murdered Out Crime Scene II Rogue Mechanical Mod Clone $19.99
The Murdered Out Crime Scene II Rogue Style Mechanical Mod is made from Anodized aluminum and brass bottom button. The mod is powered by 1 x 18650 battery (not included).
http://www.3fvape.com/101231-home_de...-1-x-18650.jpg
Petri V3 RDA Clone $9.99
The Petri V3 clone RDA is constructed from stainless steel and in 22mm diameter. The RDA is with dual-pole design and adjustable airflow control.
http://www.3fvape.com/101182-home_de...m-diameter.jpg
The Houston Mechanical Mod Clone + Battle RDA Clone Kit $25.99
The Houston clone Mechanical Mod is made from brass and powered by 1 x 18650 battery. Fixed 510 hybrid top machined into the mod for enhanced conductivity makes it perfect. There are 4 vent holes on the top of the mod.The Complyfe Battle clone RDA is constructed from stainless steel triple-post deck, brass top cap and stainless steel drip tip.
http://www.3fvape.com/101154-home_de...-1-x-18650.jpg
The Predator Mechanical Mod Clone + Battle RDA Clone Kit $26.59
The Predator clone Mechanical Mod is made from brass and powered by 1 x 18650 battery. Fixed 510 hybrid top machined into the mod for enhanced conductivity makes it perfect. There are 4 vent holes on the top of the mod. The Complyfe Battle clone RDA is constructed from stainless steel triple-post deck, brass top cap and stainless steel drip tip.
http://www.3fvape.com/101166-home_de...-1-x-18650.jpg
Murdered Out Crime Scene II Rogue Mechanical Mod Clone + Battle RDA Clone Kit $24.99
The Murdered Out Crime Scene II Rogue clone Mechanical Mod is made from Anodized aluminum and brass bottom button. The mod is powered by 1 x 18650 battery (not included).
The Complyfe Battle clone RDA is constructed from Stainless Steel. The Complyfe Battle clone RDA comes with triple-post deck design. The RDA features 24mm diameter, large build deck.
http://www.3fvape.com/101222-home_de...-1-x-18650.jpg
The Swiss Mechanical Mod Clone + Battle RDA Clone Kit $25.99
The Swiss clone Mechanical Mod is made from brass and powered by 1 x 18650 battery. The fixed 510 hybrid top is machined into the mod for enhanced conductivity. There are 4 vent holes on the top of the Double Cross mod. The Complyfe Battle clone RDA is constructed from stainless steel triple-post deck, brass top cap and stainless steel drip tip.
http://www.3fvape.com/101239-home_de...-1-x-18650.jpg
Acrylic Drip Tip for SMOK TFV8 Cloud Beast Atomizer / Wide Bore Goon RDA / Kennedy 24 $1.99
This is a Acrylic drip tip suitable for SMOK TFV8 Cloud Beast Atomizer and the Goon RDA with 1/2 inch drip tip connector. This resin drip tip features 16mm length, 16mm outer diameter. With the hollow center, this drip tip will bring you good vaping experience! Suitable for: TFV8/ Kennedy 24 / 1/2 Goon RDA.
http://www.3fvape.com/101207-home_de...white-16mm.jpg
CoilArt MAGE RTA Wide Bore Drip Tip $2.29
The wide bore drip tip is suitable for CoilArt MAGE RTA atomizer. The drip tip is made of Acrylic, with hollow center.
http://www.3fvape.com/101210-home_de...wn-acrylic.jpg
-
STAINLESS STEEL + EPOXY RESIN DRIP TIP FOR SMOK TFV8 CLOUD BEAST / WIDE BORE GOON RDA $3.59
This is a Stainless Steel + Epoxy Resin drip tip suitable for SMOK TFV8 Cloud Beast Atomizer and the Goon RDA with 1/2 inch drip tip connector. This resin drip tip features 16mm length, 10mm inner diameter and 16mm outer diameter. With the hollow center
http://www.3fvape.com/101652-home_de...urple-16mm.jpg
Stainless Steel + Epoxy Resin Drip Tip for SMOK TFV8 Cloud Beast $3.59
This is a Stainless Steel + Epoxy Resin drip tip suitable for SMOK TFV8 Cloud Beast Atomizer and the Goon RDA with 1/2 inch drip tip connector. This resin drip tip features 16mm length, 10mm inner diameter and 16mm outer diameter.
http://www.3fvape.com/101636-home_de...urple-16mm.jpg
Stainless Steel + Acrylic Drip Tip for SMOK TFV8 Cloud Beast Atomizer $2.39
This is a Stainless Steel + Acrylic drip tip suitable for SMOK TFV8 Cloud Beast Atomizer and the Goon RDA with 1/2 inch drip tip connector. This resin drip tip features 16mm length, 10mm inner diameter and 16mm outer diameter. With the hollow center
http://www.3fvape.com/101660-home_de...-grey-16mm.jpg
510 Drip Tip for E-cigarettes Atomizer,Resin, 16mm $2.59
The 510 drip tip is made from Resin with 16mm length and 10mm diameter. This 510 drip tip is suitable for most of e-cig atomizer. With the hollow center
http://www.3fvape.com/101563-home_de...resin-16mm.jpg
510 Drip Tip for E-cigarettes Atomizer,Epoxy Resin, 16mm $3.59
The 510 drip tip is made from Epoxy Resin with 16mm length and 10mm diameter. This 510 drip tip is suitable for most of e-cig atomizer. With the hollow center
http://www.3fvape.com/101551-home_de...resin-16mm.jpg
Epoxy Resin Drip Tip for SMOK TFV8 Cloud Beast Atomizer / Wide Bore Goon RDA $3.59
This is a Epoxy Resin drip tip suitable for SMOK TFV8 Cloud Beast Atomizer and the Goon RDA with 1/2 inch drip tip connector. This resin drip tip features 16mm length, 10mm inner diameter and 16mm outer diameter. With the hollow center
http://www.3fvape.com/101543-home_de...k-red-16mm.jpg
Epoxy Resin Drip Tip for SMOK TFV8 Cloud Beast Atomizer / Wide Bore Goon RDA / Kennedy 24 $3.59
This is a Epoxy Resin drip tip suitable for SMOK TFV8 Cloud Beast Atomizer and the Goon RDA with 1/2 inch drip tip connector. This resin drip tip features 16mm length, 10mm inner diameter and 16mm outer diameter. With the hollow center, this drip tip will bring you good vaping experience! Suitable for: TFV8/ Kennedy 24/ 1/2 Goon RDA.
http://www.3fvape.com/101523-home_de...r-red-16mm.jpg
Stainless Steel + Acrylic Drip Tip for SMOK TFV8 Cloud Beast Atomizer / Wide Bore Goon RDA $2.39
This is a Stainless Steel + Acrylic drip tip suitable for SMOK TFV8 Cloud Beast Atomizer and the Goon RDA with 1/2 inch drip tip connector. This resin drip tip features 16mm length, 10mm inner diameter and 16mm outer diameter. With the hollow center, this drip tip will bring you good vaping experience! Suitable for: TFV8/ Kennedy 24/ 1/2 Goon RDA.
http://www.3fvape.com/101512-home_de...r-red-16mm.jpg
510 Drip Tip for E-cigarettes Atomizer $2.89
The 510 drip tip is made from Resin with 16mm length and 10mm diameter. This 510 drip tip is suitable for most of e-cig atomizer. With the hollow center, this drip tip will bring you good vaping experience!
http://www.3fvape.com/101470-home_de...resin-16mm.jpg
Replacement Drip Tip for 22mm RDA $2.59
The Replacement Drip Tip is suitable for 22mm RDA. This wide bore drip tip will give you a wonderful vaping experience!
http://www.3fvape.com/101453-home_de...resin-15mm.jpg