Multa lähtee vasemman käden hauis. Joku syntymätön vauva saa siitä hyvän niskalihaksen!
Printable View
Unohtu vielä listasta, että jos haluaa käyttää RST tankkia, niin päältäpäin näkee yhdellä vilkaisulla paljonko nestesyöttö on auki, eli täytä, käytä ja unohda teoria toteutuu myös tuolloin. Kirkkaalla tankilla näkee tietysti myös sen nestemääränkin. :)
Toi on kiva optio myös aloittelijoille, eli "3/4 kieppiä 0,20 kanthalilla kannattaa pitää nestesyöttöä auki noin 2,5 yksikköä ja on silloin juuri sopiva." oli sitten kirkas tai RST tankki käytössä.
Nyt oikeesti hiljaa ja anna tilinumero!
No kun en mä oikein ryyppääkään ja tuskin meikäläisen tuotoksista kukaan mitään maksais, toimivista sisuskaluista ehkä jokusen kympin saa. :DGigoloksi voisi ruveta, mutta siitäkään tuskin liksoille pääsis ja epäilen että emäntä ei siihen(kään) myötämielisesti suhtautus. :P
Pysyn kyllä hyvin skeptisenä tuon hinnan suhteen, jos kaikki em. ominaisuudet laitteesta löytyy, kunnes laitteen käteeni siihen hintaan saan. :D
Hankalaksi menöö varmasti tämä nyt, jos tekijä on pystynyt aiemmin hoitamaan työsuhteena kalliiden koneiden käytön, mutta nyt joudutaankin ostamaan valmistus.
Hankalaksi menöö.
Tilaukseen mennee. Tsemppiä Veljonille töiden suhteen..
Veljon nicki muodostuu kahdesta henkilöstä, arvaas onko toinen vielä töissä tuolla alkuperäisessä firmassa kaikkien koneiden äärellä... :D Täysin omaa spekulointia, mutta kai sitä täytyy vielä toivonkipinää elätellä että tuotantolaitteet saataisiin tehtyä tutussa ja turvallisessa ympäristössä. :D
Mieli tekisi ostaa Veljon ex-työpaikka, pistää nykyinen pamppu lakaisemaan lattioita ja hämmentämään emulsiota pojille. :D
Kaikkiko täällä on tällaisia persaukisia? :o
Voisin mäkin lunastaa jonkun osakkuuden siitä firmasta, niin saadaan asiat rullaamaan. :DLainaus:
Alkuperäinen postaaja Sähköpössymies
Saako tuohon muokattua erillisen lisäosan kaifun sticker tyyliin?
Eli putki ja ato tulisi gripperin tapaan rinnakkain.
Jos tämä ja Jalippon listaamat ominaisuudet saa samassa paketissa niin setin hinta saa jo hyvinkin alkaa kakkosella.
No eihän toi pituudella ole muutenkaan pilattu, mutta kierteet löytyy ato-osan pohjasta ja akkuputken yläpäästä, eli sticker pala vaan, jossa kulkee plusjohdin ja maadoituksen hoitaa runko.
En osaa sanoa kuinka paljon tolle on kysyntää, tai kävisikö Svoëmeston sticker suoraan. Silicahybridin kierteet ovat yhteensopivat esim. Caravelan, Papsin ja Gussin kanssa, eli ton ato-osan saa natiiviliitännällä kiinni myös noihin modeihin. ;)
No eiköhän tämä ollut sitten tässä, joko voin kohta tilata?
Mutkan voin koneistaa kyllä itsekin...
Tarkoitat siis g20 kokoa? Ja arvaan kierteeksi M20x1
Kyllä vaan ja taitaa kyseinen GUS kulkea nimellä G22 joka ilmaisee samalla ulkohalkaisijan?Lainaus:
Alkuperäinen postaaja Sähköpössymies
Tämä hanke ei saa rahan puutteeseen kaatua. Veikkaan aika monen olevan valmis maksamaan tuotteesta jo nyt, minä ainakin.
E: Eikä tarvis pankistakaan niin paljoa kallista rahaa lainata
Kyllä tää tavalla tai toisella tulee markkinoille, siitä olen ihan varma.Lainaus:
Alkuperäinen postaaja laonovi
Veikkaan että joku suomikauppakin olis valmis ostamaan piirustukset ja yksinoikeuden tuotteeseen, jos täydellinen umpikuja tulee vastaan.
maksetaanko suomessa spermasta? näin niinkö yleisesti.
E: sori ot pikku känässä liittyen tuohon Jalipon aikasempaan