Atomisaattorin / laitteiden huolto ja puhdistus
Eli kiinnostaisi muiden höyryttelijöiden vinkit atomisoija huoltamiseen. Itselläni ei ole kestänyt atomisoijat kuin n. 2 viikkoa. Netissä aika paljon on ollut juttua, että joillan on kestänyt monta kuukauttakin. Mitkä on parhaat huolto toimenpiteet? kerran päivässä puhaltaa ylimääräiset nesteet pois? antaa kuivua yön yli vai ei päästä ikinä kuivaksi? laskee kuuma vettä läpi?
Vs: Atomisoijan huoltaminen
Ainakin kerran viikossa hanasta kuumaa vettä ja antaa mennä paineella läpi (suosittelen jotain pihtiä, muuten palaa näpit). Toinen toimiva konsti on isopropyylialkoholia ostaa 100ml apteekista. Esimerkiksi 5ml ruiskun sisälle menee tavalliset 510 ja 510-T atomisaattorit. Mäntä irti, atomisaattori sisälle, imaise IPA:a ruiskuun, käännä neula ylös, paina ilma ulos, imaisea lisää IPA:a jne. Sitten kun ruisku on melkein täynnä niin ravistele raivokkaasti 5-10 minuuttia. Lähtee paska irti aika hyvin. Jos ei jaksa apteekista hakea vajaan 10€ pesuainetta niin keitä vettä ja kun kiehuu niin sinne atomisaattorit pomppimaan 10 minuutiksi. Ne kestää oikein hyvin 100C lämmön, onhan vastuskin sisällä 200C kun antaa virtaa. Ja tietysi kallein ja hienoin ratkaisu on ultraäänipesu.
Vs: Atomisoijan huoltaminen
Soveltuuko 60% koskenkorva vodka atomosoijan puhdistukeen?
Vs: Atomisoijan huoltaminen
Vs: Atomisoijan huoltaminen
Tyhmään kysymykseen asiallinen vastaus.
Vs: Atomisoijan huoltaminen
Riippuu atosta. Nää eGo-T atot puran aina puhdistukseen palasiksi. Neulat irti ja ultraäänipesuriin vartiks. Kuivapolton jälkeen ne on kuin uusia (ehkä jopa parempia).
Tarvittavat huollot / pesut.
Haluaisin kuulla miten noita vermeitä kannattaa huoltaa tai pestä. Myös mitä ei kannata tehdä...
Aloittelija kun olen ja vasta eka Ego tulossa niin kiinnostaa. Pitääkö mun heti älytä tehdä niille jotain ja entä jatkossa, kun olen
lukenut että maku esim jää päälle joistain litkuista miten sen voi estää/ voiko...
Sit haluaisin kuulla mitä suosittelette ekaks koti modiksi kai sekin pitää ostaa.
ISO KIITOS jo nyt tästä hienosta paikasta ja vastauksista.
Paljon on täältä selvinnyt ja apua tullut jo nyt.
Vs: Atomisaattorin / laitteiden huolto ja puhdistus
Yhdistin tämän vanhaan ketjuun ja muokkasin otsikkoa. Täällä voi siis tästä eteenpäin keskustella yleisesti huolto- ja putsaustoimenpiteistä. Jos joku viitsii linkitellä foorumilla siellä täällä olevia vinkkejä ja ohjeita niin hyvä.
Vs: Atomisoijan huoltaminen
Lainaus:
Alkuperäinen postaaja
SiB77
Toinen toimiva konsti on isopropyylialkoholia ostaa 100ml apteekista. Esimerkiksi 5ml ruiskun sisälle menee tavalliset 510 ja 510-T atomisaattorit. Mäntä irti, atomisaattori sisälle, imaise IPA:a ruiskuun, käännä neula ylös, paina ilma ulos, imaisea lisää IPA:a jne. Sitten kun ruisku on melkein täynnä niin ravistele raivokkaasti 5-10 minuuttia. Lähtee paska irti aika hyvin. Jos ei jaksa apteekista hakea vajaan 10€ pesuainetta
IPA kannattaa ostaa vaikka huoltoasemalta, nesteen jäänesto ="100"% IPAa hinta n.5e litra!!
- http://www.neste.fi/tp_tiedote.aspx?...lang=&type=ktt
- Sininen etiketti, jossa lukee jäänesto
Vs: Atomisaattorin / laitteiden huolto ja puhdistus
Tuo Nesteen jäänesto ei taida olla enää myynnissä? Ei ainakaan Nesteen sivuilla ole siitä tietoa. No enivei, ostin apteekista isopropyylialkoholia 100ml pullon 5,90 euroa (sievä litrahinta).
eGo-T:n atomisaattori maistui palaneelta ja omat kokemukset purkamisesta eivät ole kannustavia, joten kemiallisesti toimeen. Pieneen muovipurkkiin liraus liuotinta ja atoon kumiletkun pätkä päähän. Letkun pää littanaan sormien välissä ja ato liemeen. Letkua puristelemalla liemi kulki edestakaisin atossa sitä huuhdellen. Parin minuutin lutkutuksen jälkeen atoon puhaltelua ja hetkeksi kuivumaan lämpimään. Isopropanoli haihtuu nopeasti.
Palaneen maku oli poistunut ja banaani maistui taas itseltään. Kuivapolttoa en siis tehnyt välttääkseni palanutta imulankaa. Ainakin pikaisesti koe täytti odotuksia.
Vs: Atomisaattorin / laitteiden huolto ja puhdistus
Jarrujen putsaus spray helpoin tapa.Sillä kun putsaa ja keittää tai niin taas pelaa.Megatkin putsasin noin ja toimii.
Vs: Atomisaattorin / laitteiden huolto ja puhdistus
Lainaus:
Alkuperäinen postaaja
Ketjupolttaja
Jarrujen putsaus spray helpoin tapa.Sillä kun putsaa ja keittää tai niin taas pelaa.Megatkin putsasin noin ja toimii.
Tuo on kaikista helpoin tapa ja ei jää makuja. Vielä jos löytyy paineilmaa joko pullossa tai kompurasta niin aina vaan paranee :D
Vs: Atomisaattorin / laitteiden huolto ja puhdistus
Hmm, autotallista löytyy trikloorietyleeniä. Kokemukseni mukaan sillä irtoaa ihan kaikki, tarvittaessa vaikka sielu lihoista. Tai no, siitä ei ole kokemusta. Se on nopeasti haihtuvaa eikäpä mitään jäämiä pitäisi jäädä henkeä vaarantamaan.
Vs: Atomisaattorin / laitteiden huolto ja puhdistus
Lainaus:
Alkuperäinen postaaja
korsu
Hmm, autotallista löytyy trikloorietyleeniä. Kokemukseni mukaan sillä irtoaa ihan kaikki, tarvittaessa vaikka sielu lihoista. Tai no, siitä ei ole kokemusta. Se on nopeasti haihtuvaa eikäpä mitään jäämiä pitäisi jäädä henkeä vaarantamaan.
Kyllä siitä kokemusta on, ei ehkä ihan heti, mutta muutamien vuosien altistus ainakin merkittävästi nopeuttaa sielun irtoamista. Jäämiä ei saakaan jäädä. Ja on kyllä tosi tehokasta.
Vs: Atomisaattorin / laitteiden huolto ja puhdistus
Aattelin nyt laittaa tänne kun tuossa lukee huolto/puhdistus.
Eli sain juuri tilauksen Wlholta jossa tilasin monia perus drip tippejä.
Pesin en normaalisti lämpimällä vedellä ja fairyllä ennen käyttöä niinkuin olen aina kaikille tipeille tehnyt.
Nyt sitten kun olen töissä yön eikä ole muita kuin nuo kaksi uutta tippiä mukana niin huomasin kun maistuu oudolle.
Totesin että tipit haisee pahalle (jollekkin kemikaalille) ja maistuu myös pahalle. Eli miten pesette omat tippinne.
En ole kyllä ennen humannut muissa tällaista hajua/makua.
Nyt pitää DCT tankkia imeä ilman tippiä PRKL! Onneksi on tuo 3ml malli eikä se suurempi. ;)
Vs: Atomisaattorin / laitteiden huolto ja puhdistus
Vanupuikosta olen nyppinyt hieman vanua pois että mahtuu "rassaamaan" tipin läpi. Lopuksi huuhtelu hanasta kuumalla vedellä. Voisikin pitää taas pitkästä aikaa tippipyykit :laugh:
Vs: Atomisaattorin / laitteiden huolto ja puhdistus
Näin yritin tehdä mutta ei auta.
Tämä tippi siis kyseessä.
http://www.ecigwizard.com/shop/fi/dr...drip-tips.html nuisto tuo Dragon Red.
Tipin sisällä on jotai karkeaa valkoist "töhnää" joka ei lähde pois vanupuikolla, on kuin hiekkapaperia.
Ehkä nämä kuvat auttavat.
http://imageshack.us/photo/my-images...mag0059ow.jpg/
http://imageshack.us/photo/my-images/545/imag0058x.jpg/
Haju ja maku on kenties verrattavissa vaikka uusiin kumisiin johonkin jotka haisee ja maistuu pitkäänkin.
Vs: Atomisaattorin / laitteiden huolto ja puhdistus
Lainaus:
Alkuperäinen postaaja
Tontza
Pitäiskö mun nyt karskisti vaan reklamoida. Koska tota ei voi käyttää...
Voiskos joku heittää oman "5 senttisen" rohkasuks?!
Vs: Atomisaattorin / laitteiden huolto ja puhdistus
Kokeile niiden tippien kanssa vielä sellaista, että otat lämmintä vettä n. 60-70 asteista /EI KIEHUVAA). Kaadat kuuman nesteen esim. kahvikuppiin...heität vähän ruokasoodaa mukaan ja tipit sinne sekaan. Annat niiden muhia siellä pari tuntia ja sen jälkeen kokeilet uudestaan SiB77:n vinkkiä.
Vs: Atomisaattorin / laitteiden huolto ja puhdistus
Lainaus:
Alkuperäinen postaaja
True Puffin
Kokeile niiden tippien kanssa vielä sellaista, että otat lämmintä vettä n. 60-70 asteista /EI KIEHUVAA). Kaadat kuuman nesteen esim. kahvikuppiin...heität vähän ruokasoodaa mukaan ja tipit sinne sekaan. Annat niiden muhia siellä pari tuntia ja sen jälkeen kokeilet uudestaan SiB77:n vinkkiä.
Täytyy tuota vielä kokeilla. Keittelin niitä tuossa noin 30min välillä vaihtaen veden. Voi olla että auttoi en vielä ole kokeillu mutta väri ainakin haalistui :D. Noh, reklamoin tipistä ja lähettävät uuden Welholta. Sanoivat että ei ole koskaan ennen mitään vastaavaa tapahtunut. Mutta katsotaan.
Kiitos vastauksesta!