Vs: Rikkoontuineita eGoja
Hyvän laadun myyjä kannattaa myös mainita jos piraatti :)
Paljonko muuten verkkolaite antoi jännitettä tuolle laturille? Sen ei speksien mukaan pitäisi antaa kuin 5 V, mutta eipä ole tullut mitattua todellista jännitettä.
Vs: Rikkoontuineita eGoja
Jos se noin pahasti on sulanut, niin en ehkä vetäisi mitään johtopäätöksiä ulostulojännitteestä. :)
Ennen sulamista on voinut ollakin oikea jännite, missä tämä oli kiinni? Tietokoneessa vai muuntajassa?
Vs: Rikkoontuineita eGoja
Lainaus:
Alkuperäinen postaaja
L18
Jos se noin pahasti on sulanut, niin en ehkä vetäisi mitään johtopäätöksiä ulostulojännitteestä. :)
Ennen sulamista on voinut ollakin oikea jännite, missä tämä oli kiinni? Tietokoneessa vai muuntajassa?
Onnettomuushetkellä vehje oli yön yli kiinni tietokoneessa, mutta aiemmin olen ladannut myös applen verkkovirta--usb muuntajassa. Nähtävästi olen hukannut sen johonkin mutta tarkistan sen ulostulon myöhemmin.
Lainaus:
Alkuperäinen postaaja
Vapoman
Hyvän laadun myyjä kannattaa myös mainita jos piraatti :)
Paljonko muuten verkkolaite antoi jännitettä tuolle laturille? Sen ei speksien mukaan pitäisi antaa kuin 5 V, mutta eipä ole tullut mitattua todellista jännitettä.
Laturi oli Ecigwizardilta sen 5,96eur.
Kuten sanottua tarkistan sen applen ulostulon kun jostain löytäisin :)
Laturin selkäpuolella kuitenkin seisoo:
Input: DC5V 500mA
Output: DC4.2V 420mA
Vs: Rikkoontuineita eGoja
Laitetaas vanhaan ketjuun, otsikko natsaa
On kaksi eGo-C Upgrade akkua kummankin valot pelaa ja modin vaihtokin onnistuu mutta toinen ai anna (kai) virtaa tankille, lataukseen laitettaessa vilkahtaa valot ja näyttää vihreää (täysi) vaan edelleenlään ei anna tankille virtaa :(
Tänään sain yleismittarin, jokin 91010 mali (oikealla) olen yrittänyt etsiä käyttöohjeita etten käräytä mitään.
Toinen akku näyttää mittarin yhdellä valinnalla 8.2 siis se toimiva ja toimimaton 7.0
pärkele ota tästä mittarista selvää, liikaa valintoja, ohjeetkin on hiukan erinäköiselle
http://www.spelektroniikka.fi/images...p_1004_dfa.jpg http://lehis.kuvat.fi/kuvat/Link-it/...G/_img1280.jpg
mittarille, tässä mittarissa V- (ja 3 pistettä viivan alla) on toisen kuvan DCV ja V~ on toisen kuvan ACV kummalla tuo pitäisi mitata, kokeilin tuolla DCV joka siis näytti nuo yllä olevat arvot, oikealla oma mittari.
Miten paljon sitä liitintä uskaltaa räplätä, jokin verran räpläsin muttei auttanut :(
Vs: Rikkoontuineita eGoja
Väännä vasemmalle kohtaan v 20, törkkää punanen keskinapaan ja musta laitaan ja paina nappulaa... Näät paljon antaa voltteja.
Samoissa paikoissa nuo arvot, eli vastaavalla kuin toisen dcv 20 mittaat ulosannin.
Vs: Rikkoontuineita eGoja
Lainaus:
Alkuperäinen postaaja
ds3finland
Väännä vasemmalle kohtaan v 20, törkkää punanen keskinapaan ja musta laitaan ja paina nappulaa... Näät paljon antaa voltteja.
Samoissa paikoissa nuo arvot, eli vastaavalla kuin toisen dcv 20 mittaat ulosannin.
Kiitos, löytyihän se oikea kohta kun avustettiin :)
Siis eGo-C jolla ei saa höyryjä 3.47, toimiva näyttää 4.00 ja Twist sen minkä vääntää nupista +.1 (siis 3.2 asetuksella 3.38!) miten paljon tuota keskinapaa pitää siirrellä? josko sillä olis vaan kosketushäiriö?
tuota eroa ihmettelen sama merkki ja molemmat melkein uusia 3.47 vs 4.00
Kun asettaa "reguloinnin" pois (?) toimimattomassa ei luku muutu, toimivassa vähän :/ 4.00 = 4.06 mitä virkaa tuolla on?
Vs: Rikkoontuineita eGoja
Lainaus:
Alkuperäinen postaaja
eLehis
Kiitos, löytyihän se oikea kohta kun avustettiin :)
Siis eGo-C jolla ei saa höyryjä 3.47, toimiva näyttää 4.00 ja Twist sen minkä vääntää nupista +.1 (siis 3.2 asetuksella 3.38!) miten paljon tuota keskinapaa pitää siirrellä? josko sillä olis vaan kosketushäiriö?
tuota eroa ihmettelen sama merkki ja molemmat melkein uusia 3.47 vs 4.00
Kun asettaa "reguloinnin" pois (?) toimimattomassa ei luku muutu, toimivassa vähän :/ 4.00 = 4.06 mitä virkaa tuolla on?
joo kannattaa mini ruuvvaril tai vaik saksien kärjellä vähän nostaa sieltä, ei liikaa ettei tuu ulos. mutta pikkusen, silleen ku jonkun ruuvaat siihen päähän et antaa hiukka vastusta enen ku carto on pohjassa, aika pakko olla napa liian alhaalla, jos antaa kerran mittarillekkin virtaa :D
Vs: Rikkoontuineita eGoja
Lainaus:
Alkuperäinen postaaja
Jani86
joo kannattaa mini ruuvvaril tai vaik saksien kärjellä vähän nostaa sieltä, ei liikaa ettei tuu ulos. mutta pikkusen, silleen ku jonkun ruuvaat siihen päähän et antaa hiukka vastusta enen ku carto on pohjassa, aika pakko olla napa liian alhaalla, jos antaa kerran mittarillekkin virtaa :D
Jokin tässä nyt mättää :( nostin keskinapaa jopa millin ylemmäksi kuin nuo toimivat vaan ei puhahdustakaan vaikka virtaa saakin, tosin vähemmän kuin toiset mutta eGon rajoihin varmaan asettuu 3.47 vs 4.00
Mitään muuta en tehnyt kuin vaihdoin tankkia kun tuo ryhtyi reistaamaan :( mietin jo josko olis ollu pikkupikku naulaa karton keskelle kokeiluun vaan en löutänyt tarpeeksi pientä.
Edellinen akku ei reakoinut napin painalluksiin mitenkään ja tämän piti korvata se vaan kuinkas kävikään :(
Vs: Rikkoontuineita eGoja
Eikös olisi kannattanut laittaa laite takuuvaihtoon ennen kuin menit sitä sörkkimään - takuu raukesi ???
Vs: Rikkoontuineita eGoja
Ei kai se takuu raukea jos ei sitä itte laitetta lähe avaamaan?
Vs: Rikkoontuineita eGoja
Monet firmat neuvoo nimenomaan nostamaan tuota keskinapaa ennen kuin lähettää takuupalautukseen. Ei siis luulisi siitä takuun raukeavan.
Itse olen ajatellut säästää nuo rikkoontuneet eGo-akut modien väsäämiseen. Ne josta itse akku on pimeänä saa elektroniikan ja liittimen valmiiksi modille, vaihtaa vaan isomman akun esimerkiksi tilalle ja koteloi uudestaan.
Vs: Rikkoontuineita eGoja
Lainaus:
Alkuperäinen postaaja
Vapoman
Eikös olisi kannattanut laittaa laite takuuvaihtoon ennen kuin menit sitä sörkkimään - takuu raukesi ???
Kävipä mielessä mutta ei rauennut, toivottavasti uusi ehtii ennen juhannusta, kuten jo mainitsin... taisi olla spostilla kauppiaalle että LavaTube saattaa pullottaa aika rivosti shortseissa XD loman aikana eli eGo tai kaksi on suositeltava lomavarustus, twist kaipailee kaveria :)
Vs: Rikkoontuineita eGoja
Lainaus:
Alkuperäinen postaaja
tonikki
Monet firmat neuvoo nimenomaan nostamaan tuota keskinapaa ennen kuin lähettää takuupalautukseen. Ei siis luulisi siitä takuun raukeavan.
Jup, tuo oli mielessäni kun sitä napaa kaivelin :)
Lainaus:
Alkuperäinen postaaja
tonikki
Itse olen ajatellut säästää nuo rikkoontuneet eGo-akut modien väsäämiseen. Ne josta itse akku on pimeänä saa elektroniikan ja liittimen valmiiksi modille, vaihtaa vaan isomman akun esimerkiksi tilalle ja koteloi uudestaan.
Olis tuossa 1/2 vuotta vanha eGo jolla on niskat poikki ja ihan uusi kolvisetti, kunhan olis aikaa niin sillä voisi harjoitella, uudemmasta eGosta en vielä tiedä mitä sille tekis.
Vs: Rikkoontuineita eGoja
Kävi tuossa muutama ilta sitten niin ikävästi, että biljardipöydän yli kumartuessa housun taskussa ollut 1000mAh joyetechi räpsähti rikki. Eli tuo "nappi" irtosi tuubista, paljastaen akun liitännät.
Toisaalta ihan mielenkiintoista nähdä nekin, mutta kun samalla 0-piuha irtosi, eikä taloudesta löydy kolvia, vaikka taito sen käyttöön löytyykin.
Ilmeisesti (eikä edes ilmeisesti vaan tietenkin ja tottakai) kyseinen pakaroiden välistä mini-USB:llä ladattava versio ei varsinaista akkuviritystä sylje ulos tuolta tuubista vaikka kuinka helistäisi. Olisi ollut kiva nähdä, minkä näköiset liitännät siellä oikeasti on. Tyyliin, että mennäänkö akun kautta kun ladataan ja pössäytellään samanaikaisesti, vai onko välissä "venttiili". No, ehkä yritän metsästää kolvin jostain sen sijaan että rikon tuon tahallani lopullisesti.
Vs: Rikkoontuineita eGoja
Eilen olin mittaamassa ego-t (luultavammin piraatti) akun jännitettä, kun napsahti ja huomasin että oli mittarin piuha väärässä reiässä ampeerien mittauksien jäljiltä. Näppäinlukko ei mene päälle ja syöttää koko ajan virtaa. Nappi palaa sinisenä ja haisee hassulta (ei haju ole pahentunut).
Miten tuon saisi purettua. Youtubesta katoin yhdestä pätkästä että pihdeillä vääntämmällä auki, muttei se itellä ihan noin vaan onnistunut. Jotain poppakonsteja?
Vs: Rikkoontuineita eGoja
Lainaus:
Alkuperäinen postaaja
Marjanpoimija
Eilen olin mittaamassa ego-t (luultavammin piraatti) akun jännitettä, kun napsahti ja huomasin että oli mittarin piuha väärässä reiässä ampeerien mittauksien jäljiltä. Näppäinlukko ei mene päälle ja syöttää koko ajan virtaa. Nappi palaa sinisenä ja haisee hassulta (ei haju ole pahentunut).
Miten tuon saisi purettua. Youtubesta katoin yhdestä pätkästä että pihdeillä vääntämmällä auki, muttei se itellä ihan noin vaan onnistunut. Jotain poppakonsteja?
Chromisesta kierreosasta pihdeillä kiinni ja varovaista nytkytystä edestakaisin. Sillain se irtoaa, ei ole liimatuu tai mitään. Varovainen kannattaa olla ettei nykäse niin voimalla että lähtee juotokset irti, johdoissa ei ole kauheasti pelivaraa. Luultavasti siellä on mennyt se piirively rikki, eli uuttaa elektroniikkaa hankkimaan vaikkapa Peleonilta. Kolvi ja tinaa jos löytyy niin homma toimii.