-
I-Chybrid V3
Hei, olen tilaamassa I-Chybrid V3 Hybrid -mod i-Atty atomisaattorilla 18350 kyseistä laitetta. Tässä vain mietityttää se, että kuinkas kauan tuossa kestää mesh-putki ja kanthal vastuslangat? (en ole koskaan omistanut laitetta jossa olisi kys. jutut:whistle:) Jos tilaa puffilta noita vastuslankoja, niin pitääkö sen olla tietyn paksuista / ohmista, meshissä sama ?
Niitten vaihtaminen tulee oleemaan varmaa sitten aika mukavaa aikanaan, onneksi on youtube ja google lähellä. Luin tuossa jotain threadia niin mainittiin vastuslangan tohottamisesta? Tohoja varmaan saapi (jos on pakko hommata) niin biltemasta tai vastaavasta kaupasta? Onko minkä hintaisia yleensä?
-
http://www.e-savuke.com/vb/hybridit/6506-i-chybrid.html
1.5mm vaijeria + suikku meshiä päälle, 3 kiekkaa 0.32sta kanthalia ja se on siinä.
-
Hmm :thinking:Ei kyllä ole mitään käryä, eiköhä se ole aika alkaa opettelemaan nuo asiat pikkuhiljaa..
Vielä tähän, että Puffi varmaapi tarjoaa nuo ? vai pitääkö katella muualta ?
Vastuslankoja on niin paljon enhä mä nyt löydä sitä oikeaa. Ehkä tuo laite ei ole vielä mulle niin hyvä kun en edes osaa osia siihen katsoa.. :facepalm:
-
Osta 0.32 kanthalia, sit 200/300/400 meshiä, niillä pääsee alkuun.
-
Tilaus tehtynä. Kiitän ja kumarran :thumbsup:
-
onko muuten tuon meshin ja langan tohottaminen pakollista, mitä se hyödyttää jos sitä tohoilee ?
-
Ei oo pakollista, mutta kannattavaa.
Siihen meshipötköön pitää saada hapetus ettei kanthali ota maihin siitä, tohotus tekee sen osaksi.
Jos sulla ei ole tohoa niin pulssittamalla saat setupin kuntoon.
-
Juu, kiitän. Oli kyllä pakko heti kokeilla tuota vehjettä sillä setupilla mikä nyt oli kiinni siinä. Täytin laitteen täyttöreijästä, mutta sitten ku koittaapi ottaa höyryjä siitä ni ei tahdo oikeen tulla mitään ? Tulee semmoinen kitkerähkö savu vain (?) Joku tuossa varmaan kyllä mättää tulee semmoset sauhut jotka on niin tunkkasen makusta, mistä tämä johtuupi ? onnistuinko jo hajottamaan laitteen ?
-
Ne "valmiit" setupit kannattaa heittää lähimpään roskikseen, ne on tehty päin persettä.
-
Aijjaahas, noh ei voi mitään roskiin ne ja nesteet takaisin ;). "Muita tapoja on kynttilä poltto eli mesh rulla kastellaan e-nesteellä, sytytetään ja annetaan palaa loppuun esim. nastan päällä ( tästä nimitys kynttilä poltto) tämä toistetaan 3-5 kertaa." Tommosen lukasin tuolta toiselta palsalta onko samakuin tohottaminen mutta eri muodossa vain? :)
-
Se kynttiläpoltto ei hapeta meshiä tarpeeksi kun lämpöä ei tule riittävästi. Ei siis korvaa tohotusta mutta auttanee jonkin verran jos ei tohoa ole.
-
harmi.. kait pitääpi sitten kokeilla tuota pulsittamista. täytyneen kyllä käydä ostaa jostain tuo tohotin
-
-Ja vaikka sen tohottaa ja polttaa ja hakkaa noitarumpua vieressä niin pitää se loppusilaus siltikin tehdä pulssittamalla :)
Mutta tähän meshin käärintään ja vastuslangan virittelyyn taitaisi löytyä ihan omakin aihe.
-
Juu lueskelen sitä tässä juuri :) Pitäneen siis jättää laite syrjäselle ja väänellä jonkunlaista setuppia. käypi sitten jossai välissä metsästää tuota tohotinta.
Johan tärppäsi clash ohlsonista http://www.clasohlson.com/fi/Kaasupoltin-Coline/30-8274 tuollainen kait riittääpi
-
Tuli tehtyä jonnin sortin säätö saa nähä miten toimiipi ikinää tehny tommosia :D Kyllähä se höyryääpi tiiä sit tuliko oikein tehtyä. Ainaki kurkku tuntumaa saapi vähän liikaakin ehkäpä :) Kiitän ja kumarran neuvoistanne !
Tein sitten uuden säädön, koska en ollu tyytyväinen siihen ekaan. tokasta taisi tulla hieman parempi (?), mutta molemmissa oli niitä "hotspot". Kun kokeilin niin paloi vain sieltä yläpuolelta lankaa, koitin vähän siirellä niitä lankoja mutta ei tapahtunu mitään..
Eiköhä se siitä sitten jossai vaiheessa onnistu paremmi. :P
Pienten testien jälkeen se hieno kurkkutuntuma katosi kokonaan.. hmm mitähän tein väärin
-
Minä mistään mitään tiedä mutta omissa kokeiluissa tuo polttosysteemi auttoi wickaamiseen.(?) Tiedä sitten auttoko yhtään vai kuvittelinko vaan. :D
-
Kyllä siitä sain tulemaan sitä savua nyt jonkun verran. Ongelmana on vain se, että hotspotteja tuli, paloi vain ylhäältä. kattelin sitten videoita niissä sanottiin jos ilmenee ruuvvarilla koittaapi laskea(?) niitä silmukoita, siinä sitten kokeilin ni kyllä niitä silti vielä tuli. Noh harjottelu tekee mestarin ;) Nyt pitäisi vain pähkäillä miten saisin ne silmukat kireälle ja siististi siihen meshin ympärille oli aika karun näköinen lopputulos... :(
-
Kilometri kanthalia ja hyvät hermot niin rupeaa toimimaan. :rolleyes:
-
Totta. Hyvin alkoi kämppä haisemaan kun siinä vähän kokeili että miten palaapi. :) Hermoja hermoja vain.
-
Mites muuten kun tilasin tuon laitteen, ni puffi kehotti ottamaan mukaan tommosen suojapiirin. Noh nappasin sen nyt varmuudeksi, eihän se mahdu sinne akun ja tuon pohjakorkin kanssa sinne. Onko se niin vakavaa jos ei sitä suojapiiriä käytä ?