Printable View
not sure how anyone would order from you,unless you offer free shipping...
Did you know it is illegal in Finland, to order any e-cigarette stuff, from Internet?
even if you do, fast tech is anyways more reliable.
(and you get better deals from aliexpress with FREE shipping,directly from the manufacturers...)
...lukekaa lapsukaiset blogiani niin ette joudu qusetetuksi. :P
Original Uwell Crown 5 single Mesh Coil 0.23ohm (4 PCS) $14.99
Uwell Crown 5 FeCrAl UN2 Single Mesh Coil is applicable to Crown 5 Tank. The 0.23ohm single mesh coil is best for 65~70W
http://www.3fvape.com/img/p/3/9/1/5/...me_default.jpg
Original Uwell Crown 5 dual Mesh Coil 0.3ohm (4 PCS) $14.99
Uwell Crown 5 FeCrAl UN2-2 Dual Mesh Coil is applicable to Crown 5 Tank. The 0. 3ohm dual mesh coil is best for 50~55W, suitable for a restricted direct-to-lung vape, providing warmer vapor and saturated flavor. With Uwell exclusive Pro-FOCS Flavor Testing Technology, it provides you with the ultimate vaping experience.
http://www.3fvape.com/img/p/3/9/1/5/...me_default.jpg
Original Uwell Crown 5 triple Mesh Coil 0.2ohm (4 PCS) $14.99
Uwell Crown 5 FeCrAl UN2-3 Triple Mesh Coil is applicable to Crown 5 Tank. The 0. 2ohm triple mesh coil is best for 65~70W, bringing you slightly tight direct-to-lung vape, huge vapor and decent flavor. With Uwell exclusive Pro-FOCS Flavor Testing Technology, it provides you with the ultimate vaping experience.
http://www.3fvape.com/img/p/3/9/1/5/...me_default.jpg
Original Uwell Crown 5 Tank Atomizer 5ml Standard Edition $29.99
Uwell Crown 5 Sub ohm Tank Vape Atomizer is 29mm in diameter, made of stainless steel and Pyrex Glass Tank with a 5.0ml e-liquid capacity. The Crown 5 Tank hosts a simplified quarter-turn threaded top fill system for faster refills. With the additional silicone seal, the e-liquid can stay in the tank and will not be lost during the filling process. Inside the Crown 5 Sub Ohm Tank is Uwell's patented self-cleaning technology that turns condensation into vapor before it can even build up within your atomizer, thus further protecting you from leaking problems. In addition, within the atomizers is the patented Pro Flavor Core Optimization System or Pro-FOCS for short. Pro-FOCS Flavor Testing Technology provides vapers with the ultimate vaping experience by properly controlling the heating temperature, strictly managing the material quality, and completely restoring the e-juice flavor.
http://www.3fvape.com/img/p/3/9/1/4/...me_default.jpg
Original Uwell Crown 5 Tank Atomizer 5ml CRC Edition $29.99
Uwell Crown 5 sub ohm tank is used together with UN2 mesh coils. There are three types: UN2 0.23ohm Single Meshed Coil; UN2-2 0.3ohm Dual Meshed Coil; UN2-3 0.2ohm Triple Meshed Coil (not included). All versions use mesh instead of a regular coil. The package includes the UN2 0.23ohm Coil and UN2-2 0.3ohm Coil. With quick plug-in system, the installation of the coil can be completed immediately. Along the base of the Crown 5 Sub Ohm Tank is an adjustable airflow ring that can be fully closed for a more restricted vape.
http://www.3fvape.com/img/p/3/9/1/5/...me_default.jpg
Original Uwell Aeglos Pod System Kit 1500mAh 3.5ml $39.99
The Uwell Aeglos Pod Cartridge is made of PCTG and holds 3.5ml capacity. To fill the e-liquid, simply remove the mouthpiece on the top of the pod cartridge, and then conveniently fill the pod with liquid from above without removing the pod from the Aeglos Mod. The battery and the pod are magnetically connected to each other.
http://www.3fvape.com/img/p/3/9/1/5/...me_default.jpg
Original Auguse Draw RTA Pod Cartridge Replacement Tank Tube for Voopoo Drag S / X $4.99
The original Auguse Draw RTA Pod Cartridge Replacement Tank Tube is made from PC + Stainless steel and holds 4.0ml. It is compatible with Auguse Draw RTA Pod Cartridge for Voopoo Drag S / X Pod System.
http://www.3fvape.com/img/p/3/9/1/6/...me_default.jpg
Bobina de malla única Uwell Crown 5 original 0.23ohm (4 PCS) $14.99
Uwell Crown 5 FeCrAl UN2 Single Mesh Coil is applicable to Crown 5 Tank. The 0.23ohm single mesh coil is best for 65~70W
http://www.3fvape.com/img/p/3/9/1/5/...me_default.jpg
Bobina de malla dual Uwell Crown 5 original 0.3ohm (4 PCS) $14.99
Uwell Crown 5 FeCrAl UN2-2 Dual Mesh Coil is applicable to Crown 5 Tank. The 0. 3ohm dual mesh coil is best for 50~55W, suitable for a restricted direct-to-lung vape, providing warmer vapor and saturated flavor. With Uwell exclusive Pro-FOCS Flavor Testing Technology, it provides you with the ultimate vaping experience.
http://www.3fvape.com/img/p/3/9/1/5/...me_default.jpg
Bobina de malla triple Uwell Crown 5 original 0.2ohm (4 PCS) $14.99
Uwell Crown 5 FeCrAl UN2-3 Triple Mesh Coil is applicable to Crown 5 Tank. The 0. 2ohm triple mesh coil is best for 65~70W, bringing you slightly tight direct-to-lung vape, huge vapor and decent flavor. With Uwell exclusive Pro-FOCS Flavor Testing Technology, it provides you with the ultimate vaping experience.
http://www.3fvape.com/img/p/3/9/1/5/...me_default.jpg
Original Uwell Crown 5 Tank Atomizer 5ml Edición estándar $29.99
Uwell Crown 5 Sub ohm Tank Vape Atomizer is 29mm in diameter, made of stainless steel and Pyrex Glass Tank with a 5.0ml e-liquid capacity. The Crown 5 Tank hosts a simplified quarter-turn threaded top fill system for faster refills. With the additional silicone seal, the e-liquid can stay in the tank and will not be lost during the filling process. Inside the Crown 5 Sub Ohm Tank is Uwell's patented self-cleaning technology that turns condensation into vapor before it can even build up within your atomizer, thus further protecting you from leaking problems. In addition, within the atomizers is the patented Pro Flavor Core Optimization System or Pro-FOCS for short. Pro-FOCS Flavor Testing Technology provides vapers with the ultimate vaping experience by properly controlling the heating temperature, strictly managing the material quality, and completely restoring the e-juice flavor.
http://www.3fvape.com/img/p/3/9/1/4/...me_default.jpg
Atomizador de tanque original Uwell Crown 5 edición CRC de 5 ml $29.99
Uwell Crown 5 sub ohm tank is used together with UN2 mesh coils. There are three types: UN2 0.23ohm Single Meshed Coil; UN2-2 0.3ohm Dual Meshed Coil; UN2-3 0.2ohm Triple Meshed Coil (not included). All versions use mesh instead of a regular coil. The package includes the UN2 0.23ohm Coil and UN2-2 0.3ohm Coil. With quick plug-in system, the installation of the coil can be completed immediately. Along the base of the Crown 5 Sub Ohm Tank is an adjustable airflow ring that can be fully closed for a more restricted vape.
http://www.3fvape.com/img/p/3/9/1/5/...me_default.jpg
Kit de sistema de vaina Uwell Aeglos original 1500mAh 3.5ml $39.99
The Uwell Aeglos Pod Cartridge is made of PCTG and holds 3.5ml capacity. To fill the e-liquid, simply remove the mouthpiece on the top of the pod cartridge, and then conveniently fill the pod with liquid from above without removing the pod from the Aeglos Mod. The battery and the pod are magnetically connected to each other.
http://www.3fvape.com/img/p/3/9/1/5/...me_default.jpg
Tubo de tanque de repuesto de cartucho de cápsula RTA original de Auguse Draw para Voopoo Drag S / X $4.99
The original Auguse Draw RTA Pod Cartridge Replacement Tank Tube is made from PC + Stainless steel and holds 4.0ml. It is compatible with Auguse Draw RTA Pod Cartridge for Voopoo Drag S / X Pod System.
http://www.3fvape.com/img/p/3/9/1/6/...me_default.jpg
Original BP Mods Hilt Mosfet Mod Replacement 18350 Battery Shell $19.99
The Original BP Mods Hilt Mosfet Mod Replacement 18350 Battery Shell is made from aluminum alloy. It will change your BP Mods Hilt Mosfet Mod into 18350 mod. (battery not included)
http://www.3fvape.com/img/p/3/9/1/7/...me_default.jpg
Original BP Mods Hilt Mosfet Mod $59.99
Original BP Mods Hilt Mosfet Mod is a specialized portable mod for MTL / RDL vapors. It supports 3 output levels: 3.5V, 3.8V and 4.2V max power.Semi-Mechanical, 1 x 18650
http://www.3fvape.com/img/p/3/9/1/7/...me_default.jpg
ShenRay Squape Arise RTA Clone $25.99
Silver, 316SS + PSU, 4.0ml, DL / MTL, 24mm Diameter. The Air Discs diameter: 1 x 1mm / 2 x 0.8mm / 3 x 0.8mm / 4 x 0.8mm.
http://www.3fvape.com/img/p/3/9/1/7/...me_default.jpg
Original Damn Vape Mongrel RDA Original Price $29.99, Now Only $21.99.
25.4mm / 26mm, with BF Pin + Spare Top Cap
http://www.3fvape.com/img/p/3/9/2/4/...me_default.jpg
Original UPENDS Uppen Vape Pen Pod System Vape Starter Kit Original Price $29.99, Now Only $27.99.
600mAh, 2.0ml, 1.2ohm, MTL, Antibacterial
http://www.3fvape.com/img/p/3/9/2/4/...me_default.jpg
Original SMOKTech Nord 4 80W Pod System Vape Kit $31.99
2000mAh, VW 5~80W, 4.5ml, RPM 2 0.16ohm / RPM 0.4ohm
http://www.3fvape.com/img/p/3/9/2/5/...me_default.jpg
Original SMOKTech Nord 4 80W Pod System Vape Kit Leather Series $31.99
Leather, 2000mAh, VW 5~80W, 4.5ml, RPM 2 0.16ohm / RPM 0.4ohm
http://www.3fvape.com/img/p/3/9/2/5/...me_default.jpg
Original UPENDS Uppen Vape Pen Pod Cartridge Original Price $9.99, Now Only $6.99.
2.0ml, 1.2ohm, PCTG, (2 PCS)
http://www.3fvape.com/img/p/3/9/2/2/...me_default.jpg
Original Uwell Aeglos Replacement Empty Pod Cartridge $3.99
3.5ml, PCTG (1 PC)
http://www.3fvape.com/img/p/3/9/2/2/...me_default.jpg
Original Uwell Aeglos Replacement UN2 Meshed-H Coil Head $8.93
0.23ohm (40~45W), DL, (4 PCS)
http://www.3fvape.com/img/p/3/9/2/2/...me_default.jpg
Original Uwell Aeglos Replacement Coil Head $7.88
0.8ohm (20~23W), MTL, (4 PCS)
http://www.3fvape.com/img/p/3/9/2/2/...me_default.jpg
Original Eleaf iStick P100 100W Pod System Vape Mod Kit $46.99
Eleaf iStick P100 Pod System Vape Kit is equipped with a 4.5ml large-capacity Pod cartridge, made of environmentally friendly food-grade PCTG plastic. The built-in mouthpiece at the top of the cartridge provides simplicity and comfort when you go for a vape.
http://www.3fvape.com/img/p/3/9/2/6/...me_default.jpg
Original Mechlyfe x Fallout Vape x Mrjustright1 Paramour SBS Mod Precio original $79, Solo ahora $75.
The Original Mechlyfe x Fallout Vape x Mrjustright1 Paramour SBS Mod (side-by-side mod), made of 304 Stainless steel & aluminum, is powered by 1 x 18650 / 20700 / 21700 battery (not included) with max 80W output. Mechlyfe Paramour SBS Mod is equipped with OLED screen and provides VW / TC (Ni, Ti and SS) / Bypass modes to meet different needs. Paramour SBS Mod can match with up to 25mm atomizers. The mod is with USB Type-C port for fast charge.
http://www.3fvape.com/img/p/3/9/2/6/...me_default.jpg
YFTK Squ Arise clone RTA Rebuildable Tank Vape Atomizer $27.99
The Air Discs diameter: 1 x 1mm / 2 x 0.8mm / 3 x 0.8mm / 4 x 0.8mm.
This Squ A[rise] Arise clone RTA supports to convince both as Direct to lung (DL) and Mouth to lung (MTL). The easily convert from DL to MTL and thus offers you complete flexibility.
http://www.3fvape.com/img/p/3/9/2/7/...me_default.jpg
YFTK Nextiny clone RDA Rebuildable Dripping Vape Atomizer $24.99
The YFTK Nextiny clone RDA is a rebuildable dripping vape atomizer with 22mm diameter. It is made from 316 Stainless Steel. Hope this RDA will bring you good vaping experience.
http://www.3fvape.com/img/p/3/9/2/7/...me_default.jpg
Original SMOK Nord 4 Replacement Nord RPM Empty Pod Cartridge for RPM Series Coils - 4.5ml (3 PCS) $5.99
Original SMOK Nord 4 replaceable empty Pod Cartridge is suitable for SMOK Nord 4 Pod System vape Kit. The pod Cartridge is refillable and you can just replace the coils without discarding the entire pod Cartridge.
Original SMOK Nord 4 Replacement Nord RPM 2 Empty Pod Cartridge for RPM 2 Series Coils - 4.5ml (3 PCS) $5.99
Original SMOK Nord 4 replaceable empty Pod Cartridge is suitable for SMOK Nord 4 Pod System vape Kit. The pod Cartridge is refillable and you can just replace the coils without discarding the entire pod Cartridge.
Original Eleaf iStick P100 Replacement Pod Cartridge - 4.5ml, PCTG, (1 PC) $3.99
Original Eleaf iStick P100 Pod Cartridge is a replaceable cartridge suitable for Eleaf iStick P100 Pod System Vape Kit. With 4.5ml capacity, this highly transparent pod cartridge is made of eco-friendly, food-grade PCTG plastic.
http://www.3fvape.com/img/p/3/9/2/7/...me_default.jpg
YFTK SQuip Tip Arise MTL clone 510 Drip Tip for MTL Vape Atomizer $2.99
The YFTK SQuip Tip A[rise] MTL 510 drip tip is perfect for your MTL vape atomizer. This SQuip Tip is made from stainless steel and POM.
http://www.3fvape.com/img/p/3/9/2/7/...me_default.jpg
YFTK Squ Arise clone RTA Replacement 2.0ml Tank Tube + 2.0ml Airflow Insert $6.99
The 2.0ml Tank Tube and 2.0ml Airflow Insert is suitable for YFTK SQuape A Rise Squ A[rise] clone RTA Vape Atomizer.
http://www.3fvape.com/img/p/3/9/2/7/...me_default.jpg
Original Smoant Santi 40W Pod System Vape Original Price $30.77, Now Only $24.99.
Smoant Santi Pod System Vape Kit comes with 1100mAh built-in battery and can fire up to 40W max. It is compatible with 4 dedicated coils: S-1 0.4ohm coil (not included) for DL, S-2 0.6ohm (pre-installed) for RDL, S-3 1.2ohm coil (not included)for MTL, S-RBA (not included)for DIY. In addition, it utilizes new wire material ERNiCrMo with mesh structure, which will bring pure flavor and extend the lifespan of wire.
https://www.3fvape.com/392881-home_d...35ml-06ohm.jpg
Original Clear Frosted Ultroner x Fallout Vape Gaea 200W Vape Box Mod Original Price $59.8, Now Only $55.9.
The Original Ultroner x Fallout Vape Gaea 200W Vape Box Mod features Sevo-200C chipset with ergonomic design and fashionable appearance. Ultroner Gaea Box Mod is powered by dual 21700 / 20700 / 18650 batteries (18650 battery adapter included. batteries not included) with max 200W output. Ultroner x Fallout Vape Gaea mod adopts high definition screen and supports max 33mm diameter tanks.
The authentic Ultroner x Fallout Vape Gaea 200W VW Vape Box Mod supports variable wattage range from 5W to 200W.
http://www.3fvape.com/img/p/3/9/2/8/...me_default.jpg
Smoant Santi Empty Pod Cartridge $4.99
Smoant
http://www.3fvape.com/img/p/3/9/2/9/...me_default.jpg
Smoant Santi Pod S1 DL 0.4ohm Coil (3 PCS) $6.99
Smoant S-1 DL Mesh Coil is suitable for Smoant Santi Pod System / Pod Cartridge. The Mesh coil is 0.4ohm for DL Vaping. Comes with 3 PCS / Pack.
Smoant Santi Pod S2 RDL 0.6ohm Coil (3 PCS) $6.99
Smoant S-2 RDL Mesh Coil is suitable for Smoant Santi Pod System / Pod Cartridge. The Mesh coil is 0.6ohm for DL Vaping. Comes with 3 PCS / Pack.
Smoant Santi Pod S3 MTL 1.2ohm Coil (3 PCS) $6.99
Smoant S-3 MTL Mesh Coil is suitable for Smoant Santi Pod System / Pod Cartridge. The Mesh coil is 1.2ohm for MTL Vaping. Comes with 3 PCS / Pack.
Smoant Santi Pod RBA Coil (1 PC) $6.99
Smoant RBA Coil Deck is suitable for Smoant Santi Pod System / Pod Cartridge. The RBA coil supports for MTL / DL / RDL Vaping.
http://www.3fvape.com/img/p/3/9/2/9/...me_default.jpg
Damn Vape Mongrel Glass Cap $3.99
Damn Vape Mongrel RDA Vape Atomizer Replacement Glass Top Cap features side dual airflow holes for more air inlet to coils. Damn Vape Mongrel Glass Cap provides visible vaping due to transparent glass material.
http://www.3fvape.com/img/p/3/9/2/9/...me_default.jpg
Damn Vape Mongrel Fused Clapton Coils (5 PCS) $1.99
Damn Vape Mongrel RDA Vape Atomizer Replacement Glass Top Cap features side dual airflow holes for more air inlet to coils. Damn Vape Mongrel Glass Cap provides visible vaping due to transparent glass material.
http://www.3fvape.com/img/p/3/9/2/9/...me_default.jpg
Golisi S2 2.0A Smart Charger with LCD Screen US Plug - S2 Smart Charger $23.99
Golisi S2 Charger adopts an upgraded micro-processor which enables the large LCD screen to show the charging information clearly: output current, charging state, battery charging time and battery type. It can also display battery voltage and capacity information by clicking the side button.
http://www.3fvape.com/img/p/3/9/2/9/...me_default.jpg
O Rings for Smok TFV8 Atomizer TFV8 - O Ring $1.99
SMOKTech Replacement O-Ring Set is suitable for SMOK TFV8 Vape Atomizer.
http://www.3fvape.com/img/p/3/9/2/9/...me_default.jpg
Never Normal Whistle V2 Clone 510 Drip Tip + Button + Small Button for dotMod dotAIO Pod $12.99
The Never Normal Whistle V2 Clone 510 Drip Tip + Button + Small Button Set is made from PMMA and is suitable for dotMod dotAIO Pod System.
http://www.3fvape.com/img/p/3/9/2/9/...me_default.jpg
dotaio screws (5 PCS) $3.59
Replacement Screws is made from stainless steel and is suitable for dotMod dotAIO Pod System.
http://www.3fvape.com/img/p/3/9/2/9/...me_default.jpg
Cthulhu Hastur Mod 88W TC Mod Original Price $85, Now Only $75.99.
Cthulhu Hastur 88W TC VW Vape Box Mod with simple and elegant appearance is made of 304 food-grade steel bat tery tube and aviation aluminum with high quality cnc machining technology, which is powered by single 18650 battery with 88W Max.
http://www.3fvape.com/img/p/3/9/3/0/...me_default.jpg
SXK Alien EVL RAB Bridge Tank Clone for SXK BB / Billet Box Original Price $29.9, Now Only $27.5.
The SXK Alien EVL clone RBA Bridge Tank is a rebuildable atomizer designed for Billet Box / SXK BB 70W / 60W Box Mod Kit. The RBA is made from 316 stainless steel and PC tank with 4.0ml capacity, it is equipped with a single coil deck and an adjustable air inlet using inserts. Comes with 5 Airflow insert sizes: 1.0 / 1.5 / 2.0 / 2.5 / 3.0mm.
https://www.3fvape.com/393173-home_d...20-25-30mm.jpgSXK Replacement PEI Tank Tube for EVL Alien RBA Bridge Tank Original Price $11.9, Now Only $8.9.
The SXK Replacement PEI Tank Tube is suitable for Alien EVL RBA Bridge Tank. Holds 4.0ml capacity.SXK Replacement PC Tank Tube for EVL Alien RBA Bridge Tank Original Price $9.9, Now Only $7.5.
The SXK Replacement PC Tank Tube is suitable for EAlien VL RBA Bridge Tank. Holds 4.0ml capacity.Original Vandy Vape A1 Superfine MTL Fused Clapton Wire $4.89
The Original Vandy Vape A1 Superfine MTL Fused Clapton Wire is suitable for RDA / RTA / RDTA Vape Atomizer. The wire is with 32GA x 2(=) + 38GA and 10ft length.and 30GA x 2 + 38GA and 10ft length also available on 3fvape.com
https://www.3fvape.com/393111-home_d...-38ga-10ft.jpgOriginal IJOY Aria Pro Pod System Kit 25W 900mAh w/ Aria Opod Open Pod Cartridge Original Price $30.99, Now Only $21.99.
IJOY Aria Pro Kit is a compact vape kit with a Open pod cartridge. IJOY Aria Pro is made of durable zinc alloy and with compact size for comfortably in any pocket and is perfect for vaping on the go. IJOY Aria Pro equipped with a long-lasting with 900mAh battery that is conveniently fast recharged through a type-c port. On the side of the device, you will find the fire button and a 0.69-inch single-color display screen. Some rivet-like bumps thing on the other side is embedded in a panel. Additionally, the Aria Pro supports both draw-activated and button-activated vaping to let you control the way you vape. Built-in Univ.mini chipset, the maximum output power is 25W and has intelligent automatic matching technology, you can select the appropriate power according to the installed coil, so as to minimize the setup and maintenance work.
https://www.3fvape.com/393110-home_d...l-06-10ohm.jpgOriginal IJOY Aria Opod Pod Cartridge $6.99
IJOY Aria Pro Kit comes with Aria Opod open pod cartridge with 1.0ohm coil. With 3.0ml capacity and use a transparent pod design for easily checking e-liquid levels in real-time. Aria Opod pod cartridge is a refillable pod cartridge, which is filled by opening the side plug and integrates two coils with different resistance values.0.6ohm version also available on 3fvape.com
https://www.3fvape.com/393076-home_d...0ohm-2-pcs.jpgOriginal Xyzvape Disposable Drip Tip Taster Mouthpiece for Uwell Caliburn G Pod Cartridge $2.49
The Original Xyzvape Disposable Drip Tip Taster Mouthpiece is made from PC and is suitable for Uwell Caliburn G Pod System / Pod Cartridge.
1 PC / Pack
https://www.3fvape.com/393066-home_d...nt-pc-1-pc.jpgOriginal SXK Supbox Pro 60W TC VW Vape Box Mod Kit $138.8
The Original SXK Supbox Pro 60W Box Mod Kit is built-in Evolv DNA 60 Chipset and adopts creative design, compatible with Most accessories for Billet Box and all 510 atomizers within 24mm diameter. Provide more personalized accessories such as battery tube and outside case. Comes with 1.1ohm and 0.6ohm cotton coil for choice.
https://www.3fvape.com/393248-home_d...60-chipset.jpgOriginal Uwell Caliburn G 18W Pod System Vape Starter Kit CRC Edition Original Price $29.99, Now Only $22.98.
The original Uwell Caliburn G Pod System Vape starter Kit is the upgrade version of Caliburn, works with 690mAh built-in battery and can fire up to max 18W output. Uwell Caliburn G Pod System Vape kit can vape directly through air pressure sensor or manual button to start vaping. Uwell Caliburn G Pod cartridge comes with 2.0ml capacity with top-fill and leakproof design. Uwell Caliburn G pod cartridge supports two different airflows: restricted DTL vaping (when the air inlet of the pod and the air inlet of the device are close to each other) and MTL vaping (when the air inlet of the pod and the air inlet of the device are far away from each other).
This is the CRC Version
https://www.3fvape.com/393233-home_d...rc-version.jpgOriginal Uwell Replacement Pod Cartridge for Caliburn G / Koko Prime Pod System Original Price $10.63, Now Only $7.99.
The original Uwell Caliburn G Pod Cartridge is suitable for Uwell Caliburn G / KOKO Prime Pod System Vape Kit. It comes with 1.0ohm Coil, holds 2.0ml e-juice capacity and comes with top filling design for easy refilling
https://www.3fvape.com/393187-home_d...rc-version.jpgOriginal Uwell Replacement Coil Head for Caliburn G / Koko Prime Pod System Original Price $10.99, Now Only $7.99.
The authentic Uwell Caliburn G Coil is designed for Caliburn G / Caliburn KOKO Prime Pod System Vape Starter Kit. Featuring 1.0ohm and 0.8ohm coil resistance (2 kinds optionsl), it will provide you great vaping experience. 4 PCS each pack.
https://www.3fvape.com/393175-home_d...0ohm-4-pcs.jpg
Original VOOPOO Drag S & Vmate Pod System Limited Edition $43.99
The VOOPOO DRAG S VW Mod Pod Kit is a compact and ergonomic pod mod system kit that consists of a 4.5ml pod cartridge and a 2500mAh built-in battery. The pod cartridge adopts a bottom refilling design and innovative infinite airflow system for the most comfortable experience. The Kit comes with a PnP-VM1 0.3ohm Coil and a PnP-VM5 0.2ohm Coil, it is also compatible with the other PnP coils, which can bring you DL and MTL vaping experience. As for the mod, it features adjustable power in the range of 5W to 60W. Monitored by GENE.TT chip, it can ignite within 0.001s, and also provides intelligent functions such as PUFF recording, SCORE ranking, SMART switching start mode, and so on. Moreover, there are 7 safety protections to ensure your vaping safety.
The Original VOOPOO Vmate Pod Kit has an integrated 900mAh battery, 3.0ml integrated coil cartridge, 17W maximum output power, with Type-C 5V / 1A fast charging, and adopts a new generation of atomization technology to produce a strong flavor. Vmate Pod Kit has an excellent flavor experience, coupled with an easy-to-use and lightweight design suitable for all experience levels vapers.
https://www.3fvape.com/393488-home_d...00mah-560w.jpg
GeekVape P Mesh Coil for Aegis Boost Pro Pod System / Pod Cartridge $11.99
GeekVape P Mesh Coil is compatible with Aegis Boost Pro System Vape Kit / Pod Cartridge. The 0.4ohm Mesh Coil will supply huge and smooth vapor clouds. 5 PCS each pack.The 0.2ohm Mesh Coil will supply huge and smooth vapor clouds. 5 PCS each pack.
https://www.3fvape.com/393371-home_d...4ohm-5-pcs.jpg
Uwell Tripod Pod System with 1000mAh Charging Case $36.99
Original Uwell Tripod Pod System Kit is a perfect combination of an excellent pod system and a powerful charging case. The Tripod Kit includes a lightweight and smart Tripod pod system, a portable charging case, and three refillable pod cartridge. With Uwell Tripod Kit, you can fully charge for long-lasting vaping anytime, anywhere, and enjoy your favorite e-liquid anytime. The charging case is compact and lightweight, with a removable smart pad inside, which is easy to open or close, integrate a Type-C port on the side, and an LED indicator plate at the bottom. When the LED indicator on the charging box is off, touch the center of the indicator board several times with your finger to wake up the indicator board to indicate the current power level and charging status. The capacity of the charging case is 1000mAh. Easy to hold in the palm of your hand or put in any pocket. When you are out and about, keep charging the pod system.
https://www.3fvape.com/393668-home_d...20ml-12ohm.jpg
Coilhome TNT-VM1 Single Mesh Coil for Voopoo VINCI / VINCI R / VINCI X $7.99
The original Coilhome TNT-VM1 Single Mesh Coil is with 0.3ohm Resistance and is suitable for Voopoo VINCI / VINCI R / VINCI X Pod System. Comes with 5 PCS / Pack.
https://www.3fvape.com/393584-home_d...240w-5-pcs.jpg
SMOKTech Morph 2 Kit 230W Box Mod with TFV18 Tank $53.99
The SMOK Morph 2 Kit is an updated version of its predecessor SMOK Morph 219 Kit. Through a more comfortable operating experience, more powerful performance, with a new sub-ohm tank and a new mesh coil to optimize all aspects, is a highly comprehensive user- friendly device.
SMOK Morph 2 Kit is composed of SMOK Morph 2 230W Vape Box Mod and SMOK TFV18 Tank Vape Atomizer. Morph 2 is designed with zinc alloy to improve durability, while the soft leather covered on the surface has a comfortable touch. The front is decorated with a 0.96-inch display, control buttons, and charging port, and the fire button has been placed on the side. SMOK Morph 2 Box Mod is powered by 2 x 18650 batteries (not included). The dual 18650 battery has double battery life and sufficient power, creating conditions for immersive vaping. Through the USB Type-C port, you can run balanced charging at a maximum speed of 2.0A inside the mod, which not only extends the life of the battery but also shortens the charging time. Morph 2 is equipped with an IQ-S chip that not only provides a very fast 0.001 second firing time but also provides convenient functions such as password protection and customizable output modes (Power/TC) to support different vape styles.
https://www.3fvape.com/393647-home_d...ohm-033ohm.jpg
Original SMOKTech SMOK Morph 2 230W TC VW Vape Box Mod $37.99
The Original SMOKTech SMOK Morph 2 Vape Box Mod is designed with zinc alloy to improve durability, while the soft leather covered on the surface has a comfortable touch. The front is decorated with a 0.96-inch display, control buttons, and charging port, and the fire button has been placed on the side. SMOK Morph 2 Box Mod is powered by 2 x 18650 batteries (not included). The dual 18650 battery has double battery life and sufficient power, creating conditions for immersive vaping. Through the USB Type-C port, you can run balanced charging at a maximum speed of 2.0A inside the mod, which not only extends the life of the battery but also shortens the charging time. Morph 2 is equipped with an IQ-S chip that not only provides a very fast 0.001 second firing time but also provides convenient functions such as password protection and customizable output modes (Power/TC) to support different vape styles.
http://www.3fvape.com/img/p/3/9/3/8/...me_default.jpg
Original Hellvape Hellbeast RDA Rebuildable Dripping Vape Atomizer w/ BF Pin Original Price $36.9, Now Only $25.99.
The Original Hellvape Hellbeast RDA is an innovative 3-level airflow driven rebuildable dripping vape atomizer. The Hellbeast RDA is built for creating huge clouds of vapor. Hellbeast RDA is made of durable stainless steel in 24mm diameter, with a new build deck, and adopts a staggered column hole design, providing enough space for coil replacement. This build deck structure supports both clockwise or counterclockwise coil installation. Hellbeast RDA adopts innovative trinity stepped airflow and 72 x 1.2mm air holes for precise flavor. Trinity stepped honeycomb airflow hole+2 layers of shell airflow hole to provide 3 level airflow. Hellbeast RDA's top cap matches 810 drip tip, brings a great DL vaping. The pre-fitted 510 pin means the Hellbeast RDA can be used with standard vape devices straight out of the box. While the BF (Bottom Feeding) pin enables it to be used with squonk box mods. The Hellvape Hellbeast RDA provides an undeniably tasty vape with a balance of both flavor enhancement and massive cloud production.
http://www.3fvape.com/img/p/3/9/3/8/...me_default.jpg
Original Uwell Tripod Replacement Pod Cartridge $7.99
Original Uwell Tripod PCC Pod Cartridge holds 2.0ml capacity and is suitable for Tripod PCC Pod System Vape Kit. It is built with a 1.2ohm coil and features side filling system. You can also enjoy great flavor, massive clouds and smooth throat hit with it. 4 PCS each pack.
http://www.3fvape.com/img/p/3/9/3/8/...me_default.jpg
Original SMOKTech SMOK TFV18 Tank Replacement Meshed Coil Head $10.99
The SMOK TFV18 0.33ohm Meshed Coil is made of nickel-chromium alloy and organic cotton and have a large mesh design to promote the fastest and most uniform heating and optimize flavor. This makes TFV18 a high-performance atomizer and requires a lot of air cooling. This is achieved by a particularly high tank base, which allows the maximum amount of air to reach the coil.3 PCS / Pack.
https://www.3fvape.com/393881-home_d...3ohm-3-pcs.jpg
Original SMOKTech SMOK TFV18 Tank Replacement Dual Meshed Coil $11.99
The SMOK TFV18 0.15ohm Dual Meshed Coil is made of nickel-chromium alloy and organic cotton and have a large mesh design to promote the fastest and most uniform heating and optimize flavor. This makes TFV18 a high-performance atomizer and requires a lot of air cooling. This is achieved by a particularly high tank base, which allows the maximum amount of air to reach the coil.3 PCS / Pack.
http://www.3fvape.com/img/p/3/9/3/8/...me_default.jpg
Original SMOKTech SMOK TFV18 Tank Replacement RBA Coil Deck $6.99
The Original SMOKTech TFV18 RBA Coil Deck is suitable for SMOK TFV18 Tank Atomizer. It will switch your TFV18 into a RTA for DIY fun.
http://www.3fvape.com/img/p/3/9/3/8/...me_default.jpg
Original SMOKTech SMOK TFV18 Sub Ohm Tank Clearomizer Vape Atomizer $26.99
Original SMOK TFV18 TFV18 Tank has a diameter of 31.6mm and a raised base to ensure maximum airflow and maximum coil saturation. On the top is a wide-bore resin drip tip, which has anti-scaling and odorless performance, and can accurately capture streams of vapor, providing a comfortable vaping experience. SMOK TFV18 Tank is equipped with a bubble glass with a maximum capacity of 7.5ml (the storage capacity varies according to the different coils installed inside). It can be easily filled from above using the press-to-slide top filling system with a child-proof safety lock and improved sealing. You have to press the button and slide the top cap in the right way to expose the filling port, enhancing the security of use and ending juice leaking.
http://www.3fvape.com/img/p/3/9/3/9/...me_default.jpg
Flash e-Vapor V4.5S+ RTA Clone $14.99
The Flash e-Vapor V4.5S+ clone RTA Rebuildable Tank Vape Atomizer is constructed from Stainless Steel in 23mm Diameter. The RTA comes with a 4.5ml E-juice capacity glass tank tube, 1 x air screw mounted sealed, 2 x 2.1mm airflow insert, 1 x 0.9mm airflow insert, and 1 x 1.0mm airflow inserts. The RTA features dual post build deck and adjustable airflow for MTL vaping.The Flash e-Vapor V4.5S+ comes with 2 x stainless steel wicks to make a Good Liquid Flow.
http://www.3fvape.com/img/p/3/9/4/0/...me_default.jpg
ShenRay Squ Arise Clone RTA Replacement MTL Air Discs - 1 x 0.8mm, 1 x 1.0mm, 2 x 0.8mm, 3 x 0.8mm, 4 x 0.8mm, 5 x 0.8mm (6 PCS) $5.99
These MTL Air Discs is suitable for ShenRay SQuape A Rise Squ A[rise] clone RTA Vape Atomizer to reduce the airflow directly at the coil. Comes with 6 different size Air Discs.
http://www.3fvape.com/img/p/3/9/4/0/...me_default.jpg
ShenRay Squ Arise Clone RTA Replacement 2.0ml Tank Tube + 2.0ml Airflow Insert $4.99
These MTL Air Discs is suitable for ShenRay SQuape A Rise Squ A[rise] clone RTA Vape Atomizer to reduce the airflow directly at the coil. Comes with 6 different size Air Discs.
http://www.3fvape.com/img/p/3/9/4/0/...me_default.jpg
EVL Dot Spot Polycarbonate RBA Bridge Clone for the DotMod DotAIO AIO Pod $24.99
The EVL Dot Spot clone RBA is a bridge for the DotMod DotAIO AIO Pod. The Dot Spot clone RBA is made of stainless steel and polycarbonate to holds 2.0ml capacity. The tank has a refilling port on the side with silicone stopper.The air hole is located between the two posts through which the fresh air hits the winding directly from below. The various MTL reducers, which are available in sizes 1.0mm, 1.5mm, 2.0mm, 2.5mm and 3.0mm, can also be inserted into this hole.
http://www.3fvape.com/img/p/3/9/4/1/...me_default.jpg
Original YiHi SXmini SL Class 100W SX485J TC VW Box Mod Original Price $174.99, Now Only $59.99.
The original YiHi SXmini SL Class SX485J 100W vape Box Mod is the next luxurious device from YiHi's unrivaled line-up, powered by 18650 / 20700 / 21700 battery (not included) platform with a premium frame chassis and high-end grip design. The high-end impression is complemented with ergonomic construction design, making the SXmini SL Class a phenomenal all-day vape option. Accessed via a threaded battery cover at the bottom of the device, the SL Class SX485J can support single 18650, 20700, or 21700 battery for wide range of vape battery options. The internal YiHi SX485J Chipset provides tremendous output range of 5 to 100W alongside a suite of functionality such as full temperature control support and efficient processor for accurate and customizable experience. The inclusion of SXi-Q Intelligent Taste Curve Technology features an algorithmic calculation that allows users to set, fine tune, and save 5-memory output curves.
http://www.3fvape.com/img/p/3/9/4/1/...me_default.jpg
Eleaf iStick T80 Kit 3000mAh 80W Box Mod with GTL Pod Tank $54.9
Original Eleaf iStick T80 Kit with GTL Pod Tank shows a multifunction starter vape kit consisting of a new color iStick T80 Mod and a GTL Pod Tank with a 510 thread base.
http://www.3fvape.com/img/p/3/9/4/1/...me_default.jpg
Original SXK ETU for Supbox / Billet / BB / Bantam Revision - Compatible with Voopoo PnP Series / Vaporesso GTX Series Coil Original Price $9.9, Now Only $8.6.
The SXK ETU is including PC Tank, Stainless Steel Connector and POM Base. The SXK ETU is Compatible with Voopoo PnP Series Coil head and Vaporesso GTX Coil Head. It is suitable for Billet Box / SXK BB 70W / DNA 60W, SXK Supbox Pro 60W / SXK Supbox 70W and SXK Bantam Revision 30W Mod Kit. Please Note: The ETU only, the coil and the mod on the image is not included.
http://www.3fvape.com/img/p/3/9/4/1/...me_default.jpg
Original Rincoe Jellybox Mini 80W Box Mod with Jellytank Kit Original Price $49.9, Now Only $37.99.
The authentic Rincoe Jellybox Mini 80W Kit is combined with Jellybox Mini Mod and Jellytank.The Rincoe Jellybox Mini Box Mod is made of durable zinc alloy & high end PC, which is sturdy and anti-drop. The whole machine adopts a unique transparent design from the tank to mod, providing stunning aesthetics and strong visual impact. This compact, sleek, user-friendly device is powered by 1 x 18650 / 20700 / 21700 battery (not included). It's very easy to remove and install batteries and the doors all fit very stable. Fast charging through the Type-C port under the side. The Jellybox Mini mod has a proprietary RINCOE board on the internal side, which not only provides a variety of security protections but also provides a variety of modes for you to customize the performance of the device. Variable Wattage mode allows you to select precise power output, maximum support 80W. The temperature control suite can be used for more custom coil types, like Stainless Steel and Titanium. Jellybox also features 6 LED lights and shines through into the full device lighting it up.The Rincoe Jellytank is an adjustable translucent tank with a detachable threaded 510 connection. The Jellytank holds 4.8ml capacity and is made of environmentally friendly food-grade PCTG plastic, which has an excellent vaping experience. The built-in proprietary drip tip provides simplicity and comfort. The bottom of the pod has a filling port, unscrew the bottom base, open the white silicone case to fill the e-juice. There is a narrow slot on the thread base to control the incoming airflow. Jellytank features mesh coil 0.15ohm makes the clear flavor and dense cloud.
http://www.3fvape.com/img/p/3/9/4/1/...me_default.jpg
Original Rincoe Jellybox 228W Box Mod with Jellytank Kit Original Price $54.9, Now Only $40.99.
The original Rincoe Jellybox 228W Kit is combined with Rincoe Jellybox 228W Box Mod and Jellytank.The Rincoe Jellybox 228W vape box mod can provide a variety of sub-ohm experience and high power output. Rincoe Jellybox 228W vape box mod uses a transparent PC shell and a zinc alloy frame to make the entire mod highlight the visual beauty. The inside of the mod and the battery packaging can be seen directly from the outside. The innovative design of Jellybox makes it unique. The body size is compact while providing a comfortable grip. The complete control panel has a round fire button, a display screen, and a pair of adjustment buttons. The mod runs on two 18650 batteries (not included) and has an impressive maximum power output of 228W. To access the battery chamber, simply press and lift open the cap on the bottom of the device. And the Jellybox mod implements 5V / 2A quick-charging via the Type-C USB port, so you can spend less time charging. There are 6 LED lights on both sides of the transparent panel of Jellybox, the color of the lights can be changed by changing the UI settings. To turn off the LED light, just press the fire button and the right button together in VW mode.The Rincoe Jellytank is an adjustable translucent tank with a detachable threaded 510 connection. The Jellytank holds 4.8ml capacity and is made of environmentally friendly food-grade PCTG plastic, which has an excellent vaping experience. The built-in proprietary drip tip provides simplicity and comfort. The bottom of the pod has a filling port, unscrew the bottom base, open the white silicone case to fill the e-juice. There is a narrow slot on the thread base to control the incoming airflow. Jellytank features mesh coil 0.15ohm makes the clear flavor and dense cloud.
http://www.3fvape.com/img/p/3/9/4/1/...me_default.jpg
Original Rincoe Jellybox Mini 80W Box Mod Original Price $39.9, Now Only $31.99.
The Rincoe Jellybox Mini Box Mod is made of durable zinc alloy & high end PC, which is sturdy and anti-drop. The whole machine adopts a unique transparent design from the tank to mod, providing stunning aesthetics and strong visual impact. This compact, sleek, user-friendly device is powered by 1 x 18650 / 20700 / 21700 battery (not included). It's very easy to remove and install batteries and the doors all fit very stable. Fast charging through the Type-C port under the side. The Jellybox Mini mod has a proprietary RINCOE board on the internal side, which not only provides a variety of security protections but also provides a variety of modes for you to customize the performance of the device. Variable Wattage mode allows you to select precise power output, maximum support 80W. The temperature control suite can be used for more custom coil types, like Stainless Steel and Titanium. Jellybox also features 6 LED lights and shines through into the full device lighting it up.
http://www.3fvape.com/img/p/3/9/4/2/...me_default.jpg
Original Rincoe Jellybox 228W Box Mod Original Price $44.9, Now Only $33.99.
The original Rincoe Jellybox 228W vape box mod can provide a variety of sub-ohm experience and high power output. Rincoe Jellybox 228W vape box mod uses a transparent PC shell and a zinc alloy frame to make the entire mod highlight the visual beauty. The inside of the mod and the battery packaging can be seen directly from the outside. The innovative design of Jellybox makes it unique. The body size is compact while providing a comfortable grip. The complete control panel has a round fire button, a display screen, and a pair of adjustment buttons. The mod runs on two 18650 batteries (not included) and has an impressive maximum power output of 228W. To access the battery chamber, simply press and lift open the cap on the bottom of the device. And the Jellybox mod implements 5V / 2A quick-charging via the Type-C USB port, so you can spend less time charging. There are 6 LED lights on both sides of the transparent panel of Jellybox, the color of the lights can be changed by changing the UI settings. To turn off the LED light, just press the fire button and the right button together in VW mode.
http://www.3fvape.com/img/p/3/9/4/2/...me_default.jpg
Original SMOKTech SMOK Rigel Mini Kit 80W Box Mod with TFV9 Mini Tank $34.99
Original SMOKTech SMOK Rigel Mini Box Mod Vape Kit is combined with SMOK Rigel Mini Box Mod and TFV9 Mini Tank.
https://www.3fvape.com/394405-home_d...-015-06ohm.jpg
BY-kA V.9 V9 MTL RTA Full Kit w/ Nano Set + PEI Tank Clone $36.99
The BY-kA V.9 V9 MTL RTA Rebuildable Tank Atomizer full kit is including 5.0ml standard tank, 3.0ml Nano Set Tank tube and 5.0ml PEI long Tank Tube, holds 3.0 / 5.0ml capacity and in 22mm Diameter. The BY-kA V.9 V9 MTL RTA is with top refilling system for easy refilling and bottom airflow adjustable for MTL Vaping. This is the full kit Version including 5.0ml standard RTA, 3.0ml nano set and 5.0ml long PEI Tank Tube
https://www.3fvape.com/394414-home_d...m-diameter.jpg
Vape Systems BY-kA V.9 V9 MTL RTA Clone 5ML Standard $24.99
The BY-kA V.9 V9 MTL RTA Rebuildable Tank Atomizer Standard Version holds 5.0ml capacity and in 22mm Diameter. The BY-kA V.9 V9 MTL RTA is with top refilling system for easy refilling and bottom airflow adjustable for MTL Vaping. This is the Standard Version in 5.0ml.
https://www.3fvape.com/394409-home_d...m-diameter.jpg
Vape Systems BY-kA V.9 V9 MTL Nano Set Clone $23.99
The BY-kA V.9 V9 MTL RTA Rebuildable Tank Atomizer Nano Version holds 3.0ml capacity and in 22mm Diameter. The BY-kA V.9 V9 MTL RTA is with top refilling system for easy refilling and bottom airflow adjustable for MTL Vaping.This is the Nano Version in 3.0ml.
https://www.3fvape.com/394408-home_d...m-diameter.jpg
Original Advken Potento X Pod System Vape Kit $24.99
Original Advken Potento-X Pod System Vape Kit is powered by 950mAh built-in battery, with max output power 4.2V. It is made of Aluminum Alloy and PCTG, holds 2.5ml e-juice capacity, fast type-c charging port. Comes with 1.0ohm and 1.2ohm mesh coil. Advken Potento-X Pod System Kit is lightweight, portable, provides better experience, better flavor.
https://www.3fvape.com/394352-home_d...0ohm-12ohm.jpg
Replacement Standard Set Chimney + Tank Tube for KA V9 Clone RTA $7.99
The Replacement Standard Set including Chimney and Tank Tube is suitable for KA V9 clone RTA and holds 5.0ml capacity.
https://www.3fvape.com/394326-home_d...el-pc-50ml.jpg
Replacement Nano Set Chimney + Tank Tube for KA V9 Clone RTA - Silver, Stainless Steel + PC, 3.0ml $7.99
The Replacement Nano Set including Chimney and Tank Tube is suitable for KA V9 clone RTA and holds 3.0ml capacity.
https://www.3fvape.com/394324-home_d...el-pc-30ml.jpg
Replacement PEI Long Tank Tube for KA V9 Clone RTA $5.99
The Replacement PEI Long Tank Tube is suitable for KA V9 clone RTA and holds 5.0ml capacity.
https://www.3fvape.com/394323-home_d...brown-50ml.jpg
Original SMOKTech SMOK Rigel Mini Box Mod $25.99
The SMOK Rigel Mini Box Mod is made of durable zinc alloy, with an amazing texture. The outer layer is made of soft rubber coating, and it feels comfortable when holding Rigel Mini. Rigel Mini Box Mod is powered by 1 x 18650 battery (not included) to provide continuous power. Rigel Mini Box Mod uses Type-C for fast charging, thereby minimizing downtime, and the output current is as high as 1.4A. Using the brand's legendary chipset technology, consistent and reliable multiple functions can be achieved. The power range of 1W~80W allows you to enjoy the most satisfying clouds and flavors throughout the day according to your power preferences. There are a comprehensive 0.96 inch TFT color display and navigation buttons on the device, allowing you to easily customize the settings.
http://www.3fvape.com/img/p/3/9/4/5/...me_default.jpgOriginal SMOKTech SMOK TFV9 Mini Sub Ohm Tank Clearomizer Vape Atomizer $18.99
Original SMOK TFV9 Mini Tank Vape Atomizer is with 23mm diameter 23mm, it becomes lighter and smaller and holds 3.0ml of e-juice. With the child-safe filling design, this is a safer tank without sacrificing convenience. The top cover can be lifted and slid open so that a large filling port can be used for e-liquid filling. The tank is completely made of stainless steel, which is easy to clean without any problems and is also very suitable for compact devices. With internal mesh heating elements, the TFV9 Mini Tank consumes less power and can generate more steam and flavor from your favorite e-juice. The package includes two V9 Meshed 0.15ohm Coil. The TFV9 Mini Tank also cross-compatible with the TFV8 Baby Coil Technology (coils not included). The bottom airflow supports intense taste. Using the redesigned airflow system, the airflow can be adjusted by rotating the airflow ring at the bottom of the tank to meet different vaping needs. Since the inhaled air enters directly from below through the coil head, so it doesn't lose any aroma. There is a gold-plated 510 threading connection on the base of the TFV9 Mini tank, which can increase friction resistance and enhance conductivity.
http://www.3fvape.com/img/p/3/9/4/5/...me_default.jpgOriginal GeekVape Aegis Boost LE Bonus Pod System Vape Kit with 5 Coils Original Price $42.99, Now Only $32.99.
Original GeekVape Aegis Boost LE Bonus Kit is the luxurious version of the original Aegis Boost 40W Pod System Vape Starter Kit with 5 GeekVape B series coils. It redefines the way luxury is integrated into the vaping experience, designed for the highest experience. The design in the Aegis Boost LE Bonus Kit is still applicable to the Aegis series. It consists of a stain-resistant and tear-resistant leather sleeve, rust-proof and corrosion-resistant zinc alloy body frame, Food grade silicone rubber for water-proofing. The Aegis Boost LE Bonus weighs only 120g and is the lightest kit. With the built-in 1500mAh battery, it can provide a lot of power even if you are outside. The core of the kit is the AS chipset, with an output power of up to 40 watts, providing instantaneous ignition speed, and various safety circuits on the board. All settings can be checked at any time through the 0.42-inch OLED display.
http://www.3fvape.com/img/p/3/9/4/5/...me_default.jpgOriginal OBS Pluck Pod Mod Vape Starter Kit $29.99
Original OBS Pluck is a small and intelligent Pod Mod starter kit with a compact mod and maintenance-free tank, suitable for MTL & RDL vaping. Constructed with durable zinc-alloy and leather, the OBS Pluck Kit takes on an ergonomic, cylinder design that promotes a firm grip every time you vape. Pluck kit has a simple control panel, and the long style fire button occupies the entire front. On its upper part, there is a small LED indicator. The LED light shows 3 battery power indications when vaping with Pluck Kit, which could let you know Pluck battery life more clearly. The Pluck is powered by an internal 1500mAh battery that you can charge up quickly due to the device's 5V / 1A quick-charging capability via the USB Type-C charging port.
http://www.3fvape.com/img/p/3/9/4/4/...me_default.jpgOriginal SXK Unit Tank Unitank / Uni Tank for SXK Supbox / Supbox Pro Box Mod Kit / SXK BB - Acrylic, 5.0ml, New Version Original Price $8.9, Now Only $5.99.
The Original SXK Unit Tank / Unitank / Uni Tank is made from Acrylic with 5.0ml capacity. The new version is compatible most of the BB RBA Bridge. The New Version is new refilling port, and the parting line is upper than the old one.The Tank is suitable for SXK Supbox / Supbox Pro / Billet Box Mod Kit / SXK BB 60W / 70W Vape Box Mod Kit
http://www.3fvape.com/img/p/3/9/4/7/...me_default.jpgSXK BY-kA V9 MTL RTA Nano Set Clone Original Price $29.8, Now Only $27.5.
The SXK BY-kA V.9 V9 MTL RTA Rebuildable Tank Atomizer Nano Version holds 3.0ml capacity and in 22mm Diameter. The BY-kA V.9 V9 MTL RTA is with top refilling system for easy refilling and bottom airflow adjustable for MTL Vaping. This is the Nano Version in 3.0ml.
http://www.3fvape.com/img/p/3/9/4/6/...me_default.jpgOriginal VXV Soulmate RTA Pod Cartridge for Voopoo Drag S / X / MAX / ARGUS Pro Original Price $29.99, Now Only $24.99.
The Original VXV Soulmate RTA Pod Cartridge is suitable for the adjustable bottom airflow of Voopoo Drag series and Argus Pro (Voopoo Drag S / X / MAX / ARGUS Pro Pod System). The VXV RTA Pod is with single coil building deck and holds 2.5ml capacity. The bottom refilling port is on the bottom with silicone plug.
http://www.3fvape.com/img/p/3/9/4/7/...me_default.jpgOriginal VXV Soulmate RTA Pod Replacement Tank Tube + 510 Drip Tip Original Price $9.99, Now Only $7.99.
The Original VXV Replacement Tank Tube and 510 Drip Tip is suitable for Soulmate RTA Pod Cartridge.
http://www.3fvape.com/img/p/3/9/4/6/...me_default.jpgSXK Replacement Standard Set Chimney + Tank Tube for KA V9 clone RTA 5.0ml Original Price $14.9, Now Only $12.5.
The SXK Replacement Standard Set including Chimney and Tank Tube is suitable for KA V9 clone RTA and holds 5.0ml capacity.
http://www.3fvape.com/img/p/3/9/4/6/...me_default.jpgSXK Replacement PEI Long Tank Tube for KA V9 clone RTA - 5.0ml Original Price $7.9, Now Only $6.5.
The SXK Replacement PEI Long Tank Tube is suitable for KA V9 clone RTA and holds 5.0ml capacity.
http://www.3fvape.com/img/p/3/9/4/6/...me_default.jpgSXK Replacement PEI Tank Tube for KA V9 clone RTA - 3.0ml Original Price $6.9, Now Only $5.5.
The SXK Replacement PEI Tank Tube is suitable for KA V9 clone RTA and holds 3.0ml capacity.
AV MIP5 Stackable Mechanical Mod Clone $20.99
The AV M1P5 Style mechanical mod comes with the mod only or with the stackable tube extension, powered by 1 / 2 x 18650 battery (not included). The AV MIP5 Style Mechanical Mod is with adjustable magnetic bottom firing button.
http://www.3fvape.com/img/p/3/9/4/8/...me_default.jpg
Replacement Resin 810 Drip Tip w/ O-Ring $1.79
The Replacement 810 Drip Tip is made from resin and comes with silicone O-Rings. It is suitable for RDA / RTA / RDTA / Sub Ohm Tank Vape Atomizer.
http://www.3fvape.com/img/p/3/9/4/7/...me_default.jpg
Original VAPJOY DIY Rebuild Kit for Caliburn G Coil - 0.8ohm, A1 Mesh Coil (10 PCS) + Cotton (20 PCS) $3.99
The Original VAPJOY DIY Rebuild Kit is suitable for Uwell Caliburn G coil. Comes with 10 PCS Mesh coil and 20 PCS Cotton.
http://www.3fvape.com/img/p/3/9/4/7/...me_default.jpg
Original OBS Pluck Tank Atomizer - 3.5ml, 1.0ohm / 0.4ohm $9.99
The Original OBS Pluck Pod Cartridge Atomizer consists of a transparent pod cartridge and an atomizer 510 base with an air ring. has an integrated proprietary drip tip, which can be slid back and forth through the top filling system to expose the filling port and close firmly. Two OM coils and replacements are readily available included. Perfect for RDL (restricted direct lung) and MTL (mouth to lung) vaping.
http://www.3fvape.com/img/p/3/9/4/7/...me_default.jpg
YFTK Squape A[rise] Squ Arise clone RTA - Black $29.99
YFTK SQuape A Rise Squ A[rise] clone RTA Vape Atomizer is made from 316 stainless steel and PSU. The 24mm RTA holds 4.0ml and supports DL / MTL Vaping.The Air Discs diameter: 1 x 1mm / 2 x 0.8mm / 3 x 0.8mm / 4 x 0.8mm.This Squ A[rise] Arise clone RTA supports to convince both as Direct to lung (DL) and Mouth to lung (MTL). The easily convert from DL to MTL and thus offers you complete flexibility.Comes with chimney air reducer.
Original Wotofo Profile M RTA Rebuildable Tank Vape Atomizer Original Price $37.95, Now Only $26.99.
The Original Wotofo Profile M RTA is a Mesh RTA Rebuildable Tank Vape Atomizer. The 24.5mm Mesh RTA is with stylish 810 drip tip on the easy-to-use push-open clone top cap, and the liquid filling hole is hidden under the top cap. The Mesh RTA comes with two tank tubes, the standard glass tube has a capacity of 3.1ml, while the spare PCTG bubble glass tube has a capacity of 4.0ml. Use push-open clone top cap to fill e-juice quickly and cleanly from above. Wotofo Profile M RTA adopts a postless build deck with an open fixture structure that ensures easy installation of mesh coil. Profile M RTA can utilize single coil / mesh sheet coils, side secured via Phillips screws, and is also compatible with nexMESH series steel mesh which is suitable for Profile / Profile Unity. And it has a well-designed top airflow system. The air passes through the continuously adjustable top AFC. With a porous honeycomb air outlet, this makes Profile M RTA almost completely leak-proof. The air can flow perfectly and evenly in the mesh hole, and force the flavor and vapor to be produced.
http://www.3fvape.com/img/p/3/9/4/9/...me_default.jpg
AV Able clone Vape Mechanical Mod $14.99
The AV Able clone mechanical mod is made from brass and aluminum. It is powered by 1 x 18650 battery (not included). The adjustable brass bottom-fire button with opposing earth magnet will be very easy for you to use. Carbon fiber sleeve for better heat dissipation.
http://www.3fvape.com/img/p/3/9/4/8/...me_default.jpg
AV Able clone Vape Mechanical Mod + Apocalypse GEN 2 clone RDA Kit $20.99
The Mechanical Mod Kit consists of AV Able clone mechanical mod and Apocalypse Gen 2 clone RDA.
The AV Able clone mechanical mod is made from brass and aluminum. It is powered by 1 x 18650 battery (not included). The adjustable brass bottom-fire button with opposing earth magnet will be very easy for you to use. Carbon fiber sleeve for better heat dissipation.
The Apocalypse Gen 2 clone RDA is with clamp design and has a massive 13mm space in each clamp which provides space for mounting the most complex and insane coil builds. The RDA is constructed from aluminum (cap) and stainless steel (base). Coupled with the 4mm deep juice well, 21mm build deck, durable post clamps and extended post screws, the Apocalypse Gen 2 clone RDA is a builder's dream.
http://www.3fvape.com/img/p/3/9/4/8/...me_default.jpg
Original Wotofo Profile M RTA Replacement NexMESH Clapton S Mesh Coil $4.99
The Original Wotofo NexMESH Clapton S Mesh Coil is made from Ni80 and A1 in 0.15ohm resistance. The Mesh-clone Clapton coil is mixed with Ni80 and A1, brings Maximized Performance,
Perfect for Wotofo Profile M RTA, 5 PCS / Pack
http://www.3fvape.com/img/p/3/9/4/8/...me_default.jpg
Original Wotofo Profile M RTA Replacement PCTG Tank Tube $1.99
The Original Wotofo Profile M RTA Replacement Tank Tube is made from PCTG and holds 4.0ml capacity.
http://www.3fvape.com/img/p/3/9/4/9/...me_default.jpg
Original Wotofo Profile M RTA Replacement Glass Tank Tube $1.99
The Original Wotofo Profile M RTA Replacement Tank Tube is made from Glass and holds 3.1ml capacity.
http://www.3fvape.com/img/p/3/9/4/9/...me_default.jpg
Original Wotofo Profile M RTA Replacement 810 Drip Tip $2.99
The Original Wotofo Replacement 810 Drip Tip is made from resin and suitable for Profile M RTA Mesh RTA Vape atomizer. This Wotofo 810 drip tip is also compatible with other vape atomizer with 810 connection.
http://www.3fvape.com/img/p/3/9/4/8/...me_default.jpg
Original Dovpo Riva DNA250C 200W Box Mod $149.99
The original DOVPO Riva DNA250C Vape Box Mod is powered by dual 18650 batteries (not included) mod features the EVOLV DNA 250C chipset to ensure the great performance from fast firing speed to various of advanced settings. On the appearance, DOVPO utilizes real leather with zinc alloy for the first time, results the great combination of great feeling and aesthetic. In a word, this DOVPO Riva DNA250C Mod is absolutely the competitor you can't be discounted.
http://www.3fvape.com/img/p/3/9/5/0/...me_default.jpg
Original SXK ETU for Supbox / Billet / BB / Bantam Revision - Compatible with SMOKTech SMOK RPM Series Coil Original Price $9.9, Now Only $8.6.
The SXK ETU is including PC Tank, Stainless Steel Connector and POM Base. The SXK ETU is Compatible with SMOKTech SMOK RPM Series Coil heads. It is suitable for Billet Box / SXK BB 70W / DNA 60W, SXK Supbox Pro 60W / SXK Supbox 70W and SXK Bantam Revision 30W Mo
http://www.3fvape.com/img/p/3/9/5/1/...me_default.jpg
Original YDDZ A1 510 Thread Adapter Connector for dotMod dotAIO $8.89
The YDDZ A1 510 Thread Adapter Connector is designed for dotMod dotAIO Pod System Vape Kit as a replacement part, which is made from POM (white Part) and Stainless Steel (Silver Part). With this 510 adapter, you can use 510 atomizer (RTA / RDA / RDTA / Tank) on your dotMod dotAIO Pod System.
http://www.3fvape.com/img/p/3/9/5/1/...me_default.jpg
Original YIHI SXmini SL Class 100W SX485J TC VW Box Mod Original Price $174.99, Now Only $59.99.
The Original YiHi SXmini SL Class SX485J 100W vape Box Mod is the next luxurious device from YiHi's unrivaled line-up, powered by 18650 / 20700 / 21700 battery (not included) platform with a premium frame chassis and high-end grip design. The high-end impression is complemented with ergonomic construction design, making the SXmini SL Class a phenomenal all-day vape option.
http://www.3fvape.com/img/p/3/9/5/1/...me_default.jpg
Original Oumier Blade TC VW Box Mod $45.99
The Original Oumier Blade is a high-power vape box mod with advanced technology and powerful performance. It supports IP67 waterproof and comes with an integrated 1.3" TFT screen with multi-touch support. Adopts ergonomic and durable shell design, made of high-quality materials. The box mod adjustment buttons have been integrated with the color touch screen, which is easy to use and the body is simpler and smoother.
http://www.3fvape.com/img/p/3/9/5/1/...me_default.jpg
Original Innokin EQ Fltr Pod System Heating Kit $25.99
The Original Innokin EQ FLTR Pod System is specially designed for smokers who want to quit smoking. This easy-to-use pod system has a filter similar to a cigarette.
http://www.3fvape.com/img/p/3/9/5/1/...me_default.jpg